Designing AC, DC and Power Evacuation & Aux.SLD along with BOQ load calculations.
• Solar PV Cables, AC & DC Power cable Sizing calculations and its Scheduling and routings.
• Stringing of Solar Modules, Connections of modules (Series & Parallel).
• Solar PV Cables, AC and DC power cables Voltage drop, Power loss calculations.
• Fault level and Short circuit Calculations in Power System.
• Selection of CT, PT, VCB, Transformers, and Substation Equipments.
• Substation Designing, Earthing system Design layout & Calculations.
• SMB (String Monitoring Box) selections.
• Testing of Medium Voltage control panels.
• Execution and commissioning.
• Vendor development.
• Preparation of GTP for Generation Transformer, Switchyard equipments.
• Inspection of LT, HT Panel at vendor place as per specification and detail drawing released for
manufacturing.
• Preparation of design basis, philosophies, equipment selection, studies/reports and
recommendations.
• Engineering and design for Electrical distribution systems.
• Preparation and checking of various specifications & data sheets for HV / LV Switchgear,
Transformer, Switchyard equipment, Technical specification sheet etc.
• Preparation of MR, technical bid evaluation, recommendation & Vendor drawing review.
• Checking of detail design deliverables prepared by engineers / designers and ensure compliance
with Project requirements.
VIP Call Girls Service Bhagyanagar Hyderabad Call +91-8250192130
Kumar bibhav resume
1. Curriculum Vitae
Kumar Bibhav, B. Tech (Electrical Engineer)
Mobile No: +91-9096451357 Email: kumarbaibhav01@gmail.com
Carrier Objective
3 years 9 months of rich experience in designing of electrical systems with more than 1 year of specialized
experience in designing the Solar PV System from General Arrangement layout to AC and DC Systems
design.
Skills: AutoCAD, Microsoft Excel, Microsoft Power Point, Microsoft Word, System Designing, Solar PV
design, Electrical Sizing, Vendor Development, Technical Enhancement in designing solar system, PLC,
SCADA, DCS, control philosophy, Design control philosophy for control panels, Switchgears and Protection
Systems
Work Experience
Enrich Energy Pvt. Ltd Jr. Design Engineer (Electrical) 29th
April 2015 – 9th
May 2016
Vikram Solar Pvt. Ltd Electrical Engineer (Design & Engineering) 16th
May 2016 to till date
• Designing AC, DC and Power Evacuation & Aux.SLD along with BOQ load calculations.
• Solar PV Cables, AC & DC Power cable Sizing calculations and its Scheduling and routings.
• Stringing of Solar Modules, Connections of modules (Series & Parallel).
• Solar PV Cables, AC and DC power cables Voltage drop, Power loss calculations.
• Fault level and Short circuit Calculations in Power System.
• Selection of CT, PT, VCB, Transformers, and Substation Equipments.
• Substation Designing, Earthing system Design layout & Calculations.
• SMB (String Monitoring Box) selections.
• Testing of Medium Voltage control panels.
• Execution and commissioning.
• Vendor development.
• Preparation of GTP for Generation Transformer, Switchyard equipments.
• Inspection of LT, HT Panel at vendor place as per specification and detail drawing released for
manufacturing.
• Preparation of design basis, philosophies, equipment selection, studies/reports and
recommendations.
• Engineering and design for Electrical distribution systems.
• Preparation and checking of various specifications & data sheets for HV / LV Switchgear,
Transformer, Switchyard equipment, Technical specification sheet etc.
• Preparation of MR, technical bid evaluation, recommendation & Vendor drawing review.
• Checking of detail design deliverables prepared by engineers / designers and ensure compliance
with Project requirements.
2. IKE Electric Pvt. Ltd. Design Engineer June 2012 – October 2014
• Design of Electrical control Panels suchas MCC,PCC,VFD Panel & BUSDUCT
• Selection and design of (LV, MV & HV) switchgear system.
• Cross check electrical drawing & released drawing for panel manufacturing.
• Technical inspection in vendor workshops to ensure required quality.
• Testing of control panel in workshop & check fulfill of customer requirement.
• Troubleshoot & solve problems related to design & give online support.
• Preparation of drive selection, switchgear selection and control logic
• Preparation of control panels and different starter logic on the basis of technical specifications
provided by client.
• Testing and Inspection at vendor place and inside self factory to meet the specification and
drawing released for manufacturing.
• Make electrical AUTOCAD drawing with fulfill requirement.
Academic credentials
• B.Tech (Electrical),Bharati Vidyapeeth College of Engineering, Pune, 2012(72%.)
• H.S.C, Bihar Intermediate Education Council (BIEC), Patna,(67%) ,
• S.S.C, Bihar school Examination Board (BSEB), Patna,(62%)
Key Achievements
WORKED AS A DESIGN ENGINEER FOR FOLLOWING PROJECTS:-
• Worked as a lead designer for following Solar PV Projects: 50 MW ENEL Group, 15 MW Mytrah
Group, 65 MW NLC, 16 MW Giriraj Enterprises, 45 MW EREN Group, 50 MW Skypower Group
• Successfully designed Solar System for 60 MW Solar Park in Zaheerabad (Telangana) and 25 MW
Solar Park in Karajagi (Maharashtra)
• 80MW Coal based Power generation plant, (OPG, Chennai)
• 44MW bagasse based Power generation Plant, SSKL (warna, Kolhapur)
• 35 MW bagasse based Power generation Plant, KPR (sindigi, Karnataka)
Date: 11th
March 2016 Thanks,
Place: Pune Kumar Bibhav