Snap Tester is used to determine the holding or breaking strength of prong-ring attached snap fasteners onto garments.

1. To determine the holding or breaking strength of prong-ring attached snap fasteners onto garments.
Consists of an Upper Snap Clamp, a Lower Fabric Clamp & Force Gauge mounted on a Stand. The snap
component is gripped by the Upper Snap Clamp and the garment is fixed to the lower Fabric Clamp. By
turning the Top Flywheel, the operator can apply a specific force and the holding force or the breaking
strength can be recorded. Capability can be enhanced with clamps & accessories for testing of other
Snaps, Jean Buttons, Four Hole Buttons & Garments Accessories such as Zippers, Bows, Applique,
Toggles, Hooks/Bars, and D-Rings, among others.
The detachment of a snap or other part may be classed as small parts; whilst broken small parts may
require sharp point & sharp edge testing. As a result, additional testing equipment may be recommended,
such as:
Small Parts Cylinder (G201A9-10)
Sharp Point Tester (G201A1-3)
Sharp Edge Tester (G201A4-6)
Button Impact Tester (M289)
Snap Button Tester
Snap Tester Testing Standards:
ASTM D7142-2/F963, CFR 1500, EN 71
PART 1, GB 6675, ISO 8124, M&S P115A
Applications:
Snap Tester is used to determine the holding
or breaking strength of prong-ring attached
snap fasteners onto garments.
Product Information:
The Snap Tester consists of an Upper Snap
Clamp, a Lower Fabric Clamp & Force
Gauge mounted on a stand. The snap
component is gripped by the Upper Snap
Clamp and the garment is fixed to the lower
Fabric Clamp. By turning the Top Flywheel,
the operator can apply a specific force and
the holding force or the breaking strength
can be recorded.
Read more on http://www.qinsun-lab.com/Products/snap-tester.html