2010 series warmers

1. nice NeÖtech Medical Systems Pvt. Ltd

2. Presentation Flow
COMPANY OVERVIEW
CLINICAL ASPECTS OF nice 2010
SERIES WARMERS
PRODUCT OVERVIEW
TROUBLESHOOTING

3. Company INFO
 Established in the year 1997
 Group of highly skilled professionals
 4000+ highly satisfied customers
 Deep penetration in NICU and respiratory domain
 User friendly range of products
 With deep skills and high end technology , we always strive
for growth and delighted customers

4. Timeline-nice Neotech
2005
•First New
Factory Unit 1
Opened
•Increase in
production Line
2001
•Registered as
Pvt ltd
•Production
started for
different models
2013
•Second New
Factory Unit 2
Opened
1999
•Neotech Logo
Designed
•Designed first
incubator & open
care prototype
2003
•Export to
Vietnam
2009-
2011
•CE certification
for products
2015
•125+skilled
employee strong
firm
•Multiple range
of NICU products
1997
•Started Neotech
Medical Systems
with 2 employees
•First Infant
Radiant Warmer

5. Why nice Neotech ?
 User friendly range of products
 Customized solutions
 Ethical Business practices
 Stringent quality control management
 Complete customer satisfaction

6. Why Infant Radiant Warmers are Used?
Supplement Heat Loss via four
modes of heat loss(refer next
slide)
Assist Thermoregulation
Body warming by providing Far
IR radiant heat
Ensure baby is stabilized after
birth
INFANT RADIANT
WARMERS

7. MODES OF HEAT LOSS:
 Conduction Heat Loss:
Direct heat transfer from skin to object
 Convection Heat Loss:
(i) Heat loss through air flow
(ii) Also depends on Air Temperature
 Radiant Heat Loss:
Direct transfer by electromagnetic radiation in infrared spectrum
(i) Heat gained by radiation from external radiant energy source.
(ii) Heat lost by radiation to cooler walls of incubator.
 Evaporation Heat Loss:
Heat loss when water evaporates from skin and respiratory track.
Depends on maximum relative humidity of surrounding
Less Humidity = More Evaporation
 Heat Loss(watts/meter square)
Evaporation: 60-80 watts/meter square
Radiation: 50 watts/meter square
Convection: 25 watts/meter square
Evaporation: Negligible
Total Heat Loss: 135-155 watts/meter square

8. Electromagnetic Spectrum
Infrared Spectrum

9. Effects of Far IR in Infant body
Far Infrared Rays are invisible waves of energy
They have the ability to penetrate all layers of the infant body,
penetrating into the inner-most regions of the tissues, muscles and
bone.
Far Infrared Rays very gently increases blood flow by expanding the
capillaries that carry blood. It also increases oxygenation and
regeneration of the blood.
Far Infrared boosts the immune system, increasing the amount of
white blood cells and killer T-cells.
Far Infrared can also increase the processing enzyme activity in
digestive tract, as well as boost metabolism.

10. Types of heaters
Quartz
A quartz heater is a type of infrared heater. The heating comes from a
heating element encased inside a quartz tube. The element produces a
wavelength of infrared radiation. The quartz protects the heating element and
stops convection heat from escaping.
Far IR Infrared
Infrared radiation is a type of electromagnetic radiation just below the
frequency of visible light. Pretty much everything emits infrared radiation. The
hotter something is, the more infrared it emits. Every molecule also absorbs
infrared at a certain wavelength. When a molecule absorbs infrared energy, it
heats up. The IR rays ,by deep penetration in skin, ensures the growth of
cells by stimulating it.

11. Ceramic Heaters
Ceramic heaters are heaters that generate heat by passing electricity
through heating wires embedded in ceramic plates. The ceramic
coating tend to crack over a period of time and can fall over the baby
causing havoc
Tubular Heater
A tubular heater is designed from metal tubing. There are chances of
heat loss and heat conduction in relative heating methods. compared with
other heating methods like resistance heating , infrared heating. The
heating pipe has higher cost due to metal material .
Types of heaters(Cont’d…….)

12. Benefits of Heater…
QUARTZ
• Instant
Heating
• Cost
efficient
• Far IR
heating
stimulates
skin cells
• Long life
• Does not
crack
CERAMIC
• Takes time
to heat
• Not cost
effective
• No Far IR
heating
• Cracks in
a period of
time
(ceramic
coating)
TUBULAR
• Risk of fire
• High
operating
cost
• Delay in
heating
• No Far IR
heating
Far IR Heating stimulates the cells of the baby by skin penetration and in
turn helps growth of baby

13. A range of Baby friendly equipments
6 Layer security
Introducing nice NeÖtech 2010 series Infant Radian
Warmers
Designed to perfection for your baby

14. nice 2010 series Infant Radiant Warmers
nice 2010 BC
With bed and storage Cabinet
Servo skin, manual mode ,pre-warm and safe mode
APGAR timer
Large LED display
Cabinet for easy Storage
nice 2010 B
With bed and storage tray
Servo skin, manual mode ,pre-warm and safe mode
APGAR timer
Large LED display
nice 2010
Servo skin, manual mode ,pre-warm and safe mode
APGAR Timer
Standalone, Height Adjustable
Large LED display

15. •Micro controller based electronics
•6 Layer security
•Servo Skin , Manual, Pre-warm and Safe mode controls
•Calibration Free temperature probe
•High Intensity Quartz Heating element for effective radiation
•Halogen Observational Lamp
•Parabolic reflector for uniform heating
•Memory Backup restores previously entered data in case of
power failure
•Comprehensive alarms and safety cut off
•Instant warming and uniform heating
•Far IR heater ensures instant warming
•Automatic safety heater cutoff at 39 °C at any mode
•Apgar Timer
Features

16. How to operate?
 Control Panel Operation
 Operating Modes
 Alarms
 Heater Module
 Bed Platform Operation
 Side Panel Operation
 X-ray procedure

17. Control Panel Operation
1 Skin Temperature Display 1
5
Manual ModeIndicator
2 Sensor Failure Indicator 1
6
Skin Mode Indicator
3 Heater Failure Indicator 1
7
Pre Warm Mode Indicator
4 System Failure Indicator 1
8
Increase Key
5 PowerFailure Indicator 1
9
Mute Key
6 Skin Temperature > 39°C
Indicator
2
0
Heater OutputIndicator
7 Lamp Indicator 2
1
Set
Temperature/Manual/APGAR
Timer
8 Lock Key 2
2
APGAR Timer Indicator
9 Lock Indicator 2
3
Mute ON Indicator
1
0
Lamp Key 2
4
Manual Timer Indicator
1
1
APGAR Kay 2
5
Skin Temperature Low
Indicator
1
2
Decrease Key 2
6
Skin Temperature High
Indicator
1
3
Mode Key 2
7
Alarm Indicator
1
4
Safe Mode Indicator

18. Operating Modes
Manual Mode Operation.
􀂙 The environment temperature in bed platform area is manually control by
varying the percentage of heater output.
􀂙 Manual Timer Setting – Press Mode key and change into Manual Mode
then Press Combination of Mute Key and increase (▲)/Decrease (▼) Key Set
the Manual Timer (1 min – 15 min)
􀂙 % of Heater output Setting – Press increase (▲)/Decrease (▼) touch
switch to adjust the % of Heater Output in 10% increments
􀂙 Manual timer alarm for 15 min will be on , as an indication to monitor the
patient temperature at a time the heater output is reduced.

19. Skin Mode Operation
Note: The skin temperature probe must be properly attached
before choosing Skin mode operation.
􀂙 The user must select a Skin control temperature (Set required
Temperature) when the Infant Radiant Warmer is used in the Skin
mode.
􀂙 How to set temperature in skin mode?
The Skin control temperature is adjusted by pressing the increase
(▲) and decrease (▼) switches. The temperature can be adjusted
from 32°C to 38°C.
APGAR Timer: The APGAR display indicates the APGAR timer
select in the APGAR Mode.
Operating Modes(cont’d…)

20. Operating Modes(cont’d…)
Pre-Warm Mode
•Used to heat the mattress surface before placing the baby ,thus eliminating
heat loss by conduction
•Heater output at 100% for a period of 5 mins.
•Uniform heating of the mattress surface ,thereafter reducing the
heater output to 30% (AFTER 5 MINS)
Safe Mode
•Servo controlled Heater output at 40% maximum
• Audio Alarm free mode
•Maintains a safe ambient temperature when the baby is unattended
Note: All the above mentioned modes can only be accessible when
the keypad lock is off condition.

21. Alarms
Skin Probe Failure Alarm: Active in skin mode
When probe is disconnected from console
Skin Temperature High :Active in the skin mode of operation.
When infant temp greater than set temp(+1°C)
Skin Temperature Low::Active in the skin mode of operation.
When infant temp less than set temp(-1°C)
Manual Timer Alarm: The manual timer alarm activates in the manual mode of operation
when the
therapy time set has elapsed.(15 mins by default)
Heater Fail Alarm: The Heater failure alarm activates if the heater fails in any mode of
operation.
System Failure Alarm: The system failure alarm activates in any mode of operation, if any
components are defect.
Power Failure Alarm: The power failure alarm activates in any mode of operation if the
power cable gets disconnected or when there is no AC main power
Thermal Cut-off Alarm: When temp exceeds 39°C in any mode. The heater deactivates
and the patient temperature displays “o.t”.

22. Heater Module
Parabolic
design
Even
Distribution of
heat over bed
surface
Extensive
safety
measures(6
Layer safety
for thermal
cut- off)
Far IR
heating
ensures
stimulation of
cells for
growth
The parabolic design of the heater module ensures that the Far IR radiant
energy is distributed very evenly over the bed surface .The IR rays ,by deep
penetration in skin, ensures the growth of cells by stimulating it.
With 6 layer safety measures , the chances of hypo and hyperthermia is
ruled out.
 The heater also comes with a thermostat temperature control for enhanced
protection.

23. Bed Platform Operation
•The bed platform tilts for Trendelenburg and Fowler positioning capabilities.
Rotate the knob to adjust tilts.
• Caution: Make sure that an addition support is provided to hold baby firmly
when the bed is in tilted position.

24. Side Panel Operation
•To open and lower the side panel of the bed, lift latch and swing the acrylic
panel down.
• To raise a side panel, swing it to the upright Position and engage the latch
tightly .

25. X-ray Procedure
•The X-ray cassette may be placed in the
slot under the bed platform or in the X-ray
cassette tray, if installed.
•The heater housing rotates to the left or right
for X-ray procedures.
• The X-ray cassette tray facilitates X-ray
procedures while patients occupy the Infant
Radiant Warmer bed.
•An X-ray cassette can be placed on the tray and slid into the cavity
below the bed without disturbing the patient.

26. Comparison of nice 2010 Infant Radiant Warmers
nice 2010 BC nice 2010 B nice 2010
Skin Mode Y Y Y
Manual Mode Y Y Y
Safe Mode Y Y Y
Pre-warm Mode Y Y Y
X Ray Facility Y Y N
Bed Y Y N
Pivoting Warmer Module
Y Y Y
Apgar Timer Y Y Y
Height Adjustment N N Y
*Optional Accessories: Shelf, O2 Flow meter, O2 Driven slow suction, Ambu bag,
Ceramic Heater, O2 Cylinder Mounting Provision

27. How nice Infant Radiant Warmers fare over
competitors?
nice 2010
series
warmers
User-friendly:
easy to access all
parameters
Long life : quartz
heater has a long
life compared to
other heaters
6 Layer safety for
the protection of
infant from
burning .
Other
company
warmers
Not user friendly:
needs extensive
training to operate
Other type of
heaters have
short life span of
2 years
Only 2 layer of
safety

28. 6 Layer Safety Features
Alarms if infant temperature greater or less than Set Temperature
Thermal cut off if infant temperature exceeds 39 °C
Heater output reduces to 30 % after 15 mins in Manual mode
Heater output reduces to 30% if electronics senses , no variable
feedback
Heater output reduces to 30% if there is a sudden decrease in
temperature when the probe comes off from the baby
Thermostat controlled ,in an event of breakdown if temp exceeds
permissible limits- component, relay, micro-controller failure

29. TROUBLESHOOTING
AND
MAINTENANCE

30. Cleaning Procedure
1. Clean the Skin Temperature Probe by gently wiping with a soft
damp cloth containing detergent of disinfecting solutions.
2. Clean the exterior of the Infant Radiant Warmer using mild
detergent solution applied with a damp cloth or sponge. Do not
allow liquids to seep into the electrical housing.
3. The mattress, x-ray tray, bed & side panels may be cleaned by
using disinfecting agent safe for use on the material.
Cleaning Solutions for Mattress
Generic Formulations : Maximum concentration level
Hydrogen Peroxide : 6%
Quaternary Compound : 0.5% aqueous solution
Quaternary Ammonium : 0.2%
Lodophors : 50mg/litre

31. Preventive Maintenance
􀂁 Always disinfect and clean the unit and accessories before any maintenance
– even when returning the unit to the supplier for repair.
􀂙 Always disconnect power supply before any maintenance.
􀂙 Use only nice Neotech’s original parts for maintenance.
Warning: Periodically check the insulation and the connection of the cable it
may cause fire because of insulation and short circuits due to aging.
Warning: Don’t misaligned the EMI Shielding and the beads as it may cause
the EMI interference to the equipment
􀂙 Side Panels: visually inspect the panels every day , for any sign of breakages
or loose fit .
􀂙 Temperature measuring system: Measuring system should be checked by
trained service personnel with calibrated test probe every year.
Note: No need of calibration if a new temperature probe is replaced.
􀂙 Bed Up/Down Tilting: To be inspected once in every three months by the
trained technical personnel.
􀂙 Inspection & Maintenance: Yearly by trained Service Personnel.

32. Troubleshooting
General System Failure
System Fault Infant Radiant Warmer
Sl. No Problem Cause Remedy
1 Power failure LED is ON with audio
alarm
Power Failure
Check the unit is Plugged in to Main
supply
Check the mains are switched ON.
Else Contact nice Neotech
2
System Failure LED is ON with
audio alarm
System Failure Contact nice Neotech.
General System Failure

33. System Fault Infant Radiant Warmer
Sl. No Problems Possible Causes and Remedy
1 No Display on the Control Panel
Check A/C Supply Voltage
Check if Power Cord is disconnected
Check Fuse in the Rear side of Pillar
Contact nice Neotech
2 No Heater Output
Check Link cord connected between Control Module to
Heater Module
Set Temperature may be less than Actual Temperature
Check Heater Connection
Contact nice Neotech
3 Equipment Working But Observation Lamp & Heater output not working
Check Link cord connected between Control Module to
Heater Module
Check Fuse in the Rear side of Heater Module
Check Transformer Voltage - 12V AC
Replace Lamp
4 Equipment not give the Audio Alarm
Check the Temperature it may near to the Set
temperature
Check Mute ON.
Contact nice Neotech
5 Patient Temperature Display shows “S-O”
with Continuous Alarm
(S-O: Sensor Open)
Check if skin Probe is Disconnected from the
Equipment.
If skin probe is defective, replace new probe
Contact nice Neotech
7 Display shows H - F (H-F: Heater Failure)
Check Link cord connected between Control Module to
Heater Module
Check Heater Connection
Contact nice Neotech
8
Display Show O – t
(O-t: Over Temperature ie. Temp. > 39 ° C)
Check Environment Temperature above 39° C
Check Infant Fever
9 Continuous Skin Temperature High Alarm
Check Patient Temperature is 1°C above Set
Temperature
Check Environment Temperature is 1°C above Set
Temperature
Contact nice Neotech
10 Continuous Skin Temperature Low Alarm Check Patient Temperature is 1°C below Set

34. Temperature
Probe may be wet.
Contact nice Neotech
13 Temperature over Mattress does not rise
Check Low ambient Temperature it should be
approximately (22-30°C)
Check draft around air conditioning outlet
Check Percentage Heater Output is Set at low in Manual
Mode
Low Supply Voltage
14 Temperature over Mattress rises excessively
Check direct Sun light, Heating Device or other Heat
Source
Percentage Heater Output is Set at High in Manual
Mode
15 Temperature over Mattress dose not stabilize
Check unstable ambient temperature (should be 22-
30°C)
Check for Strong Air conditioning draft
16
Temperature Display does not display Infant's
Temperature accurately
Probe Thermal Sensitive Portion attached improperly
Check Thermal Sensitive Portion of Probe covered
improperly
17
Baby skin Temperature not correlate with
display Temperature
Check sensitive portion of the Probe is fixed with baby
skin properly.
Check Probe is fixed to the lower abdomen of baby
18 Heater output is off after some time in manual mode
Check Manual Timer Time. Can be set 2 to 30 minutes
Check the Heater output is off after set time
If Heater output is off before set time contact nice
Neotech
19 In Skin Mode Baby getting over heat but
equipment gives Low Temperature alarm
Check the probe is intact with lower abdomen of baby
Check the probe is removed and kept away
Check the Set Temperature is high
Check the Set Heater output is high ( Manual Mode)
System Fault Infant Radiant Warmer(Cont’d…)

35. Cautions
 Use cleaning solution sparingly on a cloth when cleaning the Infant
Radiant Warmer.
 Do not saturate the unit - excessive solution causes damage to
internal components.
 Do not autoclave or gas sterilize the skin temperature probe. Do not
immerse the probe in liquid cleaner. Avoid placing excessive strain
on the probe lead. Do not pull on the probe lead. These precautions
will help avoid damage to the probe.
 Do not autoclave or gas sterilize the mattress.
 Only competent individuals trained in the repair of this equipment
should attempt to service it as detailed in the service manual. The
Service Manual provides detailed information solely for use by
individuals having proper knowledge, tools and test equipment, and
for service representatives trained by nice Neotech .
 Isolation from the supply mains is Detachable Power cord provided
 Use of nonstandard components: Consult the manufacturer for
repair and replacement of components. Use of incorrect component
can adversely affect Safety, performance and/or damage the
equipment performance

36. Certifications and Approvals
Electrical Safety : IEC 60601-1
: IEC 60601-1-4
Particular product : IEC 60601-2-21
EMC Safety : IEC 60601-1-2

37. Contact Us
nice Neotech Medical Systems Private Limited
No 85, Krishna Industrial Estate
Mettukuppam, Vannagaram,
Chennai – 600095, Tamil Nadu,
INDIA
Tel: +91-44-24762594,24764608.
Fax: +91-44-24766920
Web: www.niceneotech.com.
E-mail: info@niceneotech.com , marketing@niceneotech.com
Overseas Enquiry: overseas@niceneotech.com
Toll Free : +91-1800-425-2594.