The bolt tightening inspection report summarizes an inspection of temporary tower supports for a landside bridge at Kuwait International Airport's new passenger terminal. The inspection checked 1,152 bolts, nuts, and washers with a diameter of 24mm on structural member EW08-09. All joints were found to meet specifications and be properly tightened with the correct grade bolts, nuts, and washers. The inspection was 50% complete.

1. MINISTRY OF PUBLIC WORKS
Construction, Completion, Furnishing, and Maintenance for Kuwait International Airport New Passenger Terminal II
SPA/214
BOLT TIGHTENING INSPECTION REPORT
Reference Inspection No:
ITP NO :
Area: Landside Bridge Temporary
Tower Support
Subcontractor: LIMAK 3rd Party Company: ASTRON Report No:
LKW-STR-REP-003848
Level: -6200 & +10935 Aconex Ref No:
LKW-STR-REP-003848
Drawing Ref: LKW-STR-DWG-02-900-XX-4000002. Scope of Work/Description:
Landside Bridge Temporary
Tower Support
Date: 25-04-2022
SI. No Description of Members Qty Diameter in mm Required Torque Grade Visual Remarks
Report No: LKW-QAC-CHL-000019 Page 1 of 1 Rev.02
CONTRACTOR`S REPRESENTATIVE:
Name & Signature:
QC REPRESENTATIVE:
Name & Signature:
3rd PARTY`S REPRESENTATIVE:
Name & Signature:
Date:25-04-2022 Date: 25-04-2022 Date:25-04-2022
01 EW08-09
BOLT: 384
M24 Snug Tightened
A325M 8.8
OK
NUT: 384 ASTM 653M
WASHER: 384 ASTM F436
TOTAL 1152
COMMENTS:
1. All joint checked & found accepted
2. Each joints have
One Bolt
One nut
One Square washer
Note: bolts, nuts, Washer supplied from BHARTI.
50% Of the inspection is Done.