A dish antenna, also known simply as a dish, is common in microwave systems. Coaxial cable is commonly used by cable operators, telephone companies, and internet providers around the world to convey data, video, and voice communications.Tap has a pass through port and higher loss for drop connections.

1. U n i s o l C o m m u n i c a t i o n s P v t . L t d . ,
CATV PRODUCTS

2. About CATV Products
UNISOL CATV (originally "community antenna television,") is more commonly known as "cable
TV." cable TV is an increasingly popular way to interact with the World Wide Web and other new
forms of multimedia information and entertainment services. UNISOL has played major role in
Designing of CATV RF Head ends in major cities in south India & also played a major role in
distribution of CATV RF signals through coaxial cables using VHF RF amplifiers. As Technology
upgraded we played important role in developing hybrid-fiber-coax (HFC) networks for the
transmission of CATV signals. In upgrade projects, in order to avoid destroying existing Network
structure, An HFC network typically uses coaxial cable for short runs between peripheral
equipment and optical transmission links between head ends.

3. CATV Products
• Dish Antenna
• Coaxial Cable
• Amplifier
• Splitter/ Tap - OFF
• Connectors(RG-11, RG-6 &BNC)
• Ratio Fiber Splitter
List of CATV Products
July 5, 2021
3
Footer Message

4. Dish Antenna
A dish antenna, also known simply as a dish, is common
in microwave systems. This type of antenna can be used
for satellite communication and broadcast reception,
space communications, radio astronomy, and radar.
4

5. Coaxial Cable
Coaxial cable is commonly used by cable operators,
telephone companies, and internet providers around the
world to convey data, video, and voice communications.
5

6. Amplifier
Amplifier is a circuit that has a power gain greater than
one. An amplifier can either be a separate piece of
equipment or an electrical circuit contained within
another device. Amplification is fundamental to modern
electronics, and amplifiers are widely used in almost all
electronic equipment.
6

7. Splitter/ Tap - OFF
A splitter is a device used to split a cable signal between
two or more devices, providing two coax cables to
connect those devices. A splitter weakens the signal level.
This can cause intermittent loss of service or, in rare
cases, complete service failure.
7

8. Connectors(RG-11, RG-6
&BNC)
rg11/6 bnc Connectors Used in Cabling Installation
Techniques. RG6 and RG11 Coaxial Cables have the same
applications used with different distance
8

9. Ratio Fiber Splitter
Splitters are used to split the fiber and its signal. A signal
from the Aggregation Switch is sent along a run of fiber.
When it reaches a Passive Optical Splitter, mirrors and
glass in the component split the light into two, or three, or
more fiber strands.
9

10. 10
CONTACT
WEBSITE
www.unisolcommunications.com
PHONE
+91 98800 09520
EMAIL
info@unisolcommunications.com
10