1. Profile
Coiled tubing field specialist 2
Personal Information
Name: Mohamed Ahmed Mohamed Anwar Ghaly
Address: 9 of Eldobalt zone – Salam city – Cairo – Egypt
Telephone: +201270807463 / +201015930229 / +20226266283
Status: single
Military status: finished
Date of birth: 1 / 5 / 1979
E. mail: moha.ghaly@yahoo.com
Qualifications
Diploma from Technical industrial institute, two years after secondary in 1998
Languages
Arabic: mother tongue
English: very good spoken and written (Primary language in school education).
Experiences
Coiled tubing supervisor that is my position three years ago that at Schlumberger after
many years of experience in multiple industry fields started since graduated from a
technical institute in 1998, worked in a mechanical workshop for four years that was the
best starting where I recognized mechanic and electric hand tools plus working with
machines like Lathe, Drilling, Milling, Grinders machines that besides studying at the
university then after finished studying, started working as an electromechanical supervisor
on installation, operation, and maintenance for oil and gas transferring lines for Petro Jet
petroleum company then. This Followed by working as a maintenance supervisor on CAT
equipment which composed of diesel engines, hydraulic and pneumatic systems for
MANTRAC Company. Then started working with coiled tubing as an operator for Italfluid
then supervisor at Schlumberger All these years of experience have given me a solid
understanding to work with any type of machines and also leading teams for about 10
years, made me standalone fast at Schlumberger as a coiled tubing supervisor, I’ve done
many types of coiled tubing jobs, more than 200 jobs, cat i & ii, deep water and land
without incident and HSE issues, familiar with I coil and fiber optics. The last annual
appraisal from Schlumberger was “exceeds expectation”. Got two promotions from grade 7
to grade 9 in 30 months, and now looking for work outside Egypt which is my country
because I’ve some Ideas for development which is hard to be achieved in Egypt due to
revenue
2. Places of work
From 8 / 2011 to 8 / 2014
Schlumberger
Coiled tubing supervisor grade 9 since 3 / 2014
My job description: - I was the point of contact between Schlumberger and
clients. prepare all paper work for the job, make sure all crew are competent, certified
and understood their assignment, equipment in a good conditions maintained and
submit their certifications, well control equipment are inspected and pressure tested
with valid certification, execute the job as per the signed program and WS QHSE
standards, contingency plans in place, initiate the post job papers and tickets, checkup
equipment before send them to the next job
From 5 / 2009 to 7 / 2011
Italfluid
Coiled tubing and fluid pump operator
My job description: - I’ve started this period as an operator assistant for three
months then became stand alone on both nitrogen and fluid pump for one year then
coiled tubing operator, I’ve done a lot of matrix acidizing, clean out jobs
From 1 / 2007 to 4 / 2009
MANTRAC
Maintenance supervisor
My job description: - Inspect and repair all Caterpillar equipment which
composed of CAT diesel engines Hydraulic circuits and Pneumatic circuits
From 1 / 2004 to 12 / 2006
Petro jet
Electromechanical supervisor
My job description:- Supervising installations of Oil Transfer lines by following
P&ID diagrams after determining of all levels by applying survey methods, then start
install and isolate equipment and finally test them
Skills
Computer skills: - AutoCAD, 3D max, office and internet
Electrical skills: - control panels designing and PLCs programming
Administration skills: - managing and leading teams, problem solving, time management
Courses
Coiled tubing service delivery course in USA Coiled tubing operational course in USA
Well control course in USA QHSE and HARC levels I & ii in Egypt
Control panels design & PLC prog. Courses in Tunisia AutoCAD and 3 D max in Egypt
P.S kindly review my CV It’s a pleasure to work with you