2. Solidworks & AutoCAD1
Solidworks:
the choice parametric modeling
software in the industry, and ideally
suited for most 3D printing and CNC
applications.
AutoCAD:
The old guard megalith of
computer design.
Most widely used and
arguably most power-
ful CAD program on
the market.
The two pieces of software most used for the designs
shown herein are Solidworks and AutoCAD

3. Masters:
Designed entirely in Solidworks, these are
masters for a steampunk (Victorian science
fiction) themed chess set. The initial prototypes were 3D
printed in ABS plastic on an FDM device. The final proofs
were printed using a high resolution stereolithography.
The masters are to be used to produce silicone molds for casting full
sets in plastic, and also white and dark chocolate.
3D Printing 2
Steampunk Chess Set

4. CNC Milling3
Electric Violin:
Final prototype (unstrung)
Electric Violin conceptual
development and fabrication.
Concept through prototype...
Designed entirely in Solidworks. This version was
produced without the electronics pockets that
would be present in a production model.
The bout and chinrest were CNC milled out of
model board and ABS plastic, respectively.
FDM 3D printing was used to prototype the com-
plex dragon tuning box before it and the neck were
also CNC milled out of solid teak wood. The piece
was finally painted and finished for presentation
using surplus automotive paint and clearcoat to get
a lustrous metallic finish.

5. Vacuum form
SHIELD Seal
(replica of wall mounted seal
from Marvel’s films)
CNC milled base piece created out of
model board.
Final part vacuum formed out of poly-
styrene.
Finishing using enamel base coat and
acrylic drybrush technique to simulate
brushed bronze.
Vacuum Forming 4

6. Robot Skull Casting
Final production casting of robot skull prop (left) and original (right)
Glove mold with silicone insert, original, and
freshly cast replica
In progress production of display for
casting (prior to lights and wiring)
Molding & Casting5

7. Buckaroo Banzai Motorcycle
Tank
Refurbishing of motorcycle fuel tank using the
motif and paint scheme of the cult sci-fi film
“Buckaroo Banzai” . This is under consideration
to be installed on a show bike to be used at Sci Fi
conventions.
Finishing 6

8. <—Redesign proposal for NWTC Prototype lab.
Doors and windows laser cut from acrylic, mills,
saws and drill press 3D printed for scaled accu-
racy.
1:60 scale wargaming model of a crypt
Topographical landscape model of vol-
canic fissure.
The top view to the right shows the la-
va beneath the surface, illuminated by
a battery operated LED candle
Environmental Modeling7

9. Architectural Modeling 8
1:48 scale architectural reproduction of the birthplace of Earl “Curly”
Lambeau, founder of the Green Bay Packers. Originally constructed
in 1868, the house was restored as a historic site around 2008. The
AutoCAD files from that restoration were used to create the model
seen here.
< The actual house in Green Bay
< during the painstaking
process of matching the
aged brick pattern
The brick walls are formed polystyrene, the
siding is individually cut polystyrene strips.
The stone foundation was sculpted by hand,
then molded and cast in epoxy resin.
The fence is laser cut acrylic.

10. Fob Watch Housing
A digitally designed and fabricated pocket watch housing for the Motorola 360 smart watch.
Hockey Sled Custom Redesign
Specially designed sled concept and
scale prototype for sled hockey.
Created for paraplegic athlete
with cerebral palsy.
The specially designed
backrest folds down to form a
ramp so the player can strap
himself for play unassisted.
Conceptual Design9
The initial concept was developed
in Solidworks as an assembly.
Individual parts and drafts
were 3D printed (FDM) in ABS
plastic. Final proof is high
resolution SLA printed.
The final proof, ready for molding. >

11. Proposed custom design for a
home bar and wine holder
Memorial Bench
Original concept picked up and de-
veloped by NWTC students to ulti-
mately be fabricated and installed
as a memorial bench to a deceased
city planner of Green Bay, WI
(shown installed below)
Conceptual Design 10
Bicycle pedal and
crank concept
Steampunk switch
plate and outlet covers
prototypes
^
3D printed scaled prototype of bench
Commemorative plaque for the widow >
My original concept sketches proposed
at the first exploratory meeting in 2013

12. Creatures & Creations11
Occasional make-up
and prosthetics work.
Custom Creations and Creatures
Props, makeup, custom hats, and costumes, fabricated and finished by hand.
Custom created hats and
Monster Babies were notable
successes of the products by
Visualante Creative Endeavors
Monster Babies in production (right)
and on display (below)

13. Nightwolf
Fantasy Wargaming Ship
A two level representation of a fan-
tasy flying ship used in miniature
wargaming. 1:60 scale.
Laser engraved deck with 1” grid pattern
Mixed media projects 12
Codex Exemplar
(Latin: book of models)
Concept prototype for digital portfolio
presentation. Book is designed to
house a 10 inch tablet that can display
a digital portfolio, including interactive
parametric models

14. 1
9
9
4
1
9
9
5
1
9
9
6
1
9
9
7
1
9
9
8
1
9
9
9
2
0
0
0
2
0
0
1
2
0
0
2
2
0
0
3
2
0
0
4
2
0
0
5
2
0
0
6
2
0
0
7
2
0
0
8
2
0
0
9
2
0
1
0
2
0
1
1
2
0
1
2
2
0
1
3
2
0
1
4
2
0
1
5
Lee C Fraser
6 Stuart Drive
Dover, DE 19901
512-587-4196
LCFraser1974@gmail.com
Visualante Creative Endeavors
Austin, TX
Owner/Artist
2003 - 2011
Design and art for hire. Sculpted Hats, Painted Hats, Installation Art,
Display design, Doll/toy design, Event Flyer/Poster Design, Steampunk
Designs/Mods, Costume/Make-up Designs, Mixed media Sculpture,
Sculpting/casting, Miniature/Model building & Design, Mixed Media fine
art, Garde Manger food art.
512th Airlift Wing,
United States Air Force Reserve
Dover, DE
Public Affairs (GS3)
1998 - 1999
Layout and graphic design, public, community and media relations, web
design, tours and photography. Developed custom graphics and ar-
chived official logos, photographs and biographies.
 IPMS Equipment Custodian training
 Quality Awareness Training.
Independent Newspapers, Inc.
Dover, DE
Graphic Designer/
Compositor
1996 - 1998
Developed numerous full color, spot color and monochrome commercial
ads and house ads for multiple publications. Performed layout, hand
paste-up, pagination, and design of daily and weekly publications and
special addition tabloids. Custom logo design. Digital image editing/
alteration and photographic adjustment for print. Additional duties includ-
ed limited web design.
Delmarva Online!
Salisbury, MD
Webmaster/Chief De-
signer
1995 - 1996
Developed commercial web sites for commercial clients. Dealt directly
with clients in initial design phases. Was responsible for look and
graphic/HTML maintenance of ISP web presence. Designed internal
graphics. Occasionally assisted sister company (CBS affiliate, Salisbury,
MD) with TV news graphics. Coordinated several part-time staff mem-
bers.
Diamond Post Group, Inc.
Felton, DE
Design Intern/Assistant
Designer
1994 - 1997
Assisted in animation and design work for everything from commercial
animation to conceptual design and custom artwork. Presented with
company at several trade shows.
Employment and Education Timeline
Northeast WI Technical College:
Prototype & Design Technology
Texas Culinary Academy:
Culinary Arts
Essential Design Skills
 Conceptual Design: development from abstract concept to final prototype
 Parametric Design & CAD Software: SolidWorks, AutoCAD, SurfCAM,
CorelDraw
 Shop Power equipment
 Molding & casting
 Automated Fabrication technology: Additive Manufacturing Devices (3D
printers), CNC mills,
 Finishing Processes: sanding, painting, paint guns/ booth, clear-coating,
brush techniques, airbrush, touch ups, restoration
 Materials: ABS, pattern/model board, nylons, woods, plaster, silicone,
epoxy
Office Skills
 Microsoft Office
 Typesetting software
 Public relations and press releases
 Basic HTML knowledge
Design Software Experience
 Solidworks
 AutoCAD
 SurfCAM
 Photoshop
 Sketchup
Key Education and Achievements
Prototype & Design Technology (AAS)
Northeast Wisconsin Technical College
May 2015
_____
AutoCAD certification
Austin Community College
February 2011
_____
512th Airlift Wing,
US Air Force Reserve
Dover, DE
Public Affairs
Art Institute of Philadelphia:
Animation-Media Arts
Diamond
Post Group, Inc.
Felton, DE
Design Intern/
Assistant Designer
Independent
Newspapers
Dover, DE
Graphic Designer
Compositor
Pertinent Employment History
Austin Community College:
AutoCAD Certification
 Service Industry: Cook, Bartender, Server
 Specialty Food/Gourmet Retail
 Periodic graphic design contracts
 Retail Management (seasonal)
Visualante
Creative Endeavors
Austin, TX
Owner/Artist
Delmarva Online!
Salisbury, MD
Webmaster
Lead Page Designer