2. Clarity®
PoE
empowering your network
Clarity®
PoE Patch Panels
Clarity PoE provides the cross connect
point for horizontal cabling and 802.3af
compliant power injection for any of the
panel circuits that require IEEE standards
compliant Power over Ethernet.
Empowering your network
The introduction of Ortronics new Clarity®
PoE patch panels marks
the integration of PoE power injection within a cross connect panel
designed with the elevated performance of Clarity5E
.
The IEEE 802.3af standard defines a means of supplying power over an
Ethernet cable to a remote device, eliminating the need for a separate
power supply, outlet, or new electrical wiring. Ortronics Clarity PoE
patch panels allow for power to be injected within the horizontal patch
panel.Thiseliminatestheneedforaseparatemidspanpoweringdevice
or the added expense and concerns of making PoE a requirement of
the Ethernet switch, while providing a cost effective way to deploy
power where it is not easily accessible.
Ortronics Clarity PoE patch panel is ideal for applications such as
VoIP, deployment of wireless APs, security cameras, and many other
devices that can now be integrated into the LAN. The panel supports
the maximum allowed 15.4 watts per port, with 802.3af compliant
polling, which confirms that connected devices are compatible before
introducing PoE power to the channel.
Clarity PoE patch panels are available in two different versions to
suit the needs of any installation. For easier ordering, it is available
as a completely self-contained design that includes a 16 port panel,
PoE controller and power supply. A modular design is also available,
which allows the cross connect and powering functions to be installed
in stages. The 16 port cross connect panel can be installed first,
terminating to the horizontal cabling. The controller and power supply
can then be added at a future date when power is required. This can
significantly reduce the cost of the initial phase of the installation,
postponing the cost of the power until it is required at some future
date.
Clarity PoE patch panels exceed all TIA Category 5e component
requirements and are precision targeted to the Clarity5E
patch cords for
optimum performance that is field measurable in the channel. These
panels use dual reactance technology with center tuning to enhance
signal-to-noise performance, providing a nearly transparent signal
path. Clarity PoE panels include standard Clarity features such as easy-
to-read color code labels and improvements to the IDC contacts and
housings that make lacing easier for quicker termination. All panels
are labeled for T568B wiring but can be easily converted to T568A
with a simple change of a supplied label, making this a truly universal
panel solution.
The power supply is designed to snap-mount on either the left or right side of the panel with
the continued ability to reposition after installation, even when the panel is active, ensuring
easy access to all horizontal cable terminations.
Power Supply
Output Cable
Horizontal Connect Panel
PoE Controller
2 www.ortronics.eu
3. Ordering Information
Part No. Description
Rack
Units
Mod/110
wiring
OR-PP5ECMS16 Clarity5E
16 port PoE powered panel,
260 watt, 1.75"x 19" x 10.5"
1 T568A/B
OR-PP5EUPF16 Clarity5E
16 port PoE panel, without
power or controller, 1.75" x 19"
1 T568A/B
OR-PPS2601U Power supply, 260 watt, with output
cable, for use with OR-PP5EUPF16
OR-CMS161U Control module for 16 port PoE,
for use with OR-PP5EUPF16
Features
›
Compliant with IEEE 802.3af power specifications
›
LED indicators on front of panel easily identify the real time status
of each port
›
Serial port provides installer detailed information and control of each
port
›
Order as a single unit that includes 16 port panel, PoE controller and
power supply or as separate components for a staged deployment
›
Clarity PoE panels only occupy 1 rack space
›
260 watt power supply supports IEEE 802.3af maximum of 15.4 watts
per channel measured at the IDC
›
Utilizes standard 110 termination
›
Meets TIA/EIA-568-B.2 Category 5e component specifications
›
Center tuned Clarity technology for elevated performance
›
More transparent signal path when used with Clarity cords
›
Supplied label fields and icon compatible
Real Time Monitoring Capabilities
›
The center LED labeled POWER ENABLED lights up to indicate that
the controller has input power applied and is operational.
›
The bi-color LEDs that are labeled 1 through 16 indicate the status
of their respective port, as follows:
LED = OFF indicates no power is delivered to the port
LED = ON GREEN indicates power is delivered to the port
LED = ON RED indicates fault of any kind on the port
›
The serial port on the PoE Controller allows the installer to view the
status of any of the ports on the controller or to set any of a number of
parameters to customize the panel to the requirements of a specific
installation. This interface and software is meant to be used as part of
the installation/service process, and not for runtime management.
Specifications
The power supply accepts an input voltage of 100-240VAC, 47-63Hz,
and provides two outputs:
+48VDC@5.3A and +5VDC@1A. Both outputs are isolated from the
earth ground/chassis connections in accordance with IEEE 802.3af,
withstanding a hi-pot test of 1500Vrms for 60 seconds.
The PoE Controller receives the isolated +48VDC and +5VDC voltages
from the power supply and provides IEEE 802.3af compliant PoE
functionality to all 16 ports on the panel. Additional circuitry in the
modules isolates the modular connector side (equipment/switch) from
the PoE voltages.
Materials
›
Panel: .094 aluminum, durable black powder coat finish
›
Module: high impact plastic housing
›
Flame retardant UL®
94V-0
›
Fully encased protected circuitry
›
Modular contacts: beryllium copper with nickel under plating and
min. 50 micro-inches of gold in contact area
›
IDC contacts: phosphor bronze, nickel under plating and tin lead
over plate
›
Accepts 22-24 AWG
›
Compatible with 110 impact tool
Environmental Specifications
The Clarity PoE patch panel is rated to operate in a typical cable closet
environment, as follows:
›
Working temperature: 0 - 40º C (32 - 104º F) at full load
0 - 50º C (32 - 122º F) at 80% load
›
Working humidity: 20 - 90% RH, non-condensing
Performance
›
Complies with the UL 60950 safety standard
›
Complies with FCC CFR 47 part 15 emissions standard
›
Modular jack interface meets FCC part 68 subpart F
›
Meets TIA Category 5e component requirements
TIA/EIA-568-B.2 (excluding DC continuity)
Related Products
›
TJ5E series of Clarity®
Category 5e TracJacks
›
MC5E series of Clarity Category 5e patch cords
›
Ortronics Wireless Solution (Wi-Jack™ access points)
›
Mighty Mo®
6 cable management system
3
www.ortronics.eu
4. www.ortronics.eu
Legrand SNC, 128, av de-Lattre-de-Tassigny 87045 Limoges. SNC au capital de 6 200 000 Euros
RCS Limoges B389 290 586 SIRET 389 290 586 00012 – Code APE 516 J Nº identification TVA FR 15 389 290 586
ORTRONICS EMEA
128 Av. Mal De Lattre De Tassigny
87045 Limoges Cedex - France
Tel : +33 (0) 5 55 06 84 67
Fax : +33 (0) 5 55 06 74 48
ORTRONICS FRANCE
82 rue Robespierre
93170 Bagnolet - France
Tel : +33 (0) 1 49 72 52 45
Fax : +33 (0) 1 49 72 52 83
ORTRONICS ITALY
Commercial Division Of Bticino S.p.a
5th Floor - Via Messina, 38
20154 Milano - Italy
Tel : +39 023 480 429
Fax : +39 023 480 422
Via Piramide Cestia, 1b
00153 Roma - Italy
Tel : +39 06 57 56 613
Fax : + 39 0332 42 30 77
ORTRONICS SPAIN
Parque Empresarial San Fernando
Avda. De Castilla, n°2
Edificio Canad á - Esc. A - 1a Planta
28830 - San Fernando de Henares
Madrid - Spain
Tel : +34 91 676 69 77
Fax : +34 91 677 94 66
Torres Cerdá
General Almirante, 4, 4a PL, Of. C
08014 Barcelona - Spain
Tel : +34 93 298 15 88
Fax : +34 93 298 15 89
ORTRONICS UK EIRE
Great King Street North
Birmingham, B 19 2LF - UK
Tel : +44 (0) 121 515 0669
Fax : +44 (0) 121 515 0667
ORTRONICS RUSSIA
9/ 12, M. Simenovskaya Street
Moscow - 107023 Russia
Tel : +7 (495) 660 75 56
Fax : +7 (496) 660 75 51
ORTRONICS GULF REGION
LOB 15
Office 601, Jebel Ali Free Zone
P.O. Box 61415, DubaI - U.A.E
Tel : +971 4 881 6178
Fax : +971 4 881 8145
ORTRONICS KSA BAHRAIN
Al-Khobar Mall, 2nd Floor
Office 362
P.O. Box 927, Al-Khobar 31952 - KSA
Tel : +966 3 887 8950
Fax : +966 3 887 8952
ORTRONICS POLAND
Legrand Polska Sp. Zo.o.
al. Wyscigowa 8
02-681 Warszawa - Pologne
Tel : +(48) 22 549 2301
Fax : +(48) 22 843 9451
ORTRONICS CZECH REPUBLIC
Legrand s.r.o.
Meteor Centre Office Park
Sokolovskà 100/94
186 00 Praha 8
République Tchèque
Tel : + (420) 724 773 158
Fax : + (420) 246 007 669
ORTRONICS TURKEY
Legrand Turkey
Evliya Celebi Mah.
Sadi Korunalp Cad. No 1
34430 Ssishane - Istanbul Turkey
Tel : + 212 251 3430
Fax : + 212 251 5295
ORTRONICS ROMANIA
Str Aromei 96 - Sector 2
023786 Bucuresti - Roumanie
Tel : +(40) 21 243 0937
Fax : + (40) 21 243 0775
ORTRONICS CROATIA
Legrand Zavrtnica 17
10 000 Zaghreb - Croatie
Tel : + 385 160 643 50
Fax : + 385 160 643 59
OR
08
015
EU