Hello textile engineers, this is a presentation on Identification of warp and weft in a fabric. Here are some points that is so related with it. Thanks...

1. Submitted To
Md. Faizul Haque
Lecturer
Dept. of Textile Engineering
Daffodil International University
Submitted By
Md. Sirajul Islam
ID: 152-23-4395
Sec: A
Dept of TE

2. >>> Identification of Warp and Weft of A Fabric…

3. 1. THE DIRECTION OF SELVEDGE IS WARP DIRECTION

4. 2. EPI/CPCm IS MORE THEN PPI/PPCm

5. 3. THE COUNT OF WARP IS FINER THAN WEFT

6. 4. WARP YARN IS MORE TWISTED YARN THAN WEFT YARN

7. 5. STRIPE EFFECT IS DONE IN THE WARP DIRECTION

8. AND OTHERS ARE:
• If any yarn contain sized particles then the sized yarn is warp yarn.
• Warp yarns are relatively hairy yarn.
• Crimp is contain less in warp yarn due to high tension on loom.

9. THE END
OR,
PERHAPS THE BEGINNING…