2. XCAL series AutoCall Setting FTP Test
Unit 206, 2/F., No. 8 Science Park West Avenue Page 2
Hong Kong Science Park, Shatin, Couei APAC Ltd
New Territories, Hong Kong www.couei.com
TEL: +852-2210-7004
1 Start AutoCall Scenario Settings
Figure 1.1: AutoCall Scenario Settings window
Alias List
List of created scenarios (Call Scripts)
AutoCall Scenario
Scenarios selected among the Alias list to be used during the current auto call automation session.
Left Click
3. XCAL series AutoCall Setting FTP Test
Unit 206, 2/F., No. 8 Science Park West Avenue Page 3
Hong Kong Science Park, Shatin, Couei APAC Ltd
New Territories, Hong Kong www.couei.com
TEL: +852-2210-7004
2 Make a New FTP Script (Create New Scenario)
Figure 2.1 : AutoCall Setup window for a new call script
(1) Designate FTP Connection Information and Call Timers
Figure 2.2 : Example of designate FTP connection info and call timers
1
2
3
5
4
Left click Left click
click to
select
FTP
Script
window
4. XCAL series AutoCall Setting FTP Test
Unit 206, 2/F., No. 8 Science Park West Avenue Page 4
Hong Kong Science Park, Shatin, Couei APAC Ltd
New Territories, Hong Kong www.couei.com
TEL: +852-2210-7004
① Left click to select FTP Script window
② Type any call script name
③ Designate FTP connection
- Host : 220.241.96.242 (FTP server address)
- Login ID : couei.apac (FTP Login ID)
- Password : ********** (FTP Login Password)
- Change Dir : Download/ (Path where the target file located)
- Tick test type
In case of download
Tick ‘Get File’ and type a file name to be downloaded
In case of upload
Tick ‘Put File’ and select File Size at combo box
④ Designate Call Timers in unit of second
- Idle Time : 5 (seconds, Recommended value)
- Setup Time : 1 (second, It will be ignored)
- T.Setup Time : 30 (seconds, Recommended value)
- Traffic Time : 120 (seconds)
- Call Count : 100
Traffic Time and Call Count can be changed with your test propose.
Please refer to (2) FTP Call Timers Diagram at next page.
⑤ Click OK to save the configuration
3 Call Timer
Idle Time
UE recess interval before start next Call
Setup Time
Timer for establishment of PPP connection (DUN)
T_Setup Time
Timer for logging to a target server (FTP, Ping, HTTP and so forth)
If Timer expires without successful access to the target Call, Traffic Setup Fail will be made in call
result.
5. XCAL series AutoCall Setting FTP Test
Unit 206, 2/F., No. 8 Science Park West Avenue Page 5
Hong Kong Science Park, Shatin, Couei APAC Ltd
New Territories, Hong Kong www.couei.com
TEL: +852-2210-7004
Total Setup Time
Either “Setup time and Traffic Setup Time” or “Total Setup” time can be defined.
Traffic Time
Timer for downloading/uploading a file from/to FTP server or opening target HTTP web site. If Timer
expires without completing downloading/uploading a file from/to FTP server or opening HTTP web site,
Time Out will be made in call result.
In case of Ping Call, it is ignored.
Call Count
How many times Call test are performed
Total Time [ms]
Total time of a call, i.e. the UE will initiate a new call every Total time in ms, whatever call event has
happened within this time interval. This value has to be larger than the sum of Idle Time, Setup Time
and Traffic Time.
4 Designate Dormant & Pending Option
1.Tick ‘Allow Dormant State’
Without it, FTP call will be resulted in Call Drop ,
When Radio Bearer is released temporarily for Resource Management by network
2.Tick ‘Pending’ to monitor User Traffic
- Select Service Layer : PPP or FTP
Designate which user traffic
1
2
6. XCAL series AutoCall Setting FTP Test
Unit 206, 2/F., No. 8 Science Park West Avenue Page 6
Hong Kong Science Park, Shatin, Couei APAC Ltd
New Territories, Hong Kong www.couei.com
TEL: +852-2210-7004
- Start Time
When traffic monitor starts from FTP connected
- Threshold
Minimum Data Throughput allowed to
keep a connection
- Time Out
Timer for Threshold.
It is activated when user traffic throughput is under hreshold and it is reset whenever user traffic
Throughput is over Threshold.
When Timer expired, the connection will be released,and ‘Pending’ will be made in Call Result
to show Poor Data Service Quality.
Please set values as above image showed.With the combination of ‘Allow Dormant’ and ‘Pending’,The
call event of Pending can be used as an actual call drop.
5 Schedule a Call Script
Figure 5.1 : How to schedule a Call Script
① Left click and Drag & Drop Alias List item you want to test.
② Tick ‘All Scenarios’ to get a log file with your call test
Left Click and
Drag & Drop
1
2
3
7. XCAL series AutoCall Setting FTP Test
Unit 206, 2/F., No. 8 Science Park West Avenue Page 7
Hong Kong Science Park, Shatin, Couei APAC Ltd
New Territories, Hong Kong www.couei.com
TEL: +852-2210-7004
③ Click ‘OK’ button to start a call test
6 FTP Call Timers Diagram
Figure 4.2 : FTP Call Timers Diagram