Zercon is Indias leading LED lighting companies manufactured in India. This is a joint venture between Sh. R.P. Khaitan (Jt. Managing Director Nippo Batteries Company Limited ). and Sh. Saleem Shervani, (MD of Shervani Industrial Syndicate Ltd and also a former Union Cabinet Minister.)
3. VISION
•To be a one stop solution for all LED Luminaries which are cost competitive, matching with the best in quality and after sales service.
4. MISSION
•To contribute to the society by providing cost effective, energy efficient and environment friendly LED lighting products.
5. Benefits of LED lights?
Feature
Benefit
Energy efficient
Saves 60% to75% in power consumption.
Long lasting
Life more than 50,000 hours (typically >10 years)
High power factor
Power factor > 0.90
Maintenance free
No replacements of lamps and ballasts
Instant start
Flicker free, within nanoseconds
Environment friendly
No mercury, lead or heavy metals. No issues of safe disposal of toxins
Dimmable
Lighting intensity can be controlled as per requirement
Amenable to solar
power
Low wattage results in lower cost of solar solution
Natural light
Closest to daylight spectrum, clarity in image capture for CCTV,and true colour rendition
No infrared and
ultraviolet spectrum
Does not attract insects
Unidirectional light
Higher usable lumens. No light pollution,friendly to dark skies
Green technology
Potential for earning carbon credit
6. The LED directional advantage
•Conventional lighting is omni-directional-Lower “usable lumens”
•LED Light is unidirectional-Higher “usable lumens”view angle
LED
Conventional Lighting
Reflector
7. Light Source
FTL
MHL
Sodium
CFL
LED
Lumens per watt at source
60-104
70-80
65-105
50-70
100-130
Lumens per watt at application
45-65
45-50
45-65
40-45
85-110
Correlated Colour Temperature (Kelvin)
2700- 6500
4000- 6500
1800- 2500
2700- 6500
2700- 6500
Rated life at 50% depreciation in lumens (in hours)
10000
8000
15000
10000
>50000
Health and Environment friendly
Mercury
Heavy Metals
Heavy Metals
Mercury
No Toxins
Potential for Carbon Credits
No
No
No
Yes
High
Technological Comparison
8. Lighting for Corporate & Offices
Lighting systems for the “corporate and offices” should meet the following criteria:
•Adequate illumination.
•Uniform distribution pattern.
•Glare-free for comfort .
•High color rendition and closest to daylight spectrum.
•Energy efficient.
•Maintenance free.
•Environment friendly with no toxic disposal issues.
•Elegant and aesthetically appealing.
9. High Usage areas where lighting is used for maximum hours
•Reception
•Senior Executive
•Staff/Small Office
•Workstation Space
•Conference Rooms
•Utility Space
•Lunch/Break Room
•Wash room
10. Reception Area
•Lighting Requirement:
•The lighting levels for reception area should be adequate and match withinterior. The lights should have high CRI for the posters to be displayed in true colors.
•Recommended Illumination: 150-200 Luxfor general illumination
•Color: Neutral White /Warmwhite
11. LED Lights for Reception Area
LED 2x2
Product Code
Output power
Replacement of
ML –CL32
32W
2X36WCFL
LED DOWNLIGHT
Product Code
Output power
Replacement of
ML-DL16
16
2X16W CFL
Potential for energy saving: up to 60%
12. Waiting Area
Lighting Requirement:
•The lighting levels for waiting area should be pleasant.
•Recommended Illumination: 100-150 Lux.
•Recommended Colour: warm white
13. LED Lights for Waiting Area
LED 2x2
Product Code
Output power
Replacement of
ML –CL32
32W
2X36WCFL
LED DOWNLIGHT
Product Code
Output power
Replacement of
ML-DL16
16
2X16W CFL
Potential for energy saving: up to 60%
14. Senior Executive
Lighting Requirement:
•The lighting levels should be fairly good for reading/writing.
•Recommended Illumination: 250-275 Lux.
•Recommended Colour: Cool White.
15. LED Lights for Senior Executive CabinPotential for energy saving: up to 70%
Product Code
Output power
Replacement of
ML-DL16
16
2X16W CFL
LED Down Light
Product Code
Output power
Replacement of
ML-CL32
32W
2X36WCFL
LED 2x2 Fitting
16. Staff/Small Office
Lighting Requirement:
•The lighting levels for these area should be adequate, uniform and glare-free. The lights should have high CRI for replication of true colours.
•Recommended Illumination : 250-300 Lux.
•Recommended Colour: Cool White
17. LED Lights for Staff/ Small Office
LED 2x2 Fitting
Product Code
Output power
Replacement of
ML-CL32
32W
2X36WCFL
LED Tube Light
Product Code
Output power
Replacement of
ML-TL16
16W
40WFTL
Potential for energy saving: up to 60%
18. Workstation space
Lighting Requirement:
•The lighting levels should be fairly good and strain free..
•Recommended Illumination: 250-275 Lux.
•Recommended Color: Cool White.
19. Potential for energy saving: up to 70%
Product Code
Output power
Replacement of
ML-CL32
32W
2X36WCFL
LED 2x2 Fitting
21. LED Lights for Conference roomPotential for energy saving: up to 70%
Product Code
Output power
Replacement of
ML-DL16
16
2X16W CFL
LED Down Light
Product Code
Output power
Replacement of
ML-CL32
32W
2X36WCFL
LED 2x2 Fitting
22. Utility Area
Lighting Requirement:
•The lighting levels should be fairly good.
•Recommended Illumination: 150-175 Lux.
•Recommended Colour: Cool White.
23. LED Lights for Utility AreaPotential for energy saving: up to 70%
Product Code
Output power
Replacement of
ML-DL16
16
2X16W CFL
LED Down Light
Product Code
Output power
Replacement of
ML-CL32
32W
2X36WCFL
LED 2x2 Fitting
25. LED Lights for Lunch/ Break RoomLED 2x2 Fitting
Product Code
Output power
Replacement of
ML-CL32
32W
2X36WCFL
LED Tube Light
Product Code
Output power
Replacement of
ML-TL16
16W
40WFTL
Potential for energy saving: up to 60%
26. Washroom
Lighting Requirement:
•The lighting levels for washroom area should be fairly good.
•Recommended Illumination: 75-100 Lux.
•Recommended Color: warm white.
27. LED Lights for WashroomPotential for energy saving: up to 70%
Product Code
Output power
Replacement of
ML-DL16
16
2X16W CFL
LED Down Light
Product Code
Output power
Replacement of
ML-CL32
32W
2X36WCFL
LED 2x2 Fitting
28. Street and Façade Light
Lighting Requirement:
•Lighting with moderate luxlevels is required so that people can see the surrounding and Façade or hording can be seen from a distance clearly.
•Recommended Illumination: 12-14 Luxfor street light and around 400 Luxat billboard.
•Recommended Color: White.
29. LED Lights for PeripheryLED Street LightPole mounted, IP65 light in Pressure Die Cast housing and tilt able mounting arrangement.
Product Code
Output power
Replacement of
ML-SL90
90W
250W HPSV
Potential for energy saving: up to 65%
LED Focus Light
IP65 light with extruded aluminum modules
Product Code
Output power
Replacement of
ML-FL90
90W
250W HPSV
33. How to select LED Lights?
Technical Competence of Supplier should be evaluated on below criteria
•In-house design, development and manufacturing capability of critical elements:
Electronic Drivers
Light Engine
•Test certificates of polar candela distribution as per LM79 standard.
•Capability to provide application specific LED lights.
•Ability to provide lighting plans for all applications.
•Ability to support warranty on products.
•Capability to provide after sales service across the country.
34. How to select LED Lights?
Technical features and standards of Products that should be looked at.
•LED lights should meet International Standards.
•LED lights should meet safety standards of EN 60598, EMC/EMI as per EN 61547/EN 55015, and EN 61000-3-2 and 61000-3-3 for Harmonics.
•LEDs should be sourced from world’s best producers:
Cree
Lumiled
•LEDs should be bin-selected for color temperature and lumens-per- watt.
•LEDs should be mounted on metal core PCBs.
35. How to select LED Lights?
Essential Infrastructure for manufacturing
•Dust free air conditioned environment for assembly of LED modules and PCBs
•Automatic Pick and Place machine for placement of LEDs and electronic components in drivers.
•Product Design capability on CAD platforms.
37. •“State of the art” manufacturing machinesMitva–Manufacturing Plant
38. Our Services to customers
We offer the complete lighting solution –
1.Study the lighting requirement.
2.Make the lighting plan for required Luxlevel.
3.Calculate the total required light quantity.
4.Provide the mounting and installation support.
5.After warranty AMC support.
6.Customized lighting solution.
40. Power saving and Payback calculation for with LED lights
Sr. #
Parameters
Street Light
2x2 Fixture
Downlight
MR -16
CFL
FTL T8
High mast
LED
HPSV
LED
PL
LED
CFL
LED
HALO- GEN
LED
CFL
LED
T8
LED
HPSV
1
Lamp Power Consumption -O/P power (W)
50
150
33
72
14
36
4
35
4
11
16
36
160
400
2
Power consumption including Electronics/ Ballast/ Control Gear -I/P (W)
5
30
3
8
2
4
1
35
1
11
2
4
20
50
3
Total wattage (W) -I/P + O/P
55
180
36
80
16
40
5
70
5
22
18
40
180
450
Maintenance part –Rs.
12
Maint . Cost per year (Lamp, Ballast, Choke, Manpower etc.) Rs. Per fixture
nil
350
nil
250
nil
100
nil
100
nil
100
nil
100
nil
500
ROI CALCULATION –Yr.
17
Return on investment in (ROI) -Years
1.13
2.18
1.54
0.24
0.69
1.87
2.77
41. Other tangibles worth considering
•Lower load requirement on power back up:
Lower by 55%
•Reduction in load on air-conditioning plant: Lower by 10%
42. We Solicit from you..
•contact us for any type of lighting need
•we will visit your work place, discuss with you your need
•we will do detailed study of your lighting need
•submit proposal giving our solution to your lighting need
•will work as your partner to give you 100% satisfaction for lighting need.