2. Fiber Laser Marking Applications
All Direct Part Marking
• All Metals
• Carbon Steel
• Stainless Steel
• Aluminum
• Titanium
• Nickle
• Etc.
• Plastics
• Spray is not required on
surface of material.
Great For Engraving Metals
www.selasersolutions.com
3. Fiber Laser Marking Carbon Steel
www.selasersolutions.com
Engrave – Vaporization of base
material sufficient to produce
depth from 0.001” to 0.020” or
deeper.
Burn Mark – High speed
mark that produces good
contrast with some burn
into material.
Annealed Mark – Draws carbon
to the surface creating a black
contrast with a smooth surface
finish. No penetration into
material.
THREE TYPES OF MARKS
4. Fiber Laser Marking Stainless Steel
www.selasersolutions.com
Annealed Mark – Draws carbon to the
surface creating a black contrast with
a smooth surface finish. No
penetration into material.
Burn Mark – High speed
mark that produces good
contrast with some burn into
material.
Engrave – Vaporization of
base material sufficient to
produce depth from 0.001” to
0.020” or deeper.
THREE TYPES OF MARKS
5. Fiber Laser Marking Aluminum
www.selasersolutions.com
THREE TYPES OF MARKS
• Burn Mark – High speed mark that produces
good contrast with some burn into material.
• Frosted/White Mark – High speed mark that
produces a frosted or white contrast.
• Engrave – Vaporization of base material
sufficient to produce depth from 0.001” to
0.020” or deeper.