Steel is the basic material used for every kind of industry, particularly, the engineering industry, Iron ores are melted in a blast furnace, along with limestone and coke and after removal of impurities like sulphur and phosphorous, the molten iron is brought to its basic forms such as Mild Steel ingots, billets and slabs. These are used as raw materials for manufacturing different forms of steel to be used for specific purpose. These end products may be steel structures such as angles, channels or joists of various thicknesses and dimensions or plain rounds or twisted rods of varying diameters. Steel Re-rolling Mills convert billets and ingots to the required structures and sheets.

1. Steel Rolling Mills and Tube Mills

2. Steel is the basic material used for every
kind of industry, in engineering industry Iron
ores are melted in a blast furnace, along with
limestone and coke and after removal of
impurities like sulphur and phosphorous, the
molten iron is brought to its basic forms
such as Mild Steel ingots, billets and slabs.
These are used as raw materials. These end
products may be steel structures such as
angles.
Steel Re-rolling Mills convert billets and ingots to
the required structures and sheets.

3. Plants and equipments for steel re-rolling mills
were earlier imported. But, presently, there are
reputed manufacturers in India that are
designing, manufacturing and installing such
plants on turn-key basis.
For ensuring the quality of the plants and mills,
you need to insist upon certification of ISO 9001:
2000. At the same time, you should look for high
performance without break down and minimum
maintenance.

4. According to your needs, you can get the Steel rolling mills of different
types such as manual, automatic or semiautomatic.
Rolling is a process in which metal is converted to desired forms.
The end products through this process
are rods, strips Rolling processes may
also be classified as ring rolling, roll
bending, roll forming, profile rolling and
controlled rolling.

5. The Reduction Gear Box comes with the provision of
single, double or multi stage reductions, coupled to motor
capacity varying between 100 HP to 2000HP. Gears in
Module and DP system. These gear boxes are featured with
dampen vibration, forced and splash lubrication and amply
rated bearings.
Coilers are used by rolling mills for coiling of TMT and
CTD bars and plain rods that are utilized for drawing of
wire and making fasteners.

6. You can also meet your requirement of Steel melting plants along with the
ancillary equipments such as cooling towers, water softening plants, material
handling equipments, melting furnaces, ingot moulds, bailing presses, induction
furnaces, bottom plates, center column and shreading machines.
Tube Mill plants can also be commissioned along with ancillary equipments like
Strip entry guide, Driven and Idler stand, Welding Roll assembly, HF welder, HR
slitting, guide roller, for making tubes of round size, square or rectangular, with
thickness between 1 to 10mm.

7. Contact Us :
Aman Machine Tools Private Limited
Address : G. T. Road, Mandi
Gobindgarh, Punjab - 147 301(India)
Phone :+91-1765-
255604/500100/257635
Mobile No. :+91- 9876011775
Visit Us: www.amanmachinetools.com