HC Series Grinding Mill widely applied in mineral grinding processing of metallurgy, construction material, chemical industry and mine fields, and is widely used to grind minerals with Mohs hardness below 7 and moisture below 6%, such as limestone, calcite, active carbon, talc, dolomite, titanium dioxide, quartz stone, bauxite, marble, feldspar, barite, fluorite, gypsum, titanium iron ore, phosphate rock, argil, graphite, kaolin, diabase, coal gangue, wollastonite, slaked lime, zircon sand, bentonite, manganese, etc. The fineness can be adjusted from 0.18mm to 0.038mm (80-400 mesh).
3. Guilin Hongcheng Mining Equipment Manufacture Co.,Ltd. Is a professional supplier of powder processing
integrated solution. It is a leading enterprise of powder processing equipment in China, which is specialized in
supplying design, equipments, installations and commissioning service for powder processing production line.
Hongcheng, certificated by ISO9001:2008 international quality management system, is a national high-tech
enterprise with more than 30 patents and import and export authority. Depending on the producing and
researching experiences of decades, Guilin Hongcheng has become a major powder processing equipment
manufacturer and export base.
Our factory is organized by three production bases and a researching center. The main production center locates
in Yangtang Industrial Park, Xicheng Economic Development Zone, Guilin, spread an area of 170,000m2. Main
products that Guilin Hongcheng manufactured are: R-serial pendulum Mill, HCH serial Ultra-fine Mill, HC serial
vertical pendulum Mill, HCQ serial Mill, HC1700 super-large scale vertical pendulum Mill, HC2000 super-large Mill,
HLM vertical Mill and HLMX Ultra-fine vertical Mill. HC serial vertical pendulum Mill is the core product which
gained patents. HLM serial Vertical Mill is a high efficiency and energy-saving large scale powder processing
equipment developed by decades of painstaking research. Our operation principle is to bring the maximum value
for customers by quality and service. We are not only producing and selling productions, more important for us is
researching, program designing, delivering, installing, after sell service, parts supplying, skill training, etc. We are
able to offer you the best solution and service, and help you to get a brilliant success.
At present, Hongcheng is entitled to a high fame in domestic processing field. No matter in infrastructure
construction, mineral deep processing, solid waste cyclic utilization, energy saving, emission reduction,
environmental protection, or metallurgy, construction material, chemical engineering, power plant fields, we can
see the brand of Hongcheng; no matter in large-scale non-metallic powder processing, coarse whiting processing,
desulfuration limestone processing or petroleum coke powder processing fields, Hongcheng is the first choice of
customers. Our vision is to establish a global brand for China, we are holding the principle of “Quality is the
basement of survival, service is the source of development”. The facilities and service of Guilin Hongcheng have
been spread to Vietnam, Laos, Malaysia, Indonesia, Sultan, Africa, Brazil, Chile, Russia, Philippines, Egypt, etc.
COMPANY PROFILE
4. Technological Innovations Achievement
Number of R&D technical staff accounted for 13.37% of all, entitled as" State-level high-tech
enterprise”.
12 research and development projects in the past 3 years, scientific and technological
achievements conversion average for more than 4 annual, sales of new products through the
conversion of technological achievements can achieve three or more every year.
The company has 25 patents, including 1 invention patent, 1 applications for invention patent,
patent achievements conversion rate is 100%.
“HC1700 large-scale vertical pendulum grinding mill "win the secondary prize of “Guilin Scientific
and Technological Progress ”.
National Innovation Fund Project—HCM Double Cyclone Powder Impact Mill verified for
acceptance.
“HC2000 large-scale vertical pendulum grinding mill ”and“HCX Composite channel pendulum
superfine powder grinding mill”are included in the Autonomous Region Committee for the 2012
technical innovation project.
“Remote intelligent monitoring HC2000 Large mine mill“ is included in Autonomous Region
Committee for the 2012 billion yuan industry research cooperation projects.
Become Enterprise Technology Center in Guangxi, Guangxi manufacturing model enterprise for
informatization, included as cultivation object of Autonomous Region Committee researching and
development center in 2012.
5. Strategy Cooperation
China Institute of Coal Science——Energy saving industrial boiler and coal chemical project
(Qilianta Coal Mine)
Chinese Academy of Sciences——Sulfide bed project(CITIC manganese industry)
China University of Mining and Technology——Non-metallic mineral powder modification project
China Calcium Carbonate Association——National Industrial Demonstration County (Rectification
of Huzhou calcium carbonate industry)
Xi'an Transportation University——Remote Monitoring Project(Changxin Jinding mining)
Guilin University of Electronic Technology——Machine hand packaging project(under R&D)
China Casting Association——R&D of abrasion castings project
China Non-metallic Minerals Industry Association, China Association of the manganese, China
Coating Association, China Building Materials Association, Chinese Productivity Promotion
Center, China Association for science and technology, China Forest Products Industry
Association……
Guilin Hongcheng mill equipment were selected for more than 85% of the new launched projects in
manganese, calcium carbonate and other industries.
6. HC Series Roller Mill
Upgrade New Version for Traditional Raymond Mill
7. Current Application State of Traditional Raymond mill
Currently, Raymond Mill(Roller) is mainly used for dry grinding of Non-metallic
materials (80-600 mesh)
The original system configuration of these devices caused following deficiencies:
1. low efficiency, high energy consumption, high dust emissions.
2. Strong vibration for main frame, loud noise, high maintenance rate.
3. Temperature in main frame cavity is hard to control, hard to discharge impurities.
Technical problems that has to be solved for non-
metallic material processing - how to achieve high
efficiency and energy saving environmentally friendly
production?
8. HC Series Roller Mill
HC-series Grinding Mill is a kind of newly-designed roller-type
mill, featuring in higher efficiency, lower power consumption
and much better performance than traditional raymond mill.
This mill is widely used to grind any non-metallic minerals
with Mohs hardness below 7 and moisture below 6%, such as
limestone, calcite, activated carbon, talc, dolomite, titanium
dioxide, quartz, bauxite, marble, feldspar, barite, fluorite,
gypsum, ilmenite, phosphorite, clay, graphite, kaolin, diabase,
gangue, wollastonite, quick lime, silicon carbide,bentonite,
manganese. The fineness can be adjusted from 0.18mm(80
mesh) to 0.022mm(600 mesh), whose range is much wider
than that of traditional Raymond mill. HC1700 grinding mill is
the first large Raymond mill in China, comparing to the
traditional mill (5R Raymond mill), its capacity is about 2.5 to
4 times higher. The output of the largest model-HC3000 can
reach 90t/h, which is specially suitable for large scale powder-
making projects for effectively increasing the production
capacity while reducing the power consumption.
9. Technology Updating of HC Serial Pendulum Grinding Mill
Updating --- R serial → HC1300 → HC1500 → HC1700 → HC1900 → HC2000 → HC3000
HC Series Large-scale Pendulum Grinding Mill fills the gaps of domestic large-scale
pendulum grinding mill market and solves the problem of large-scale production
which traditional Raymond Mill can not achieve. It expands the application fields of
Pendulum Grinding mill and greatly improves the equipment performance both in
production and the unit energy consumption.
10. 10 Innovation Patents for HC Series Pendulum Grinding Mill
1. Vertical Pendulum Roller Device.
2. Maintenance-free Roller Assembly.
3. Forced Turbine Classifier.
4. Inblock Cast Foundation Base.
5. New Rotation Support Structure
6. Double Belt Driving Device
7. Pure Pulse Collection Systems.
8. Shock Absorber Device for Main Frame Foundation
9. PLC Frequency Conversion Control System.
10. Remote Intelligent Control System.
Technological Revolution in Pendulum Grinding Mill Industry
New Generation of Traditional Raymond Mill
12. Technical Advantages
HC series grinding mill is researched and designed independently by our R&D experts. It is
distinctly superior in the following respects.
1. Unique swag style (Patent No: CN200720081221.1)
The traditional R-type roller device caused a skew angle between roller and ring working
platform because the rollers are placed horizontally and roller device turn up when swag.
And the HC1700 applied vertical roller device which throw away horizontal when swag. The
centrifugal force of vertical device increased almost 35% when the central rollers of main
mill swag so that the roller compaction and crush power are strength. Otherwise, it is better
for powder crush and average wearing of grinding area because of the horizontal touch of
roller and ring of the vertical device. At the end, to extend the service life of wearing parts.
Traditional R-type
roller device
vertical roller
device
13. Technical Advantages
2. Turbine Classifying System(Patent
No.ZL201030143470.6)
The classifying system uses the turbine
classifier featuring in higher production
capacity and more efficient classifying,
which can make powder with a precise
fineness ranging enlarge from 80-
200mesh to 80-400mesh and ensure
the highest passing rate.
3. Multi-layer blocking sealing structure (Patent No.CN200820113450.1)
The roll assembly works in high dust concentration environment. The lamination sealing of
the traditional R type roller mill sealed bearings unreliable. While this proposal adopted
with multi-layer blocking sealing structure which combined with the floating oil sealing
technology, screw seals and skeleton seals to prevent dust going into the bearing. Keep the
roll assembly working smoothly and durable. Vastly short the maintenance time.The
traditional R type roller millneeds lubrication each days. The newly designed sealing
structure ensures the roller assembly works continuously for 500-800 hrs without
lubrication.
14. Technical Advantages
4. PLC Full Frequency Converting Control System:
By increasing the cost of investment, the motors of main mill, blower, classifier and belt
feeder can all be selected to have frequency converting control. The PLC interface operation
can realize full-automatic producing and unmanned operation, which will largely reduce the
labor cost. The PLC system will simplified the control and operation mode, serial operating
can be realized, control speed can also be improved. Moreover, the alternating-current
converter has outstanding adjust performance and energy saving effect. The frequency
converter of the facility plays an important role in facility control, energy saving and easy
maintenance.
15. Technical Advantages
5. Small vibration amplitude, lower error rate to ensure the sustainable produce: the
vibration reduce shaft sleeve is made of special rubber and wearable material which is
alternative according to client’s actual demand, not only to isolate the vibration caused by
equipment running efficiently, but also extend service life and avoid frequent maintenance,
ensuring persistence processing. It is a breakthrough in addressing the issue of short
service life and frequency maintenance of traditional Raymond mill.
6. The Inblock Casting Foundation Base: it provides solid structure and perfect vibration
absorption, which can avoid crack or damage of other components caused by the long-
time vibration and separate structure between air-return box and base. Improve the
machine reliability and durability.
Welding
Foundation Base
Inblock Cast
Foundation Base
16. Technical Advantages
7 . Pulse Collecting System
(Patent No. CN200820113691.6):
Pulse Collector applied oil and
water proofing folded filter-bag:
(1) filter efficiency can be more
than 99.9%, dust concentration
around air outlet<30mg/m3,
preceded national standard; (2)
long service life of filter-bags; (3)
larger filter area and lower filter
velocity than same volume
collector; (4) compact structure,
small volume, low floor space; (5)
auto exhausting with pulse-jet.
17. Technical parameter of HC series grinding mill
Model HC1000 HC1300 HC1500 HC1700 HC1900 HC2000 HC2500 HC3000
Roller
Number
3 4 4 5 5 5 6 6
Ring
Diameter(m
m)
970 1270 1500 1700 1900 2000 2500 3000
Max.
Feeding
Size(mm)
≤25 ≤30 ≤30 ≤30 ≤40 ≤40 ≤40 ≤40
Fineness(m
m)
0.022-
0.18
0.038-
0.18
0.038~0.1
8
0.038~0.
18
0.038~0.
18
0.038~0.
18
0.038-
0.18
0.038~0.
18
Capacity(t/h
)
1-5.5 2-9 3-13 6-25 10-30 15-45 30-60 45-90
Total
Power(kw)
85/101 165/180 242 342 455 670 1210 1732
1. HC1000 to HC1700 can be equipped Hongcheng patented vertical pendulum structure.
2. The actual production depends on the materials being processing. The specification above is for reference.
18. Best Seller–HC2000 Pendulum Grinding Mill
HC2000 grinding mill is a large pendulum
roller mill developed by our engineer on the
basis of HC1700 grinding mill. With 5
patents, HC2000 grinding mill is widely
used to grind almost any non-metallic
minerals with Moh’s hardness below 7 and
moisture below 10%, such as kaolin,
calcite, marble, talc, manganese, ceramic,
etc. The fineness can be adjusted from
0.18mm(80 mesh) to 0.038mm (400
mesh). HC2000 grinding mill not only live
up to the national industrial policy and
meet the needs of mass production, but
also fills the gap of large-size mill in the
mill industry. It plays a leading role in
grinding technology, production capacity
and power consumption per ton.
With a production capacity of 45T/H,
HC2000 grinding mill can replace many
kinds of mills, especially suitable for large-
scale powder-making industry such as
desulfurization and manganese.
20. NO. Environmental indicators HC1700 HC2000
01 System noise ≤85db ≤80db
02 Dust emission ≤50mg/m³ ≤30mg/m³
HC2000、HC1700 grinding mill system noise and dust
emission indicators
21. HC2000 Grinding Mill typical cases
Application of HC2000 Large
Pendulum Grinding in Zhejiang
Changxing Huaxing calcium Co.,
Ltd.:
Material: Limestone
Fineness: 250mesh D95
Capacity: 38-40t/h
The capacity of original
Raymond Mill(5R) is only 6-7 t / h
The average service life of abrasion parts is 5000-6500 hours which is two times longer
comparing to the original 5R Raymond mill.
By comparison with other manufacturers of similar equipment, comparative data shows that
HC2000 is efficient and productive, energy saving large grinding Mill.
22. Equipment Name HC2000 5R4119 Contrast
Set NO 1 6 -5
Product fineness range(mesh) 80-400 100-400 0
Capacity(t/h) 38-42 36-42 0
Space area(m²) About 270 About 432 -162
Total power of system(kw) 670 1170(195*6) -500
Collection method Pulse collector cyclone and bag
collection
---
noise(dB) 85 105 -20
Dust emission of workshop <50mg/m³ >100mg/m³ -50
Electricity consumption(kw.h/t) ≈13.5(250meshD97) ≈24.5(250meshD97) -11
Maintenance amount of system
equipment
low high ---
Automatic degree high low ---
Environmental friendly good bad ---
Operation data comparison of a single HC2000 and 6 sets
of 5R4119
23. HC1700/2000 operation cost and investment cost
Comparing with traditional 5R equipment (based on
capacity of 400,000t per year)
Capacity of 400,000t per year under same circumstances, calcium carbonate of
Mohr's hardness about 3-4, end product fineness 250 mesh D97:
Model
Designed
set NO
Capacity
per set Total power
Actual
efficiency
Power
consumption
per ton
HC2000 2 sets 40t/h 670KW 80% 13.5kwh/t
HC1700 5sets 18t/h 360KW 80% 17.5kwh/t
5R4119 12sets 6.5t/h 195KW 90% 24.5kwh/t
1、Unit Electricity Consumption Cost
24. 2、5R、HC1700、HC2000 operation and investment cost comparison
NO Model Designe
d set
NO.
Energy
consumpt
ion per
ton(kwh/
t)
Electricit
y fee(
Yuan/k
wh)
Power
Consumption for
400,000 t(
million yuan)
Maintenance fee(
yuan/year)average
of first 3 years
A HC2000 2sets 13.5 0.8 4.32 M 30,000*2=6
B HC1700 5sets 17.5 0.8 5.60 M 25,000*5=12.5
C 5R4119 12sets 24.5 0.8 7.84 M 20,000*12=24
Contrast data
A-B A-C A-B A-C A-B A-C A-B A-C A-B A-C
-3sets -5kwh/t 0 -1,280,000yuan -65,000yuan/year
-10sets -10kwh/t 0 -3,400,000yuan -180,000yuan/year
Conclusion: HC2000 can save a total of 1.28 million than HC1700, compared with 5R can
save a total of 3.52 million.
25. From the first HC1700 manufactured in 2007, its market share of the same
type is as high as 90%; while from the first HC2000 manufactured in 2011, its
market share is as high as 95%.
HC2000 Changxing case, the highest capacity can reach up to 42t/h, especially
suitable for large-scale production of calcium carbonate powder processing
enterprises. HC series grinding mill is a type of high efficiency, energy saving
and environmental friendly grinding machine compare with R-serial Raymond
Mill no matter in unit energy consumption, labor cost or environmental
indicators.
HC2000 is the most competitive product of HC series grinding mill, and has
gained good application in non-metallic powder processing market.
Conclusion
26.
27.
28.
29. Corporate culture is the soul and the potential productivity of the enterprise, is
strategic movement of build the core competitiveness of enterprises. Guilin Hong
Cheng has formed its own unique and rich content corporate culture during the
long-term development. Hongcheng will continue put cultural strategy as one of the
important development strategies; make excellent corporate culture become an
inexhaustible motive force for enterprise development.
Our Vision: To create an international brand for China.
Our Mission: Technological innovation; Serving the Society.
Our Management Philosophy: Quality achieves the future.
Our Core Value: Create value for customer, let us achieves the
future.
Culture of Guilin Hongcheng
30. Thank You
Guilin Hongcheng Mining
Equipment Manufacture
Co.Ltd.
Pleass Contact:
Foreign Trade Dept .:
Jan(86)773-3568321 13978384371
Fax:(86)773-3568987
Email: billy@hcmilling.com
Add: Yangtang Industrial Park, Xicheng Economic Development Zone,Guilin
City, Guangxi Province, China, 541199