1. S.MANDAL Resume
Page 1 of 6
SUSANTA MANDAL
ABU DHABI, P.O BOX-114409,UAE
Email: susant.mandal@gmail.com; Mob: 0569259607
Linkedin profile : https://ae.linkedin.com/pub/susanta-mandal/30/795/b14
SUMMARY
A Mechanical Engineer with BIM Specialization having 13+ years of experience in AEC
Industry and be able to assist the development of BIM project design, construction and
pre-fabrication drawings using Autodesk Cad/Revit/Fabrication software platform. Fully
efficient in preparing mechanical, plumbing, firefighting layouts, 2D/3D Detailing, Builder
work, shop Drawing, MEP Coordination Drawing, Clash Checking, Spool Drawing,
Material Take off, Bill of Quantity. Assist Design team to calculate Heat Load, Air
Distribution, duct sizing, and pressure loss by Hap software. Having experience in project
management and leadership roles within complex operation and multi-tasking technically
demanding projects.
EDUCATIONAL QUALIFICATIONS
B.Tech in Mechanical Engineering from JRN(Rajasthan University, India)
Diploma in Mechanical Engineering from WBSCTE (State Council, India)
10+2 from WBSCHSE (State Council, India)
10th from WBBSE (State Board, India)
OBJECTIVE
To continuously develop myself as a Mechanical Engineer with an Excellency in BIM
MEP Coordination and make a significant contribution to my organization through my
knowledge, experience, skills and personal commitment for professional satisfaction of
organization and motivating the team through various ways with the help of
management Professional Experience.
2. S.MANDAL Resume
Page 2 of 6
PERSONAL STRENGTHS AND SKILLS
Strong leadership, project management, decision making, problem solving skills.
Heat load calculation, Pressure loss calculation and Duct sizing.
3D modeling of mechanical services layout and Equipment as per manufacture's
catalogue.
Checking routing feasibility of services with existing situation.
Coordinate and monitor all MEP drawings (Mechanical, Electrical, Water, Plumbing,
Drainage, Irrigation and Fire Fighting) with their program schedule for proper flow of
work on site which concerns the structural and architectural services.
Performing clash detection and making report generation using Revit mep and
Navisworks.
Making necessary correction and alteration for 100% clash free.
Materials take off and preparation of detailed Bill of quantities for HVAC and Plumbing
works.
Help material submittals from suppliers with comply satatement.
Prepare the coordination drawing for the above false ceiling electro-mechanical
services such as Cable trays, ducting, diffusers, and lighting fixtures, chilled & fire
water piping.
Adopts a hands-on approach in dealing with installation issues especially when the
concern is focused on space and coordination while ensuring time bound.
Responsible for the coordination with site engineers for installation as per shop
drawings.
Responsible for shop drawing submittals and approvals liaison with Sr. Mechanical
Engineer.
To attain meetings with the consultant and Raising RFI if there is any technical
discrepancies in Design drawing.
To prepare As-Built drawings for the final handing over of the project.
Prepare and maintain design change tracker on due course.
3. S.MANDAL Resume
Page 3 of 6
PROFESSIONAL EXPERIENCE
16/Jan/14 – present Mercury International Electro Mechanical LLC.
BIM MEP Coordinator
Mercury Group is a leading MEP (Mechanical, Electrical and Plumbing) Contractor within
the construction industry with a strong operational presence in all over world. It delivers
an extensive range of engineering services across a multitude of sectors from
management contracting to building services requirements.
Projects Involved:
NBAD Data Centre (Kizad, ABU DHABI, UAE)
Abu Dhabi Islamic Bank Head Quarter (ABU DHABI, UAE)
20/Aug/12 – 30/Nov/13 Infinity Knowledge Venture Pvt. Ltd
BIM/ CAD Operation Manager- Mechanical
Infinity Group Limited has it’s footstep in Building IT Park, Business Centre, Hospital
etc. Infinity played the role of being the catalyst in bringing the IT revolution in West
Bengal, India with over 600 companies operating in Sector V, Salt Lake, and Kolkata.
Apart from domestic project, infinity is in to Design & Construction projects in Middle
East, Australia.
Projects Involved:
Mandeville Garden Residential (Kolkata, India)
Sky city Adelaide Extension (ADELAIDE, AUSTRALIA)
Orange County Sanitation Department (CALIFORNIA, USA)
15/Jun/09 – 10/Jul/12 Hastie Engineering Services Pvt. Ltd
CAD/ BIM Leader- HVAC, Plumbing.
On Site Mep Coordinator
Hastie Group Limited is the leading international designer, installer and maintainer of
technical services – mechanical, electrical, hydraulics and refrigeration sector.
Projects Involved:
4. S.MANDAL Resume
Page 4 of 6
Royal North Shore Hospital and Community Health Services (SYDNEY,
AUSTRALIA)
Darling Walk office building (SYDNEY, AUSTRALIA)
Zayed University (ABU DHABI, UAE)
Arzanah Medical Complex (ABU DHABI, UAE)
29/Oct/10 - 22/Mar/11 Rotary Gulf LLC.
BIM MEP Coordinator
Rotary Gulf was a leading MEP contactor of integrated mechanical and Electrical
building services in Middle East and North America region.
Projects Involved:
Arzanah Medical Complex (ABU DHABI, UAE)
14/Mar/05 – 01/Jun/09 LuminousEngineering&TechnologyServicesPvt.Ltd
Team Leader CAD-HVAC
LETS is a Multidisciplinary Design Engineering & Geomatics Service provider. LETS has
been supporting its customers globally for more than 15 years and is one of the most
cost effective and reliable service provider in the area of design engineering and
Geospatial knowledge processes with presence in three continents.
Projects Involved:
U.S. Air force base office Building, (BAGRAM, AFGANISTAN)
IMEK office building, (SWEDEN)
San Salvador Ancillary Building, (USA)
09/Oct/02 – 09/Mar/05 Thermex-H & K India
Site Engineer
The Thermex System is economically viable for mills with a capacity from 50,000
ton/year to 600,000 ton/year. India will have over 150 Thermex installations by mid
2010. Their total Thermex bar capacity is about 13 million ton/year.
Duties include:
Being the responsible Site Engineer and reporting to the PM.
Continually review the contractor’s construction schedule during the progress of
site works.
5. S.MANDAL Resume
Page 5 of 6
Review Contractor’s shop drawings against the design [tender] drawings for
compliance with the design intent and return to project manager with appropriate
comments / approval.
Prepare on-going list of mechanical services defects for contractor’s remedial
action
Keep all equipment / machineries in safe and checked by competent person.
Material and Manpower Management.
Supervision on Site for Execution of Installing and Commissioning Mechanical
Services.
Coordination with other Services.
Submit work progress report, discuss about delays in job with Project Manager to
accomplish the work within the target date.
Projects Involved:
BALAJI ROLLING MILL, (DURGAPUR, INDIA)
28/Feb/00 – 08/Oct/02 Mechtech & Sumi Construction
Junior Mechanical Engineer
Mechtech & Sumi Construction was established in 1977 in the industrial area of
Kalyani, WB. Offering construction, fabrication and maintenance services, it has become
the growing privately owned fabrication company in India with more than 60 staff and
large modern fabrication workshops in Kalyani. Their ethos is to be an integral part of
their customers' successes by delivering projects (includes fabrication, Errection and
Commissioning) of the highest quality - on time and on budget.
Duties include:
Evaluated all work orders and project plans.
Prepared daily and weekly schedule.
Ensured that all production materials were available and communicated to
procurement department when needed.
Checked all drawings and ensured that all designs were followed and all corrective
measures were taken in case of discrepancies.
Scheduled plant maintenance and prepared a maintenance plan and performed
preventative and corrective maintenance.
Prepared daily production reports, identified all problems and resolved them.
SPECIAL SKILLS & INTERESTS
Extensive experience with:
CAD packages: AutoCAD, Revit MEP, AutoCAD P&ID, FAB MEP (CAD DUCT),
Navisworks Manage.
Carrier HAP 4.0, Elite-R hvac for heat load calculation.
Ductulator for Duct Sizing.
Office suits including MS Office (word, Excel) 2010, MS Project.
Operating systems: Windows 2007, Windows XP
PROJECT BASED UPON STANDRADS
6. S.MANDAL Resume
Page 6 of 6
ASHRAE
BCA (Building Code Of Australia)
IMC (International Mechanical Code)
SMACNA