PLSC Model 77 Presentation
•Download as PPTX, PDF•
0 likes•234 views
A simple presentation for the Model 77 lumber coating system from PLS Corp.
Recommended
More Related Content
Viewers also liked
Similar to PLSC Model 77 Presentation
Similar to PLSC Model 77 Presentation (20)
Recently uploaded
Recently uploaded (20)
PLSC Model 77 Presentation
- 1. Introducing the Model 77™ Flood Coating System: Specifically Designed for Medium to Large Lumber Distribution Yards A collaboration by Jody Sanders & Cliff Reynolds Direct Line: 503.382.7929 Email: JSandersPLSCorp@gmail.com
- 3. Portland Lumber Services Corporation MODEL 77 SYSTEM™ • A turn-key flood coating equipment line, with all auxiliary equipment, such as air compressor, air diaphragm pump, hydraulic power unit, and controls, ready to use. • Features high output flood coater, with hydraulic powered double top and bottom back brushes, and side brushes. All back brushes, and powered feed roller are cantilever mounted, with all bearings and hydraulic motors mounted outside of the coating chamber. • Extremely high transfer efficiency; coating is not atomized, but is applied in a flood coat, with subsequent rubber squeegee roll, and back brushes, holding close wet-mil coating tolerances. • Portable drying carts are used for natural drying @ ambient temperatures. NOTE: Three carts are furnished per machine (Additional carts are available at nominal cost.)
- 4. Portland Lumber Services Corporation MODEL 77 SYSTEM™ • Average production (2X6-16') with three employees will consistently exceed 7,700 board feet/hour. However, flood coater is designed for much higher feed rates (many of our machines average 500-600 lineal feet per minute in large factory settings, when coupled to high output lumber transfer systems). • $39,500.00 for complete system, F.O.B. Veneta, Oregon. On-site start-up and production training is included; plus travel and lodging. • Designed and fabricated by folks who have spent decades in the coating industry as owner/operators. We have the hands-on experience needed to get it right!
- 9. Portland Lumber Services Corporation MODEL 77 SYSTEM™ If you’re looking for a team with over 50 years combined experience in the industry to implement a truly TURN-KEY cost-effective coating solution, contact us today. Direct Line: 503.382.7929 Email: JSandersPLSCorp@gmail.com