We would like to take this opportunity to remind you that COVID-19 is a global pandemic hence it is important for all of us to take heed of precautionary measures stipulated by the World Health Organization (WHO) which include the following: • Wash your hands frequently • Maintain social distancing • Avoid touching eyes, nose and mouth • Practice respiratory hygiene • If you have fever, cough and difficulty breathing, seek medical care early • Stay informed and follow advise given by your healthcare provider regards GARAGE&FORECOURT PVT LTD We thank you for your continued support and look forward to your co-operation

1. Catalouge
Corporate Profiling
Products
Services
Taking you through the 21st Century
and Beyond.........
Head Office
Unit 29 Harrow Business park,Msasa,
Harare, Zimbabwe
Tel: +263 4 486 776/9
+263 772 452 732/ +263 774 128 675/ +263717843809
sales@garageforecourt.co.zw, info@garageforecourt.co.zw
www.garageforecourt.co.zw
Bulawayo Branch
69 Josiah Chinamano Road
Donnington, Belmont, Bulawayo, Zimbabwe
Tel:+263 9 474 768
+263 772 452 732/ +263 774 128675
sales@garageforecourt.co.zw,
Developed by
The Department of Special Projects
Garage and Forecourt (C)2019

2. Wayne reliance pump
Ideal for installation in garages
Flow rates up to 100litres per min
Designed to meet all metrological and safety standards on the fueling point
can communicate with the fusion forecourt system
Includes electronic calibration of the Wayne iMeter
Eliminates the need to open the electronic dispenser head through use of a
remote control
Promotes smooth operability through features like error monitoring and enhanced
diagnostics
Quantium™ 310 UHS
∙ A maximum flow rate of 200 litres per minute
∙ Rigid mast-based hose retractor system with an impressive 4-metre nozzle reach
∙ Its robust design ensures it is suitable to work in the harshest conditions with a
wide variety of fuel types
∙ It is tamper-proof through a secure link between hydraulic controller and the main
CPU, with encrypted internal communications adding enhanced security
∙ Our software and hardware is designed to prevent manipulation of
measurements to ensure that you won’t suffer loss of fuel
∙ The lower power consumption si gnificantly reduces your energy bill over the
dispenser’s lifetime
∙ Includes Tokheim Automatic Temperature Compensation (ATC) capabilities
Global Century Fuel Dispenser
∙ Nominal flow rates from 50 to 130 lpm serve both standard and high volume sites
∙ Double-bump connections minimize leaks
∙ Global components to minimize ongoing service costs
∙ Accurate iMeterTMfeatures easy one-step electronic calibration
∙ Large product IDs and backlit sales/volume display facilitate customer interaction.
∙ Easy-access interior makes maintenance easy.
∙ attractive smooth -finish bezel and clean, modern appearance which
complements any forecourt
Commercial and Retail Pumps

3. JB Garage & Forecourt was established in June 2006 to offer a
vast range of specialized Petroleum, Garage equipment
products, fuel handling and calibration services to meet the gap
in the fuel handling.
From small beginnings in 2006, the company has grown to
supplying, installing and servicing pumps for some of the
biggest retail and commercial players in Southern Africa.
We are registered in accordance with the Companies Act and
compliant with the various relevant legislation and regulations of
Zimbabwe including the National Social Security Act, State
Procurement Board, ZIMDEF Act, Standards Levy, Factories and
Works Act and the City of Harare's Health Department.
Today, JB Garage & Foreco urt remains a results and quality
driven Harare headquartered company, committed to providing
garage and fuel handling solutions in a cost effective and
efficient manner making it a supplier of choice in Zimbabwe.
With a team of full-time technicians, electricians and pump fitters
supported by highly efficient administration and management,
our mixture of experience, youthful energy and total commitment
to quality make JB Garage and Forecourt the economical and
logical choice for you.
For your additional peace of mind, Garage and Forecourt has a
Public Liability limit of USD 500,000.00 (Five hundred thousand
United States Dollars) from Old Mutual Insurance.

4. PRODUCTRANGE
Product Range
Today the product range that we offer can be divided into Fuel Handling
equipment, Oil Handling equipment and Garage Equipment with us being
suppliers of Wayne, Prowalco and Tokhem pumps. We also service Gilbarco
range of pumps
pment
Retail fuel pumps,
Commercial fuel pumps,
Fuel Hoses ,Fittings and Valves,
Couplings & Nozzles
Flow, Piston & Bulk Meters
Registers & Totalisers
Price/Totaliser Jog Switch
Flame Proof Electric motors and Piping
Oil Handling Equipment
Pneumatic Oil pumps
Manual Oil pumps
Pneumatic Grease Pumps
Manual Grease pumps
Oil Dispensers
Garage Equipment
Hydraulic and Mechanical Lifting Equipment
Workshop Creeper Beds
Chassis Straighteners & Combination Spanners
Manual and Pneumatic Greasing Equipment
Battery Chargers & Tyre Changers
Computerized Wheel Balancing Machines
Forklifts Services and repairs
Fuel Handling Equipment
Oil Handling
Garage Equipment

5. Quantium 330
∙ Designed specifically for the requirements of the India, Africa & Middle East
markets
∙ A flow rate option of up to 130 lpm
∙ It’s equipped with a secure link between the pulser and the main CPU adding
significantly to enhancing security
∙ It is tamper-proof through a secure link between hydraulic controller and the main
CPU, with encrypted internal communications adding enhanced security
∙ Our software and hardware is designed to prevent manipulation of
measurements to ensure that you won’t suffer loss of fuel
∙ The lower power consumption significantly reduces your energy bill over the
dispenser’s lifetime
∙ Includes Tokheim Automatic Temperature Compensation (ATC) capabilities
Couplings
56mm Socket Range
∙
1" Nominal Bore
∙
Uses: Transfer of food, pharmaceutical products, chemical dosing and other
equivalent functions.
∙
Connections Available: 3/4" and 1" BSP and NPT.
∙
Material: Aluminium, Bronze, 316 Stainless Steel
∙
Seals: Standard Viton -others available on request
∙
Recommended Maximum Flow Rate: 120 L/min
∙
Max Operating Pressure: 10 Bar
∙ Max Coupling Pressure: 4,5 Bar
70mm Socket Range
∙
11/2" Nominal Bore
∙
Uses: Used in similar applications to the 56mm range, filling of mini bulk and IBC
containers.
∙
Connections Available: 11/2" and 2" BSP, NPT and Flanges.
∙
Material: Aluminium, Bronze, 316 Stainless Steel
∙
Seals: Standard Viton -others available on request
∙
Recommended Maximum Flow Rate: 500 L/min
∙
Max Operating Pressure: 10 Bar
∙
Max Coupling Pressure: 4,5 Bar
API Range
∙
4" Nominal Bore
∙
Uses: Exclusively used for the bulk transfer of Petroleum Products.
∙
Connections Available: TTMA 4" Flanges, manufactured in accordance with API
R.P. 1004.
∙
Material: Aluminium
∙
Seals: Viton
∙
Recommended Maximum Flow Rate: 3500 L/min
∙
Max Operating Pressure: 10 Bar
∙
Max Coupling Pressure: 4,5 Bar

6. Nozzles
Aluminium heavy Duty 1 Nozzle
∙ Cast aluminium body
∙ For use with gravity or electric pumps
∙ Complete with 1 1/2 BSPF swivel inlet
∙ Max. pressure 87psi (6bar), max. flow 280L/min
∙ Manual or automatic shutoff options available
ZVA Slimline 2 Fuel Pump Nozzle
∙ Automatic fuel nozzle
∙ Maximum flow rate: 80ltr Per Min
∙ 2 position stay open latch
∙ No 4 trigger guard
∙ ATEX, EN13012 and TUV-SUD approved
∙ Supplied with ¾” or 1” F BSP Swivel
∙ Splash guards available on request
∙ Suitable for diesel and petrol
Aluminium Manual Nozzle
∙ Cast aluminium body. BSPF swivel inlet
∙ Can be usesd with gravity feed tanks or electric pumps
∙ Integral hook for tidy storage when not in use
∙ Max. pressure 3.5bar
∙ Available with 1" swivel brass hose tail
Open Hose Reel
For oil, grease, air and water.
Steel braded oil resitant rubber hose.
Transfer Pump for connection to bulk tank or drum.
Remote stub pump version can be wall or floor mounted.
Double acting air operated pump for transferring oil and non-corrosive liquids.
Includes a bung adapter G2” (m).

7. Enclosed hose reel
∙ With longer hose lengths for oil, grease, air and water
∙ Can be mounted on the ceiling, the wall or the floor
∙ Supplied complete with a pivoting wall bracket.
∙ All hoses are fitted with swaged couplings
∙ Series CRO 10/15m long with 1.2" diameter with working pressure of
7.5MPa/75bars
∙
DistributionKit
For drum with wall mounted
pump,Enclosed hose reel & Hose end meter
connection hose length 2m/4m/6m
Transfer Pump
∙ For connection to bulk tank or drum
∙ Remote stub pump version can be wall or floor mounted
∙ Double acting air operated pump for transferring oil and non-corrosive liquids
∙ Includes a bung adapter G2” (m).
Low Pressure High Performance Oil Pump∙
For applications requiring higher flow rates.
∙
Suitable for connection to a bulk tank or drum.
∙
Can be wall or floor mounted.
∙
Double acting air operated pump for oil and non-corrosive liquids.

8. ∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
Deluxe Mobile Oil Dispensers
For 20 and 60 litre drums
Consisting of a pump, fitted to the lid of a protective container, oil hose & oil
control valve
26016 with hose length of 3m quantity of 60l and pressure ratio of 1:1
26006 a hand pump with hose length of 1.5m quantity of 60l
25006 a hand pump with hose length of 1.5m quantity of 20l
Electric gear Pumps
Built in by-pass and pressure switch for controlled oil dispensing
The pressure switch switches the pump on/off automatically
when the oil valve is open/closed.
Minimum pressure 6 bar
Self Ptiming electric gear pump
Suitable for use with hydraulic oil and other lubricating oil
Inlet:G3/4"(f)
Voltage:230 V, 50Hz
Hose End Meters
∙ Complete with Swivel
∙ Inlet strainer
∙ Outlet hose
∙ battery and non-drip nozzle
∙ Max pressure at 7 MPa, 70bar
∙ Capacity of 20litres/min
Rotary pump for Oil
Made with Cast iron
26 mm outlet pipe
G2" (m) bung
900mm tube in 3 sections
Capcity of 0.25l/turn and weight 5.1kg∙

9. Plastic measures
∙Measuring jugs with handle
∙Made of heavy Polyethylene
∙Resistant to oil,gasoline& chemicals
∙Volume 1,2,3 & 5 litres
∙
∙
∙
Mobile pump for Chasis lube
Complete unit for 180 kg drum
Consisting of an oil pump, pressure ratio 15:1
1/2" hose(4m) with quik coupling for grease
∙
Delivered with trolley for 180 kg drum
∙
Dimensions 450 x 620 x 1.200 mm
transfare to chasis lube containers
∙
∙
Mobile Grease pump
∙ For 12-20 kg and 50 kg drums
∙ Consisting of a pump fitted to the lid of a
∙
Includes air coupling, grease hose, z swivel &
Mounted to a four wheeled trolley
Dimensions 365 x 680 mm/ 295 x 375 mm
grease control valve
protective container
Dripholsters
Protects hose end meters when not in use and collects any oil drips
Oil contol valve
∙ High volume oil control valve for high flow of lubricants
∙ Two valve operation
∙ Lockable trigger
∙ Ball bearing swivel
∙ Max pressure at 10 MPa, 100bar
∙ Max flow at 70litres/min
∙ Rigid outlet tube with semi automatic non-drip nozzle

10. ∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
Fill-Rite 806 1" Flow Meter -3 Digit
∙ Robust nutating disc flow meter shows up to 999 litres
∙ 19-75L/min. 1" BSPF ports & inlet strainer 250 micron
∙ Max pressure 3.5bar(gravity flow)
∙ Accuracy of +/-1% with adjustable calibration
∙ Aluminium housing & cover
∙ 3 digit register. 6 digit non ressettabletotaliser
∙ Front Face can be rotated in 90 degrees increments
Flow Meter K33/K44
∙
Robust nutating disc flow meter shows up to 999 litres∙
20-120L/min. 1" BSPF ports. Ideal for pumped systems∙
Max pressure 10bar∙
Accuracy of +/-1% with adjustable calibration∙
Aluminium housing & cover∙
3 digit register. 6 digit non ressettabletotaliser∙
Front Face can be rotated in 90 degrees increments∙
Not suitable for petrol & dry solvents
Oval Flow Meter K400
∙ Robust oval gear type meter shows up to 99999 litres
∙ BSPF ports process connections
∙ Max pressure 70bar
∙ Accuracy of +/-0.5%, max temp 60 degrees
∙ Aluminium construction, Acetic resin rotors
∙ Electronic display with 5 digit register. 8 digit totaliser
∙ Powered by 2 x AAA batteries
∙ Can be used with antifreeze
Portable Grease pump
Round container
Complete with hose & hydraulic coupling
Volume of 16kg with 7.5 grams/stroke
Max pressure of 15MPa(150bar) Weighing 7.3 kg
Dimensions 490 x 240 x 630 mm/ 295 x 375 mm
High Pressure Grease pump
Pump mounts directly to a standard grease drum
including handle,drum lid, high pressure hose,
outlet tube & hydraulic coupling included
2 grams/stroke
Max pressure of 35MPa(350bar) Weighing 7.3 kg
Dimensions(drum lid) 265-310 mm

11. ∙
∙
∙
∙
∙
Proflow Bulk PD Flow Meters
∙ Robust positive displacement mechanical design
∙ Low pressure loss, long service life
∙ Max pressure 10bar(LPG 19bar)
∙ Calibrator adjustable to 0.25% custody accuracy
∙ Aluminium, S/S & cast iron
∙ Sizes range from 40mm to 150mm
∙ Max temprature 80 degrees
∙ Can be used with antifreeze
Proflow Truck PD Flow Meters
∙ Robust positive displacement mechanical design
∙ Low pressure loss, long service life
∙ Max pressure 10bar(PTM-100=5bar)
∙ Calibrator adjustable to 0.25% custody accuracy
∙ Aluminium,cast iron
∙ Sizes range from 50mm to 100mm
∙ Max temprature 80 degrees
Can be used with antifreeze
Garage Equipment
Hydraulic and Mechanical Lifting Equipment
∙
2 Ton Hydraulic Bottle Lift Jack
∙
10 Ton Hydraulic Bottle lift Jack
∙
12Ton Hydraulic Bottle Lift Jack
∙
50 Ton Hydraulic Bottle Lift Jack
Two electromechanical columns∙
Capacity of 5 tons
∙
Specially designed for lifting heavy -duty, specially -armored vans and prestige
cars
∙
Equipped with 4 long 3-stage symmetrical arms
∙
Pads height is adjustable through threading

12. 3.Lower Fuel Costs
Through increased security, precise data for billing and less fuelling errors, you can save up
to15%in fuel consumption with an automated fuel management system!
4.Be�ertracking,opera�on-wide,inreal�me.
Automation can generate across-the-board efficiencies. It virtually eliminates human error,
assuring timely, accurate and detailed information capture for each vehicle and each
fuellingsession.
The ability to track details such as run and idle time can pinpoint opportunities for improved
driver training, eliminating wasted fuel. You’ll get the most from the fuel you have and
reduce unnecessary wear-and-tear on your fleet.
Automatic record-keeping ensures consistent regular maintenance, and real-time
information allows early response to potential problems. You’ll improve vehicle
performance and keep your fleet on the road longer.
You’ll always have complete data at your fingertips for reporting and financial purposes
and for management review, analysis and decision-making.
4.You’reincontrol,atlast.
Streamlining processes and ensuring accuracy and timeliness of record-keeping. Capturing
valuable data to assess and refine operations. Curbing fuel losses and identifying potential
problems before they get out of hand. It all adds up to bottom line savings, year in and year
out.
The bottom line: your fuel management system can quickly pay for itself.
Below are the essitimated losses that may be enccuredby a dealer from month to month,
including amounts of returns that are never realised due to skimming and other fraudulent
practices.

13. FUSION FUEL MANAGEMENT SYSTEM
Why a Fuel management system.
The fusionfuel management system is a technology-based tool that works with any pump-
able liquid or gaseous fuel for attended or unattended fuelling sites. The system provides
real-time visibility of all aspects of fuel management and fuelling activities, using
automation to free up drivers and capture information that’s instantly available to any staff
who may need it.
A fuel management system can provide broad-scale benefits for:
Fixed-base or mobile fuelling operators.
Fleet operators such as smaller transportation companies that handle fuelling internally.
Municipalities managing vehicles for utility crews,
police, fire or the general motor pool.
It can even function entirely hands-free, allowing you
to fully capitalize on security measures and gather
comprehensive data to identify additional time and
money savings. Here are key benefits:
1.Be�ersecurity.
Fuel losses are frustrating and costly. With a fuel management
system, you always know what you have and where it’s going. And
you can keep it from going astray.
2.Reduce Fraud and Abuse
Fuel theft and abuse isn’t uncommon in the fleet industry. To
ensure that your drivers are fuelling their vehicles properly,
you should invest in a fuel system to verify that they’re
fuelling the right vehicles at the right station at the right time.

16. Main Module (MPDM)
PartNo
Each MPDM has connections to control up to four solenoid valves and is
equipped with a key switch with normal operation, emergency over-ride
and On/Off functions. Suitable for meter units with flow direction function.
230 V AC powersupplyrequired 23400
Approvable Main Module (MPDM)
Each MPDM has connections to control up to four solenoidvalves and is
equipped with a key switch with normal operation, emergency over-ride
and On/Off functions. Has a built in printer modul for storage of
transactions and local outprints. 230 V AC powersupplyrequired 23600
10
OriLink®
Key Pad, Standard
To be installed in the workshop in order to give the operator access to the
system using a personal ID-code. 2 x 16 signs window, 20 buttons display.
Can be equipped with serial port kit (23415) for external reader
(23407 or 23409). 23401
Transparent protection cover for the 23401, and the 23410. 23261
Wall bracket for keypad. 23260
PC -keypad
The PC -keypad makes it possible to start and stop dispensing from a PC by
clicking on a dispensing point. Also works with touch screen and OCP 1.xx
connections. 23431
Printer Module
With the printer module it is possible to connect a printer to the system
(Model 23354). When the system has no PC (Program 23414) the
information is stored in the printer module. Maximum 912 transactions,
32 users and 8 tanks can be stored. A system can have more than one
printer module where there is a need for more than one ticket printer. 23402
Communication Adapter/PC-interface
For connecting the system to a PC. Can also be used as a line amplifier
when the communication cable is longer than 2.000 metre.
23403
LED Display
Display with 40 mm digits. Displays the dispensed volume. When equipped
with a clock module or PC-connected it shows the actual time when the
system is not in use. One extra port for asolenoidvalve. 23404
Can be used as tank level display together with 23408 or 23430.
Tank Module
The tank module has four connections for controlling air solenoid valves to
start and stop the pumps and can also work together with a low level or
low and re-order level sensor.Is equipped with a key switch with normal
operation, emergency override and On/Off functions. Controls waste oil
solenoid valves plus the re-order warning on the PC. This module only
works together with PC software 23414. 230 V AC powersupplyrequired. 23408