Tutorial encontrado en la web. Cómo hacer una pluma de papel.

1. This feather is made from a dictionary page.
Now let us start ...
this is what you will need:

2. - Hymn pages (music sheets, dictionary pages, book pages)
- Scissors
- Tacky glue
- Wire cutters
- Cloth stem wire wire 22 gauge (mine was 45 cms long)
- Piece of card for the template
- A pencil
To start off with, print out the template. I have given you 2 sizes, a larger feather and a smaller
one. I will have all measurements listed for both of them.
Cut a piece of wire 35cms/20cms long long and bend the wire in half, so that one end is 3cms
longer than the other.

3. Take a piece of paper of your choice, and draw a line of glue down the center and place your wire
into the glue, leaving the single piece of wire of 3cms out at the bottom.
Now place your second sheet of paper on top of the first, press it down firmly and leave it to
completely dry.

4. After it is dry, cut out your template and lay it on your sheet with the wire centered and draw
around it ~ now you can cut the feather shape out.
Next cut a fine strip of paper about 5 mm wide and the length of a page, spread some glue on it
and wrap it around the uncovered wire, starting at the top. When you get to the end of the wire,
wrap it around one last time, cut it the excess off and let it dry again.