Constantly getting bugged by the lost signal? Then here’s a guide to help you identify and solve the problems with your ethernet cables. Read More: https://www.sfcable.com/blog/how-check-solve-ethernet-cable-problems

1. How to Check & Solve
Ethernet Cable Problems
E​thernet cables are one of the most important elements of any
electric system. If they don’t work properly, the rest of the
network would become nonfunctioning. Any type of disruption
would make faulty Ethernet Cable’s performance slow.
Today we will be checking out some of the signs that indicate if
your cable is performing up to the standard or not.
It Often Loses Connection
If you plug the cable into the Ethernet adapter and the light
doesn't turn on, it could indicate a problem either with the cable
or the adapter. Also, if you are seeing display messages like
‘network connection is lost’ or ‘no connection’, then something’s
wrong with the system’s ethernet cable. In such cases, make sure
1​ ​

2. that you’ve connected the cable properly. Otherwise, a bad cable
will not work even if properly connected.
You Always Have Slow Connection
If your connection keeps dropping or runs very slowly, there are
chances that you have a damaged cable. If there is a tear on your
cable, it can break down the internal wire connection and can
cause a short circuit. If you find a bent cable, try straightening it
with your hands. In case it is too beat up, you will need to replace
it.
2​

3. Connection Restored With A Wiggle
Wiggling the cable re-establishes a failed connection. If you do this
too often, it also means that you have a broken connector on your
hands. ​Ethernet cables have a built-in plastic lever that secures
the cable into place within the Ethernet adapter port. If this lever
breaks, the connection will drop.
Do You Keep Replacing Them?
This is the ultimate sign that you need to check your network
ecosystem. If replacing the ethernet cable eliminates the problem,
then it’s well and good. But if the same problem persists with the
new cable, the problem relates to the network. There could be
some malfunction happening.
In such cases, there are three types of ​network cable issues you
should look for:
3​

4. Testing Connectivity Issues
These issues are majorly because of a faulty cable. Consider taking
a quick test to check the connectivity. To check, try plugging the
suspected cable into the network device or network connector of
another computer. Typically, the jack you plug the cable into is the
part of a network adapter. It provides the interface between a
computer/ network device and the network cable.
These adapters have one or two LED lights which state that an
established connection exists and transmission is happening on
the line. After you plug the cable into the network adapter, the link
LED should be on to indicate a connection. If it doesn't light up or
flash, there might be a problem with the cable or its connector, or
both of them.
Testing Performance Issues
If your connection is failing or transmitting data at much slower
speeds, you have performance-related issues. This happens
generally due to a damaged or bent cable. Usually, you can
straighten a bent cable to solve the problem. And if the problem
persists, you might have to replace the damaged cable.
4​

5.
To troubleshoot, visually scan the length of the cable and look for
sharp bends, kinks, or other physical faults in the cable. If you find
a sharp bend or kink in the cable, straighten the cable and check if
the problem is solved.
Before replacing it make sure to shake the cable lightly at the
connector side to see if the connection can be re-established. If
so, then the problem is with the connector. Which also means that
you need to repair or replace the entire cable.
Testing Continuity Issues
If there are any faulty connectors, bends in a cable, continuity
issues can occur. They can also occur by a cut or a sliced cable,
any kind of penetration by objects like a nail, staple, screw, etc. or
electromagnetic interference. If you can visually scan the cable
length, check for any of these causes. If not, test it with a
continuity tester. An electronic device is specially made for this
purpose. Such a device can help detect problems caused by EMI,
or radio frequency interference.
5​

6. Still Got Problems?
Even after doing all this if your network keeps failing, it is very
likely that issues are with local network configuration, one or more
of the network connectivity devices. Like adapters, switches,
routers, and so on. Such faults will require a higher level of
troubleshooting.
If you are looking to buy new ethernet cables, you can navigate to
our ethernet networking cables page from here. From Cat 5E
cable, ​Cat6A cable to Cat 8 cable, we have all the cables to fulfill
your requirements.
6​

7. Constantly getting bugged by the lost signal? Then here’s a guide
to help you identify and solve the problems with your ethernet
cables.
Article Source:
https://www.sfcable.com/blog/how-check-solve-ethernet-cable-pr
oblems/
If you found these article useful, here are some other articles
that may be of interest.
The A, B, and Cs of Ethernet Cables: An Infographic
How Strong Your Ethernet Cables Should be?
Cat 7 vs Cat 8 Cables: What's the Difference?
Why Ethernet Cables are here to stay?
Cat6 Ethernet Cables Ideal For Any Household
8 Ingenious Hacks to Hide Every Cable in Your Room
7​