1. AUTOMOTIVE
MANUAL RELEASE BUTTON:
It is used to unlock the clamp when it reaches
final closing position
Safety unlocking system without air supply
KEY STONE:
To protect housings from heavy loads application
Absorbs energy caused by opening/closing movements
2. OPTICAL SENSOR/UNIVER ORIGINAL DF-U:
All metal body
M12 swivel connector
Only one sensor for all clamp and power pivot sizes
Only one sensor for all clamp and power pivot sizes
DETECTION FLAG:
Special solution patented by UNIVER with double flag
Mechanical system for high precision signal in opening/closing position
No adjustment required when changing opening angle
connector at 0° connector at 90°
AUTOMOTIVE
3. AUTOMATIC FLOW CONTROL:
Flow regulator not required
Pneumatic ports on both sides
Possibility to choose Gas or NPT thread
AUTOMOTIVE
4. STEPLESS ADJUSTMENT OF THE OPENING
ANGLE:
Possibility to reduce the opening angle to the minimum required
from 0° to 135°
1 single device
covers the whole range of possible opening angles STEPLESS
The Sensor recognizes automatic the
new angle position reduces stock
requirements for the customer.
AUTOMOTIVE
5. CUSHIONING SYSTEM:
Special solution on piston rod flow regulation allowing, with high loads
ROLLER BEARINGS:
Linear and rotary motion guided by
roller bearings
AUTOMOTIVE
6. SPRING PACK:
Ensures positional repeatability
No backlash in closing position
3 million cycles warranty without maintenance
No external stops
AUTOMOTIVE
7. SPRING PACK:
Possibility to compensate different sheet thicknesses
when clamp arm reaches 90° position
Compensating external and internal tolerances
Avoid metal sheet deformation
Different sheets with different thicknesses
can be compensated by one clamp
CLAMP SIZE 5 bar operating pressure - MAX METAL SHEET THICKNESS
40 + 1.4mm
50 +1.5 mm
63 +2.0 mm
80 +2.5 mm
PIN CLAMP 5 bar operating pressure - MAX METAL SHEET THICKNESS
50/60 + 1 mm
Metal sheet compensation:
AUTOMOTIVE
8. CLAMP ARMS:
Standard aluminum (special treatment)
Steel version available
DIN or NAAMS solutions
15 - 25 - 45 - 50 -70 - 75 - 105 - 120 mm offset
light weight
AUTOMOTIVE
9. Exclusive authorized distributor for Univer North America
Automation/Welding Solutions
6620 Cobb Drive
Sterling Heights, Michigan 48312
Tel: (248) 299-0525 / Fax: (248) 299-0528
1-844-8 UNIVER
sales@ramsolutions.net | www.ramsolutions.net