1. Sunil Kumar Matwa
Roll No. – 11010367
B-Tech – Mechanical Engineering
Department of Mechanical Engineering
Indian Institute of Technology Guwahati
+91-7896512662
s.matwa@iitg.ernet.in
sunilmatwanwh@gmail.com
www.linkedin.com/in/sunilmatwa
Degree Institute CGPA/% Years
B-Tech Indian Institute of Technology Guwahati 8.43/10.00 2011-2015
Senior Sec. Examination Shiv Jyoti Sr. Sec. School, Kota(Rajasthan) 73.69% 2010
Secondary Examination Prerana Sr. Sec. School Nawalgarh 88.00% 2008
EXPERIENCES
Summer Intern, Hero MotoCorp Ltd. 12th May to 5th July,14
Guide: Mr. Nitin Dhingra, Section Head of Production Engineering Department in Haridwar plant
• I worked on two projects “Solar Water Heater System” and “Solar Air Conditioning System” during internship
period in Hero MotoCorp Ltd.
• The goal was to reduce the cost of washing of bike components by virtue of Component Washing Machine and Air
Conditioning System.
• For cost effectiveness of air-conditioning system, Solar Air Conditioning System is used in which LiBr-H20
absorption refrigeration cycle was preferred because of its cost and high coefficient of performance.
PROJECTS
Electro Hydraulic Forming Ongoing
Guide: Dr. Sachin D. Kore, Associate Prof., Department of Mechanical Engineering IIT Guwahati
• The goal of BTP is to study the theoretical aspects of electrohydraulic forming, calculate Forming Limit Curve
(FLC) and other parameters that defined the enhancement in formability of materials.
• An experiment setup was designed in Creo/Pro 5.0 and fabricated based on design parameters and factors of
safety.
• A FEM model was prepared for electrohydraulic forming using the utility package ABAQUS.
• Experiments were done on Al-5012 and Al-6061 metals for calculating parameters that define the efficiency of
the process and its practical applications in various industries.
Adjustable Rain Shelter for Bicycles Jan-August, 2014
Guide: Dr. Narayan Reddy, Assistant Prof., Department of Mechanical Engineering IIT Guwahati
• A shelter or roof was designed for cyclists which can be adjusted based on the occurrence of rains.
• A design using Antenna deployment mechanism was proposed to make the shelter adjustable
• After going through a series of product development stages the final design was modeled in Creo/Pro 5.0 and the
critical parts were dimensioned based on air drag experiments
Active Radial Magnetic Bearing July-Nov, 2013
Guide: Dr. Karuna Kalita, Assistant Prof., Department of Mechanical Engineering IIT Guwahati
• For an eight pole magnetic bearing with given dimensions the variation of levitation force with current density
has been verified as parabolic in nature using ANSOFT Maxwell 2D software.
• Analyzed flux distribution and magnetic field vector for different values of current densities.
• Also, a CAD model of an eight pole magnetic bearing has been developed in Cero/Pro 5.0.

2. Page 2
RESEARCH INTESREST
• High Strain Rate Behavior of Materials
• Electrohydraulic Forming
• Electromagnetic forming
RELEVANT COURSES
• Solid Mechanics and Design of Machine elements
• Welding Technology and Advanced Welding Process
• Basic Thermodynamics and Applied Thermodynamics
• Manufacturing and Advanced Manufacturing Technology
• Fluid Mechanics and Optimization Methods in Engineering
ACHIEVEMENTS
• Recipient of institute MCM Scholarship given based on Merit for three consecutive years.
• Participated in the 49th Inter IIT Sports Meet 2013 held at IIT Guwahati as a member of
hockey team.
ECHNICAL PROFICIENCY
• Utility Tools: Creo/Pro 5.0, ABAQUS, Solid Edge Drafting, ANSOFT Maxwell.
• Operating System: Microsoft Windows, Linux (Ubuntu).
• Programming language: C/C++.
POSITIONS OF RESPONSIBILITY
Member of Mess Management committee July,2012 to July, 2013
As a member of the mess management committee, I was responsible for deciding the mess menu,
negotiating prices of items in the canteen and juice center and all other general issues related to
them.
City representative ,TECHNOTHLON Nov. 2011 to July 2012
Organized TECHNOTHLON (International School Championship) in my district (Jhunjhunu) in the
year 2012 .It’s a part of Annual Technical festival of IIT Guwahati. I motivated school going
students for Participating in this exam and getting some experience of higher education/research.
EXTRA CURRICULARS
• An active member of our college NCC (National Cadet Corps) team from August 2011 to April
2013.
• Participated in the Spirit (inter college sports meet for colleges in Assam) held at IIT Guwahati
as a member of hockey team.
• A member of Drama team of Hostel in Manthan (inter hostel culture festival) 2011 and secured
2nd position.
• A member of my hostel hockey team which won bronze medal two times in Spardha, which is
the inter hostel sports tournament .
(References available on request)