Building Owners + Property Mgrs - Applications Focus 9-7-2010v2
1. Copyright 2010 Creative Material Technologies,
Innovative Green
Coating Systems
Solutions for Building Owners
and Property Managers
Presented at: Architects & Specifiers Mtg
Detroit, MI – Sept 7, 2010
Creative Material Technologies, Ltd
2. Copyright 2010 Creative Material Technologies,
New Green Coating Technologies
The New Principles to Specify By:
• Physical Properties
• Application Needs
• 100 Percent Solids- No Solvents or Water
• Crosslink Density for “Barrier Coatings”
• Evolving Environmental Landscape
• Applicable ASTM Standards for these
Technologies
3. Copyright 2010 Creative Material Technologies,
Advantages of CMT Green Polyurea
No VOC’s and Little to No Odor
Some Systems Comply with USDA Regulations
Weather Tolerant: Cures at -25ºF to >300ºF even in High
Humidity
Excellent Resistance to Thermal Shock
Flexible: Bridges Cracks
Waterproof, Seamless and Resilient
Unlimited Mil Thickness in One Application
Spray, Hand Mix and Caulk Grade Materials
Excellent Bond Strengths to Properly Prepared Substrates
Resistant to Various Solvents, Caustics and Mild Acids
Low Permeability, Excellent Sustainability
4. Copyright 2010 Creative Material Technologies,
Advantages Over Other Coatings
1. 100% Solids Means NO water or solvents
- therefore zero or near-zero odor
2. Zero VOC’s (Volatile Organic Compounds)
Defined as less than 5 grams per liter of listed
solvent (one that has atmospherically reactable
carbon on the outer ring of the molecule)
3. Does Not Outgas with any Fumes or Vapors
Out gassing is the result of solvents and/or water
volatilizing into the environment- including exempt
solvents
5. Copyright 2010 Creative Material Technologies,
Advantages Over Other Coatings
4. Rapid Cure Time = Short Down Time
Back to service as quick as 10 minutes
5. Very Tough and Durable Coating
Excellent and Impact resistance with high
elongation ( 700+ %)
6. Aliphatic Coatings are Very UV/Sunlight
Resistant; Ideal for Outdoor Applications
7. Wide Thickness Capability – from 5 to 300
Mils or More
7. Copyright 2010 Creative Material Technologies,
Typical Physical Properties of Polyurea
“The Key to Formulating for Performance is Balancing Properties”
8. Copyright 2010 Creative Material Technologies,
Current Environmental Landscape
• LEED Credit Qualified
• Green Tax Credits Available (Jurisdictional)
• EPA-OSHA Issues
• Arsenic In PT Wood
– EPA action expect to address ground
contamination and human contact
• Flash Point Regulations
• VOC Regulations – (Reducing or Eliminating)
– i.e. New York City’s New Code
• OSHA Spraying regulation-
– Exposures to ISO Free Monomer
9. Copyright 2010 Creative Material Technologies,
Coatings Needs Assessment
• The Specifier of Every High Performance
Coatings Application MUST ASSESS the
Following:
Best Application Method
Required Physical Properties
Potential for “Catastrophic” Failure
either in intercoat adhesion failure,
primer failure, or coating failure
Required Surface Preparation
20. Copyright 2010 Creative Material Technologies,
Benefits to
Architects and Builders
• Green Environmentally Safe products
• Long term solutions sets with long
service life cycles
• Prevents Early Life Cycle Maintenance
Costs
• Ease of installation
• Non disruptive applications
• No Solvents or Out gassing
21. Copyright 2010 Creative Material Technologies,
Benefits to Specifiers
• Green solutions
• Superior solutions offering very
long service life
• Zero solvents and EPA complaint
• Quick Return to Service
• Adaptability to the life cycle needs
of the facility or property
22. Copyright 2010 Creative Material Technologies,
Benefits to Your Customers
• Safer user friendly
• Zero solvents and Low Free
Monomer formulations
• One day turn around
• Decorative Coatings with Industrial
Properties
• Easy to Ship Not a HAZMAT
23. Copyright 2010 Creative Material Technologies,
Creative Material Technologies, Ltd.
“Solving Today’s Problems with
Tomorrow’s Technologies”
What Problems Will We Solve Together?
WWW.DYNASOLV.COM