1. KUNLIN TECH
Louis.lee@kunlintech.com
Servo Drives Factory building and Surrounding Environment
Full Series AC Servo Drives&Motors
RIDING®
AC SERVO DRIVES&MOTORS
Kunlin Tech is committed to serve world-wide industry clients with the most professional&optimized
automation products and help realize the biggest customer’s value.
With high reliability&stability and unrivalled performance, our servo drive&motor quickly wins
various industry clients,ranking top 5 among the servo drive&motor market shares in China.
Annual output of servo drives in 2106 exceeded 200,000sets, famous client like OTIS ELEVATOR
Based on the optimized cost &performance and high quality, we are confident that our products
can benefit and better more and more clients around the world.
2. KUNLIN TECH
Louis.lee@kunlintech.com
SVPWM Sinewave drive
High integration,high precision, quick response
AC220V/380V -15%~+10%,50/60Hz,single phase or three phases
Support Modbus, CANopen and EtherCAT. E-Gear, Support 17bit absolute encoder
Instruction sequence input(CONT1~5) :RUN,RST,+OT,-OT, EMG, Removal of deviation, FWD,REV,
Multi-speed-1,Multi-speed-2
Instruction sequence output(OUT1~3): RDY, PSET,Alarm detection:a contact, alarm detection:b
contact, OT detection, 0 deviation, 0 speed
Encoder Signal Output
Pulse output setting 16~2500(pulse/rev)
Signal modes: thread drive output A phase,B phase,Z phase, open-collector output Z phase
Position Control
Multi-control modes: speed, position, torque, position-speed/torque, speed-torque
Max input pulse frequency 500KHZ,collector open,200KHZ
Input pulse signal: RS422 drive signal, collector-open signal
Input pulse types: command pulse/command symbol, forward pulse/reverse pulse, 90degree phase
difference signal
Command pulse compensation, four command pulse compensation settable and switchable,
Input position control: command pulse compensation α choice 1, command pulse compensation α
choice 2,removal of deviation,forbidden command pulse can be set in instruction sequence
input(CONT1~5).
Speed Control
Speed control scope: 1:5000
Acceleration/deceleration: 0~10s for 0~max RPM, 2 acceleration/deceleration time, S curve
Input outside speed command: analog voltage command for speed control -10V +10V
3 speeds in inside parameters.
Input speed control: multi-speed 1,multi-speed 2, forward, reverse, acceleration/deceleration time,all
set in CONT1~5
Torque Control
Input outside torque command: analog voltage command for torque control -10V +10V
Input torque control: forward, reverse, acceleration/deceleration time,all set in CONT1~5
Full monitor functions: Feedback speed, the command speed, the average torque, peak torque, feedback
current position, command current position, the position deviation value, linear bus voltage, the radiator
temperature, input voltage, output signal, input signal, Command accumulative pulse, input pulse
frequency, the present alarm, alarm records, sequential pattern
Full protection functions: Over cuurent,over speed,over voltage,encoder fault,control supply fault,memory
fault,overload,under voltage,over-heating of regenerated transistor,regenerated resistor over-heating,over
deviation,over-heating of amplifier
LED display 5 digits, Zero speed clamp
Key Technical Specifications of AC Servo Drives&Motors
3. KUNLIN TECH
Louis.lee@kunlintech.com
Universal AC Servo Drive&Motor
Model No.: DHE Series
Single/three phases 220V,
Three phase 380V,
50W~5.5kW
Models & Size of Servo Drive&Motor
Double Axis Control AC Servo Drive
Model No.: DHD Series
Single/three phases 220V,
Large Power Servo Drives
Model No.: DHP Series
Three phases 380V
3~55kW