2. 2
Plastic Products Licensing Procedure
The Plastic Products Licensing procedure based on the Ministerial Order No. 11 of 2019 with
respect to the promulgation of the Technical Regulation of Plastic Products is explained as
follows:
· An application must be submitted by the Company / Organization to the Environmental Licensing
Section, at Supreme Council for Environment (SCE) with all the required documents as stated in the
Plastic Products Application Form.
· ISO 14001 certifications are mandatory requirements by August 2020. Copy of the ISO certificate must
be attached with the application form.
· The plastic product must be tested by an accredited laboratory as per the regulation.
· The Plastic Product License is valid for one year.
· SCE will issue serial number for each product.
· The conformity marking must be affixed on the product and the product serial number must be printed
with the marking.
· The mark printing resolution must be clear, readable and in proportion to standard version as mentioned
in Appendix 2.
Plastic Product License flow chart
ApplicantSCE
Key:
- WMS: Waste Management Section
- PPAF: Plastic Product Application Form
- ELS: Environmental Licensing Section
- SCE: Supreme Council for Environment
- T&C: Terms and Conditions
- DI: Documents and/or Information
3. 3
Plastic Products Application Form
2
PLASTIC PRODUCTS APPLICATION FORM
Application type
[ ] New [ ] Renewal
[ ] General Permission [ ] Licensing Items [ ] Both
Applicant Details
Company name:
Address Building: Road: Block: Area:
CR. No:
Contact person: Position:
Fax: Tel.: Mobile:
Email:
Product General Details
Product
Description
HS Code Raw Material of Product Type & (%)
Polymer
Prodegradant
Additive
Other Additives
Type % Type % Type %
Required Documents
For Applicant registration:
[ ] Copy CR certificate.
[ ] Copy of Industrial license where applicable.
[ ] Annual Production Report (Degradable & Non-Degradable Materials) where applicable.
[ ] Process flow diagram.
[ ] Copy of ISO 14001 certificate (Mandatory by August 2020)
For products license:
[ ] Declaration of Conformity
[ ] Test reports indicating product compliance issued by accredited laboratories.
[ ] Design Drawing indicating the position of conformity marking.
I hereby certify that all the information mentioned in this form is CORRECT and all attached documents
are AUTHENTIC and I am authorized by the company/ organization to submit this application.
Name: Position:
Date: Signature / Stamp:
4. 4
للتحلل القابل البالستيك بطاقة باستعمال ترخيص
License to use of the degradable Plastic Marking
License No.: BH/----/---/---/--- :الترخيص رقم
Supreme Council for Environment grants: :للبيئية األعلى المجلس يمنح
Manufacturer /
Importer name:
:المورد أو المصنع اسم
Address: :العنوان
The approval to use degradable plastic
marking for:
على للتحلل القابل البالستيك بطاقة باستعمال الموافقة
:التالية المنتجات
After fulfilling the required requirements
according to the normative documents
:التالية القياسية المراجع وفق الالزمة للمتطلبات استيفائها بعد
Date of issue: :المنح تاريخ
Date of expiry: :االنتهاء تاريخ
البيئية التراخيص قسم
Environmental Licensing Section
أو تعليمات وأي البحرين مملكة في العالقة ذات واللوائح لألنظمة سريانه مدة خالل الترخيص هذا يخضع
.للبيئة األعلى المجلس يصدرها تعديالت
The License – during its validity - is subject to of the relevant regulations in the Kingdom
of Bahrain and any instructions or amendments issued by the Supreme Council for the
Environment.
5. 5
Declaration of Undertaking by
Degradable Plastic Manufacturer
Applying for Certificate of Conformity from Supreme Council for Environment
A- Applicant Details
Applicant’s name:
Address:
Contact Person:
E-mail Address:
Phone Number:
B- Product Details
Brand Name / Product Description
C- Declaration
I, the undersigned hereby undertake to comply with all the obligations referred to in the
Ministerial Resolution No. 11 of 2019 following the licensing process for marketing the above
product in the local market, and to fulfill the remaining requirements for licensing during the
period specified by the Supreme Council for Environment (for non-fulfilled companies only)
Company Name:
Authorized Person:
Signature:
Date:
Company Stamp
6. 6
Appendix 1:
Regulated products
Plastic products HS Code Effective from
Single use plastic bags, for example: Shopping bags, garbage bags and
laundry plastic bags ..etc.
39232110
39232190
39232910
39232990
25 July 2019
Polyethylene and Polyprolelyene sheets on rolls such as table covers. 39201000
39202000
39204910
25 July 2020
Other Plastic products included in the Ministerial Order No. 11 of 2019
with respect to the promulgation of the Technical Regulation of Plastic
Products.
- To be
Announced
later.
7. 7
Appendix 2:
Standard Plastic Conformity Marking
Standard Marking
)Serial Number(
The Marking available in four standard colors (White, Green, Red and Black)
Appendix 3:
Plastic Conformity Marking Dimensions
Standard Dimensions
W=30 mm×H=35 mm
8. 8
Appendix 4:
Plastic Conformity Marking Colors
Color (A) Color (B) Color (C) Color (D)
Intended for
Colored Plastic
Intended for
Green Plastic
Intended for
White Color Plastic
Intended for
Black Color Plastic
Green Red Black White
R: 28 R: 225 R: 1 R: 225
G: 92 G: 29 G: 2 G: 225
B: 48 B: 37 B: 3 B: 225
Appendix 5:
Permissible Limits for Heavy Metals
Element
Maximum Acceptable
Limit (mg/kg)
Element
Maximum Acceptable
Limit (mg/kg)
Zn 150 Cr 50
Cu 50 Mo 1
Ni 25 Se 0.75
Cd 0.5 As 5
Pd 50 F 100
Hg 0.5 Co 38
9. 9
Appendix 6:
The package labeling of the plastic, must include the following information:
- Type of plastic material
- Name of the manufacturer and / or the trademark
- Country of origin
- Date of production
- Purpose of usage
- The shelf life period
- Storage conditions
10. Supreme Council for Environment
Tel. 17386999 - 80001112
e-mail. info@sce.gov.bh
Website. www.sce.gov.bh
P.O.Box. 18233 Manama, Kingdom of Bahrain
Instagram. sce.bh
YouTube. sce bh