Santanu Jana is a BIM engineer and Revit modeler with over 3 years of experience working on international projects. He has expertise in Revit Architecture and Structure and uses those programs as well as Navisworks and AutoCAD. Some of the key projects he has worked on include hospitals and mixed-use developments in Qatar, Saudi Arabia, and India. His responsibilities include 3D modeling, coordination, shop drawing creation, quantity takeoffs, and resolving clashes. He aims to take on more responsibilities as a BIM modeler and contribute value through his skills and hard work.

1. BIM ENGINEER, REVIT ARCHITECTURE & STRUCTURE
Name: Santanu Jana, BIM Engineer.
Qualification: Diploma In Civil Engineering.
Mob No: 8116846568
Email ID: santanujana2013@gmail.com
Qualification Summary:
Technical : Diploma in Civil Engineering with 80.5% in 2013 from Contai Polytechnic (Govt.)
General : • Higher Secondary Examination with 64.2% in 2010 from Dhuliapur P.S. Banimandir
• Madhyamik Examination with 87.3% in 2008 from Harinarayan Chak Vidyamandir.
Experience Summary:
• Total Experience: 3 Years and 4 Months.
• Working as a Revit Modeler on International Projects ranging from Residential, Hospital, Commercial
using Revit Structure & Architecture.
• Creates Parametric Revit Family as per project requirement & detailing.
• Working as a BIM Coordinator using Navisworks for clash coordination between Architecture, Structure &
MEP Model.
• Resolves the clashes as per requirements & raises RFI for mismatch of project elements for design review.
• Software platforms:
 Revit Architecture, upto version 2016.
 Revit Structure, upto version 2016.
 AutoCAD, upto version 2016.
 Navisworks, 2016.
 MS Excel, Word, Powerpoint.
Career Objectives:
 Want to take responsibilities as a BIM Modeler and utilize my knowledge & skills in BIM projects. Very
Passionate to put value on job for organization with my skills & hard work.
Work Experience:
 OVERALL 3 YEARS AND 3 MONTHS EXPERIENCES.
 PINNACLE INFOTECH SOLUTIONS, Durgapur, India. (Largest BIM Consultant in India)
Service Duration: September, 2013 - Present
Designation: Executive Engineer.
Project Experience:
 Msheireb Downtown Phase 3, Qatar, 2013
A mixed use project which is currently being constructed. There are 14 buildings of the
Project (R01, R02, R06, R08, S01, S03, S06, S08, T01, T03, T05, T06, T07 & T08) We have
created LOD 400 Models. The total area of this project is 4,00,000 sq m.
 Role & Responsibility:
 Creating LOD-300 & 400 3D Model using Revit Architecture & Structure.
 Creating GA shop drawing.

2.  Creating shop drawing of Ceramic tiles plan & Elevation.
 Creating shop drawing of Block work
 Creating quantity take off (BOQ) from Revit model.
 Coordination between architectural & structural model.
 RFIs creation those mismatching were found during modeling.
 King Abdullah Specialized Children Hospital, KAMC-WR(SCH)Saudi Arabia, August 2015-Present.
Children hospital consists of one medical building and 6 other non-medical buildings. The non-
medical buildings consist of various types of buildings like chiller plant, generator plant, boilers
building & water tank, utility culvert, storm water culvert and mosques building etc. The total
area of project is 1,86,920 Sq. m.
 Role & Responsibility:
 Creating LOD-300 & 400 3D Model using Revit Architecture.
 Creating GA shop drawing.
 Creating shop drawing of partition plan, screed, finish plan & elevation, roof
plan, demarcation plan, toilet plan & elevation.
 Prepare RCP drawing.
 Creating quantity take off (BOQ) from Revit model.
 Coordination between architectural & structural model.
 RFIs creation those mismatching were found during modeling.
 Riyadh Maternity Hospital and Ancillary Building,SHR2(MAH)Saudi Arabia,2015
This Women's hospital consists of one medical building and 7 other non-medical buildings. The
non-medical buildings consist of various types of buildings like chiller plant, generator plant,
boilers building & water tank, utility mosques building etc. The total 12 level consist of this
building .The total area of project is 1,21,050 Sq. m.
 Role & Responsibility:
 Creating LOD-300 & 400 3D Model using Revit.
 Creating shop drawing.
 Coordination between architectural & structural model.
 RFIs creation those mismatching were found during modeling.
 Creating shop drawing partition plan, screed, finish plan & elevation, roof plan,
demarcation plan, toilet plan & elevation using by Revit.
 Creating quantity take off (BOQ) from Revit model.
 NEUROSCIENCE AND TRAUMA CARE CENTER KAMC-WR, Jeddah Site, 2015
A mixed use project which is currently being constructed. It is a 175 bedded hospital. There
are two parts one Podium and two Tower. We have prepared shop drawings like Structure,
Architecture and also created 3d model.
Role & Responsibility:
♦ Preparation of 3D Model using Revit Architecture & Structure.
♦ Coordination the model.
♦ Preparation Of shop drawing like floor plan, ceiling plan, furniture layout plan,
,enlarge plan etc.
♦ RFI Creation and log management.
♦ Toilet shop drawings creation (Briefly described below).
 King Salman Specialized, and Non- Medical Building, Taif, Saudi Arabia
King Salman Specialized Hospital is 10th
floor Medical building which area is 107397 sq.
mt. With 26 non-medical building for hospital staff.
 Role & Responsibility:
♦ Preparation of 3D Model
♦ Shop Drawing in AutoCAD and Revit.
♦ Preparation of RCP drawing.
Personal Details:
Father’s Name : Santanu Jana Marital Status : Single
Date of Birth : 11th
Nov-1992 Religion : Hindu

3. Sex : Male Nationality : INDIAN
Permanent Address :
Vill –Kismat Jagannath Chak, P.O –Maguri Jagannath Chak, P.S-Panskura, Dist.-Purba Medinipur, State-West
Bengal, India. Pin – 721152.
Languages Known:
English, Bengali & Hindi.
Motivation: A positive thinker, challenging job motivates me. I think learning has no limit, so try
to learn new and increase my knowledge. I hate to lose most.
 I hereby declare that the information given above is correct to the best of knowledge.
Date: Signature