Explore the diverse universe of pavement line markings in this comprehensive guide. Uncover the nuances of thermoplastic, reflective, and temporary line markings, delving into their unique applications and benefits.

1. Types of Line Marking
TOLL FREE : 1-888-728-3636 TORONTO : 416-410-3705
info@suresealpavement.com

2. Understanding Pavement Line Marking
• Pavement line marking is an essential factor in traffic management to enhance the safety of
motorists and pedestrians.
• Across the GTA, there are various line markings used to direct the flow of traffic, reduce the risk
of accidents, and provide guidance on the moving and parking of vehicles.
• There are longitudinal markings, traverse markings, hazard markings, block markings, and
arrow markings, all with their own purpose and distinctive design.
Reference: https://www.suresealpavement.com/types-line-marking/

3. Type 1 - Longitudinal Line Markings
The yellow and white line markings, like those seen on
roadways between traffic lanes, guide motorists on which
direction to drive and when it’s safe to change lanes.
• Yellow painted lines are a non-dimensional barrier
intended to keep vehicles travelling in one specific
“lane”.
• The white lines indicate to motorists not to cross into
an area. The structure of the lines differ in traffic
management.
Continued…

4. Type 1 - Longitudinal Line Markings
• Continuous lines: These white- and yellow-coloured lines on a roadway indicate it is unsafe
to pass another vehicle or to venture on the other side of the line.
• Broken lines: A broken line to the left of a vehicle on a roadway allows for passing if the
coming lane is clear or may signify the current lane is ending if present in a construction zone
or exit lane.
• Double yellow lines: A double yellow line alerts motorists not to pass the vehicle ahead of
them due to an upcoming obstacle or an unsafe passing lane.
• Lane reduction lines: These broken lines are used only to notify of an upcoming end to a
lane on a roadway to allow for traffic management.

5. Type 2 - Transverse Line Markings
• Transverse line marking are used in
situations where an immediate action is
required by the motorist.
• Transverse line markings that cross an
area of the pavement can exist as a
broken line, a single line, or a double
line marking.
Continued…

6. Type 2 - Transverse Line Markings
• Stop lines: A wide traverse line in white paint at the end of a parking lot or at an intersection
indicates a full-stop of the vehicle is necessary to prevent an accident or collision with another
vehicle.
• Crosswalks: Painted lines on the pavement depicting a pedestrian crossing zone may appear
as white or yellow straight or diagonal lines across a roadway.
• Yield lines: For enhanced traffic management on a roadway or in a parking lot, yield lines are
painted on the pavement.
• Speed limit markings: Similar to the standing signs, speed limit markings indicate the legal
travelling speed of a vehicle in a parking lot or within a zone.

7. Type 3 - Hazard Markings
• Pavement markings that indicate a
hazardous conditions or potential for such
are accompanied by standing signs in the
immediate area.
• This form of traffic management reduces
the risk of collisions and accidents.
Continued…

8. Type 3 - Hazard Markings
• Chevron markings: A reversed V-shape marking signifies an upcoming obstacle, hazard, or
barrier as seen with a division of road lanes or shift in traffic flow.
• Diagonal markings: Whether in yellow or white-coloured paint, these lines are applied to an
area where no parking or stopping by motorists is allowed.
• Hatch markings: Not to be confused with pedestrian crossing lines, hatch markings
designate a zone of no-entry or crossing areas.

9. Type 4 - Block Markings
• Block markings are commonly used on
roadways to extend the continuity of a
designated line or marking across an
intersection or access road.
• In parking lots, block markings are used to
manage the parking of vehicles and to
control foot traffic.
Continued…

10. Type 4 - Block Markings
• Parking stall markings: Designated parking stalls can also involve handicap, family, and/or
expectant mother parking slots close to the entrance of the building.
• Loading zone markings: Commercial businesses need specialized loading zone markings for
the accessibility for all deliveries. The markings are for both safety reasons and logistic
reasons.

11. Type 5 - Arrow Markings
• Arrows are a common method of directing
the flow of traffic on a roadway or within a
parking lot.
• They are used to increase vehicle and
pedestrian safety through traffic
management.
Continued…

12. Type 5 - Arrow Markings
• Directional arrows: By guiding traffic flow, directional arrows give order to a parking lot by
helping vehicles maneuver safely in, through, and out of the property.
• Lane direction arrows: The arrows may be applied to lanes separated by a yellow solid line
or can be used for a one-way directional flow of traffic.
• Turn arrows: Application of turn arrows in a parking lot, or on a roadway, are a safety
measure under traffic management and control. These arrows are used to indicate which
lane is designated for turning at intersections.
Reference : https://www.suresealpavement.com/types-line-marking/

13. Contact Us
40 Humberline Drive
Toronto, ON M9W 5X1
416-410-3705
info@suresealpavement.com
www.suresealpavement.com

14. Thank you