2-in-1 dental impression materials cleaner, disinfectant

1. ecological composition VOCs-
free,alcohol-freeandaldehyde-
free composition universal one
product instead of many dimen-
sional stability with all impres-
sion materials economical thanks
to hyper-concentration active
wide spectrum of efficiency rapid
active with 5 minutes 2 in 1 clean
and disinfect simultaneously
biosanitizer
new ecological concentrate disinfectant cleaner
for moulds

2. dimensional stability
Thanks to its ecological composi-
tion, biosanitizer guaranteed di-
mensional stability of impression
materials (incl. alginates, silicones,
polyether and hydrocolloids) including dur-
ing prolonged soaking.
rapid or economic
Based on the selected priorities; biosanitizer
offers advance levels of dilutions:
It takes only 5 minutes to eliminate bacteria
and viruses. If necessary, by increasing the
soaking time and concentration, the micro-
bial activity can be extended to yeast and tu-
berculosis. Up to 200 liters of ready-to-use
solution can be obtained with the concen-
trated pot of 1000g (0.5% dilution).
ecological
The composition of biosanitizer is VOCs-
free, alcohol-free and aldehyde-free. After
dilution in the soaking-bath the powder re-
leases into natural active oxygen. Due to its
hyper concentration discharges into the en-
vironment are greatly reduced in compari-
son with a conventional product. Therefore,
the solution diluted offers the advantage of
being simply thrown into the flow without
harming the environment.
biosanitizer
new ecological concentrate disinfectant cleaner for moulds
In the same spirit as our eco-friendly
range of disinfectant, biosanitizer M
(M = Moulds) is supplied as a powder
concentrated, based on active oxygen
form, for disinfecting and cleaning of
impression moulds, dentures, prosthetics-
devices and delicate impression-
materials (incl. alginates, silicones, poly-
ether and hydrocolloids).
It avoids risk of distortion of the dimen-
sional stability. A hyper-concentrated for-
mula allows for savings while reducing
environmental impact during the dis-
charge into wastewater. This unique pres-
entation was specifically designed to ena-
ble you to choose the desired contact
time in the Saniswiss soaking-tank.
bactericide activity according to
EN 1040, EN 13727, EN 14561,
MRSA, VRE (0.5% 5 min.).
yeasticide activity according
to EN 1275, EN 13624,
EN 14562 (2% 10 min.),
tuberculocide activity according
to EN 14563 (2% 60 min.)
• Mycobacterium Tuberculosis
virus
• HIV1 (0.5% 5 min.),
• Herpes virus (0,2% 10 min.),
• PRV (0,2% 10 min.),
• HBV (0,2% 10 min.),
• BVDV (0,2% 10 min.),
• HCV (0,2% 10 min.)
composition
powder-based on
monopersulfate compounds,
surfactants, chelating and
acidifying agents. active
oxygen released after dilution
of powder in H2
O.
meets european standards
pot 1000g
code 132033
% biosanitizer H2O efficacy
eco 0.5 5 g 995ml 5 min.
Tbc 2 20 g 980 ml 10 min.
BSBbsm022015EN
1 mix 2½ spoon with H2O
2 soak 5 min.
3 rince carrefuly under H2O
4 dry, wrapp and label
soaking-tray 3000 ml
code 132017
lifetime bath indicator (date)
bath dilution level indicator (1000 - 3000 ml)
1
2
2
1
1
2
3
4
saniswiss sa • chemin des tulipiers 19 • 1208 Genève • Switzerland • t +41 22 718 75 75 • f +41 22 718 75 76 • info@saniswiss.com • saniswiss.com
saniswiss sa is an ISO 13485 certified company. All saniswiss™ products have the CE 1253 mark.
medical device Class IIb