1. Industrial Cooling Tower Mfg. Co. An ISO 9001-2008
Off Add-A-81,Jagat puri ,Mandoli Road ,Delhi-110093 Certified Co.
Ph:91-11-22311837-22583158 Fax -91-11-22583158
E mail –sales@industrialcooling.asia
Email-industrialcoolingtower@live.com
Web-www.industrialcooling.asia
To, Date:_2014_________
M/s_________________
_____________________
_____________________
Kind Attn : Mr. ____________________
Sub : Request for registration as approved vendors for supply
of Cooling Towers and their Spares,
Dear Sir,
We take pleasure in introducing ourselves a manufactures of all type of cooling
Towers Like FRP/WOODEN/RCC Cooling Towers and components including mechanical
spares like Gear boxes, Drive shafts, Fans and Timber components , PVC Fills ,PVC V Bar
etc.
M/s Industrial Cooling Tower MFG. Co , (Delhi) has modern internal facilities for
manufacturing & testing of cooling tower components.

2. M/s Industrial Cooling Tower Mfg.Co. has an Experienced Team of professionals,
The Director, Mr.Jitendra Sharma has worked with M/s Paharpur Cooling Tower for
around 25 Years. During his service with Paharpur Cooling Towers, he was involved in the
manufacturing of all type of Gear Boxes (all ratos), Drive Shafts (all series), Flow Control
Valves (all sizes), Fans (all sizes), Fan Stacks/FRP Fan Cylinders and their components.
We offer:
1) Dynamically balanced drive shaft & its spares in GI or SS-304 construction.
2) Flow control valve (of all sizes ) & its spares.
3) High Efficiency Power Saving FRP Fans (of all sizes) and their spares.
4) FRP fan cylinder (low ventury & high ventury).
5) FRP/Aluminium fans & their spares like hub cover, clamps, through bolts etc.
Static balancing of fan assemblies (of all diameters)is done.
6) ductile iron. Fan balade clamp assemblies.
7) Helical gear match set (of all ratios; in all series)used with Marley type gear boxes.
8) Spiral bevel gear match set (of all ratio; in all series) used with Marley type gear
boxes.
9) Complete Overhauling of Gear Boxes and their load testing.
10) PVC spray nozzles (all type).
11) PVC ‘V’ bar and PVC film fills.

3. 12) Bench tie,tie clip, ‘D’ lock, SS-304 Wire Fill support Grids, ACB eliminators and
‘U’ channels.
13) All type of timber, plywood and asbestos items used in cooling towers.
14) All gear reducer internals like oil seal, ‘O’ rings, ring gear hub, waterslinger,
Grommets.
15) Supply of new cooling towers (Timber, FRP & RCC).
16) Annal Maintenance Contracts of Mechanicals of Cooling Tower.
17) Repairing and overhauling Contracts of Timber structure of Cooling Towers.
Compared to our quality, the prices are reasonable. We would like to
emphasize that our services are punctual and the supply is as per agreement .
The necessary consultancy regarding maintenance and services of any type of
cooling tower is provided at token charges.
We prefer to have direct interaction with you, thus avoiding the usual
hassles faced while dealing with the dealers. Thus, there will be an efficient
time management.
We warranty our spares and other supplied items for workmanship and
excellence. Our spares have 100% interchangeability against the existing
running machinery.

4. We anticipate your kind attention and valuable enquires so that we can prove
overselve.
Always promising you of the best services in the field.
Regards:
Industrial Cooling Tower Mfg.co.
Gaurav Sharma -9810112365