This document provides information on several SMT machines including terminal inserters, wave solder machines, screen printers, pick and place machines, and a full LED lamp SMT line. The terminal inserter can insert leads up to 300mm wide at speeds of up to 1500mm/min. The wave solder machines come in various sizes to accommodate different PCB sizes and have adjustable conveyor heights. The screen printers have automatic stencil clamping and positioning and can print on PCBs up to 400x340mm in size. The pick and place machines can place up to 36 components per second and are suitable for higher volume production. An entire low-cost LED lamp SMT line is also presented that could produce 40,
9. • FEATURES
• ○ Complete for the lead free process
• ○ Adopt instrument control System and closed loop
control for heating source of each zone.
• ○ Temperature control adopt circulation hot air heating
mode for each zone;
• ○ Closed loop control for conveyor system, can go along
steadily stepless rate-adjusting;
• ○ With over heating alarm function;
GENERAL
Machine Dimension 3600x720x1250
Weight Approx.420KG
HEATING ZONE
Number of Heating Zones Top 6/Bottom 6
Length of Heating Zones 2300mm
Heating Mode Circulation hot air
Number of Coling Zone 1 cooling Fan
CONVEYOR SYSTEM
Max. Width of PCB 300mm
Conveyor Direction L→R
Conveyor Height 900+/-20mm
PCB Transmission Mode Mesh
Conveyor Speed 0-1500mm/min
CONTROL SYSTEM
Power Supply 5 Wire 3 phase, 380V 50/60HZ
Power for Warm Up 15KW
Power Consumption 5KW
Warming Time 15 Min
Temperature Control Method PID Close Loop Control + SSR Driving
Abnormal Alarm Abnormal Temperature (Extra-high temp).
10. Printing area 320×800mm
Frame size 370×1000mm
PCB size 300×750mm
Scraper speed 0-100mm/sec
PCB thickness 0.2-2.0mm
Printing position fixed PCB Outer Or Pin Positioning
Bedplate fine-tuning Front/back ±10mmR/L ±10mm
Printing precision ±0.02mm
Machines repeat precision ±0.02mm
Minimum distance 0.35mm
Air compressor 4-6kgf/cm2
Power
Single-
phase220V,50/60Hz,100W
Size L1100×W900×Hl650mm
Weight About550kg
11. Contrast figure before and after cleaning
Recommand:S1688 Stencil Cleaner Machine
·All pneumatic, no safe hidden trouble, avoid
fire
·Easy to operate, the price is cheap
·Clean the stencil absolutely
17. MODEL S-350C
PCB Width 50-350mm (Option: Width Max.300; 400; 450mm)
Conveyor Height 900±20mm (Option: 950 ±20mm)
PCB Direction L→R (Or R→L)
Conveyor Speed 0-10000mm/min
Power Supply Single Phase 220V, 50/60Hz 80W
Rail Length 0.5m, 0.8m, 1m, 1.2m, 1.5m, 2.0m (or special size)
Control System Relay Board (2 Sensor without Stopper) Option: PLC
Foot Switch Standard
Lighting Option
SOP Rack Option
Communication Plug SMEMA Signal
Dimension Rail Length*794*910mm (L*W*H)
Net Weight 75KG
Buffer Conveyor S-350C
18. MODEL SULD-400B SULD-400C SULD-400D
Dimension (L*W*H)
2440*726*1250mm
3015*806*1250mm
3515*866*1250mm
PCB Size
330*(60-250)mm
400*(60-330)mm
525*(60-400)mm
Conveyor Height 900±20mm
PCB Direction L→R (Or R→L Option)
Pitch Selective 10, 20, 30, 40, 50mm
Magazine Size
(L*W*H)
350*320*565mm
460*400*565mm
535*460*570mm
Power Supply Single Phase 220V, 50/60Hz
Power Consumption 180W
Air Supply 5-7kg/cm2
Communication Plug SMEMA Signal
Net Weight 220KG 250KG 280KG
Model SLD-400B SLD-400C SLD-400D
Dimension (L*W*H)
1646*726*1250mm
2071*806*1250mm
2359*866*1250mm
PCB Size
330*(60-250)mm
400*(60-330)mm
525*(60-400)mm
Conveyor Height 900±20mm
PCB Direction L→R (Or R→L Option)
Pitch Selective 10, 20, 30, 40, 50mm
Magazine Size (L*W*H)
350*320*565mm
460*400*565mm
535*460*570mm
Power Supply Single Phase 220V 50/60Hz
Power Consumption 180W
Air Supply 5-7kg/cm2
Communication Plug SMEMA Signal
Net Weight 200KG 230KG 260KG
19. Stencil Frames 470 X 380-737*737mm
Stencil Clamping Air Valve
Stencil Positioning Automatic
PCB Size 50*50-400 X 340mm
PCB Thickness 0.4-5.0mm
Transport Direction Left – Right, Right -Left
Transport Speed Stepper Motor, 100-1500mm/s Program
Control
PCB weight 0-3KG
Transport Height 900+-40mm
Printing Accuracy ±0.025mm
Repeating Accuracy ±0.01mm
Air Source 4.5-6kg
Power Supply Single Phase 220V, 50/60Hz 100W
Control Method PC Control
Operating System Windows XP
Dimension L 1140 X W 1360 X H l500mm
Machine Weight Approx: 1000kg
Automatic Screen Printer SP-1008
20.
21.
22. Dimension :2000(L)×1150(W)×1400(H)mm
PCB length : Max. 1200 mm
PCB width :Max.325mm
Accuracy : 0.1mm
Movement accuracy : 0.02mm
Speed : 35000 CPH
Power supply: AC220V , 50HZ
Power consumption : 2.0KW
Air pressure:0.55MPA
Positing:Visual identification mark
Weight :Approx.1250KG
Pick And Place S-1200-SV
23. 1.Actual Speed: 120K CPH
(one pick & place cycle: 1 sec)
2. 36 nozzles: Gang pick/Gang Place
3.2 Placement head: Linear motor
4.Smart Feeder: 100% compatible
NXT
5.Cross platform: PCB size 1.2x0.3m
One line equipments Investment: $120k
40K T8 LED tubes/ Day
SMT Assembly earning $0.05 /Tube
Profit: $50K per month