Wireless Switches is a wireless radio transmitter without being connected with any control circuit or battery, which plays its role by matching with wireless receiver. It can control the receiver, therefore it can remote-control the load (lights, fan, etc.) connected with the receiver. The innovative self-powered technology is used as self-powered wireless switch, which can harvest the energy caused by the finger's pressing to send the radio signal. Therefore, the battery is not required, which can avoid the trouble of changing battery and protect the environment.

1. WIRELESS
SWITCHES
T: +971 4 5149589 | M: +971 55 197 8506 | W: www.sbinaryllc.com | E: admin@sbinaryllc.com
F: +971 4 5149582 | Office 1703, Citadel Tower, Business Bay | PO Box 410680 Dubai, UAE

2. FEATURES
•ENVIRONMENTAL PROTECTION AND ENERGY-SAVING•
Self-powered. No cable connect. No battery. No solar panel inside.
Save time, save cable & labor cost.
•CONVENIENCE•
Easy installation and flexible move by double-side adhesive tape or screws.
No damage to wall , specialized for redecoration and house of timberwork.
•SAFETY AND RELIABILITY•
Fire-resistant, electric-prevention, lighting-protection, No radiation.
Reliable anti-interference function by the encryption codes.
•HIGH PERFORMANCE•
Be workable within 30meters inside house (through 2-3 walls) or 80 meters
outside, no directional limit. More than 200,000 time for press key;
Can endure high an dlow temperature
•MULTIFUNCTION•
Available for single switch to single receiver, single switch to multi-receiver
(maximum 10pcs } ,multi-switch to single receiver, multi-switch to multi-switch .
Tearing walls
Pulling wores
Wired power
Fixed place
Dry places only leakage probability
Unsafe for childred
self-powered
no wirings needed
no batteries required
can be place anywhere
Water resistance
works great in
bathroom, outdoor
wet environment
No leakage
No shock
Safe for childrenKINETIC SWITCH
TRADITIONAL SWITCH

3. SELF POWERED TECHNOLOGY
When users press the button,
energy converting module
inside will change the mechanical
energy into electric energy.
Then the wireless module of the
button sends the signals
to receiver. The receiver receives
the signals and turns
on/off the light.
WHAT’S ON THE INSIDE AND HOW IT WORKS?
TRANSMITTER
RECEIVER
Input: 180-260V 50-60HZ
Output: 180 - 260V 50-60HZ,10A,
1000W Max
Application: Fluorescent lamp,
Incandescent light
HOW TO CONNECT?
1. Long press the learn button or the
black button on the receiver.
2. Press the transmitter or the switch twice
in one minute and then you can see that
they are paired. If not, press the switch
twice again.
HOW TO RESET?
1. Turn on the lights. Press the learn button or the
black button atleast 10seconds.
2. The light will turn off. That means it is
disconnected. Previous connection will not work.

4. WS2 - WS3 RECEIVER
INPUT: 85-265VAC
50/60HZ
OUTPUT:lMAX=5A
x
cAC110V/
AC220V
LIGHT
BLACK BUTTON
OUT
L
N
WORKING VOLTAGE: AC-240V
WORKING FREQUENCY: 433MHz
LOAD: RESISTANCE LOAD < 600W
INDUCTIVE LOAD < 100w
WS1 RECEIVER
Learn Button / On-Off Button
N-in
L-in
L-out N-out
Light
Screw hole
x
Screw hole
WS4 - WS8 RECEIVER
Power Supply AC 180 - 260V (50/60HZ)
Operating Temperature -10°~+50°
Range (Open Field) Outdoor 70M, Indoor 30M
RF Frequency 433MHz
Power Consumption <750mW
Load Power 1000W
Operating Force •
Dimensions 66x41x27mm
Weight 35g
WS4 - WS8 WIRELESS RECEIVER
Power Supply AC220V
Frequency 433MHz
Modulation Method •
Effective Distance 30M Indoor, 80M Outdoor
Load
Resistant load 600W (such as incandescent
lamp, inductive load 100W (such as
Fluorescent or led Lamp）
Max Load 5A
Working Temperature (-10)°c-60°c
Dimension 49x28x25mm
Weight 30g
WS1 WIRELESS RECEIVER
LVR900 LVR910
Power Supply AC220/230V, 50/60HZ 85-265VAC, 50/60HZ
Max Ohm Load 5A 10A
Load of filament
lamp
500W 1000W
LED lamp 100W 200W
Static power
Radio Frequency
Radio Range
Working
temperature
Storing Environment
Enclosure
Weight
Carried Standard
433M HZ
Outdoor 80M, Indoor 30M - can pass through
the wall
WS2 - WS3 WIRELESS RECEIVER
Temperature: -50°~70°, Humidity: 0~75% RH,
no condensation
About 30g
GB706.1-2005 GB16915.3-2000
Fireproof PC
Temperature: -40°~60°, Humidity: 0~75%RH,
no condensation
<1W

5. WS1
WS1-1 WS1-2
WS3
WS3-1 WS3-2 WS3-3
WS2
WS2-1 WS2-2
WS8
magnetic switch
WS6
WS7
round shape switch
*can be use as master switch
WS4 WS5
*can be use as master switch
Power Supply
Press to generate electricit,
no battery or other power
needed
Frequency 433MHz
Modulation Method GFSK
Effective Distance 30M Indoor, 80M Outdoor
Working Temperature
Dimension 80x80x17mm
Weight 76g
WS1 WIRELESS TRANSMITTER
(-10)°c-60°c
Power Supply Self powered
Radio Frequency 433MHz
Radio Range
Outdoor 80M, Indoor 30M - can
pass through the wall
Working temperature
Temperature: 25°c-70°c,
Humidity: 0 - 75% rh, no
condenstation
Storing Environment
Temperature: 20°c-60°c,
Humidity: 0 - 75% rh, no
condenstation
Enclosure Fireproof PC
Weight About 60g
Key Type On/Off, 1key/2keys/3keys
WS2 - WS3 TRANSMITTER
Power Supply Self powered
Operating Temperature -40°~+50°
Range (Open Field) Outdoor 70M, Indoor 30M
RF Frequency 433MHz
Power Consumption •
Load Power •
Operating Force <4N
Dimensions 88x86x21mm
Weight 58g
WS4 - WS8 WIRELESS TRANSMITTER