FORESIGHT ON MANUFACTURING MEDICAL LABORATORY EQUIPMENT FOR CENTURY AUTOMATION Global health automation cut across each edge and every parcel of the medical industry. The healthcare system was designed with advanced readiness and clear foresight, in order to tackle emerging and reemerging public health scenarios. Foresight on manufacturing medical laboratory equipment for century automation, serve as a compass for global health emergency; healthcare structures and facility building; clinical laboratory automation; medical discovery; molecular diagnostics; molecular medicine; molecular engineering; research work and innovative project; creativity and problem solving; quality healthcare provision; supply chain and logistics; quality assurance and control; forensic sciences; industrial and company manufacturing design. Commonwealth: sponsored and funded by governmental, military and International partnerships, networking globally.

1. BY MILITARY SCIENTIST RAKAU FARMASUM FELIX BILLY
IN REGARD TO OPERATION WARP SPEED
OCTOBER 29, 2020
FORESIGHT ON MANUFACTURING MEDICAL
LABORATORY EQUIPMENT- FOR CENTURY
AUTOMATION

2. INTRODUCTION






Medical laboratory automation of the 21st century
demonstrate each and every second into the future.
It stretches back in time as labs took their tentative steps
towards advancement in automation.
Driven by the imperatives of greater efficiency, more precision
and round the clock operation are used.
Sophisticated forms of automation are now widely applied in
enhancing medical laboratory productivity.
Medical laboratory device, equipment, test strips and kits are
designed and manufactured based on problem solving.
Including new medical discoveries, design control, quality
assurance, reducing error, accelerating research,
standardising process and improving safety.

3. INTRODUCTION CONT.




The word automation is inspired by the word automatic
which means exercising control without interference.
Automation means getting work done by machines which
can run on their own without continuous monitoring.
Shaping the laboratories of the future address effectively
human computer interaction, which is emerging as the key
challenge in creating a productive and efficient lab of the
future.
The health care system is meant to be programmed with
medical laboratory automated readiness, in order to test
and tackle emerging and remerging infectious diseases.

4. INTODUCTION CONT.






The three key areas that would impact on the laboratory
of the tomorrow include :
The driving forces that shape how workplaces will look
like in the future;
Relevant research themes tackled among team work;
And what the implications are for laboratory automation.
Innovation in robotics and information technology have
transformed research.
In the search for new medical discoveries, automated
laboratories use robots to manipulate, store and retrieve
titre plates.

5. INTRODUCTION CONT.




Clinical diagnosis automation is an integral part of the
medical laboratory automation process.
It is a multidisciplinary strategy for the purpose of
capitalizing, optimizing, developing and research on
the technologies used in clinical diagnosis.
As a clinical diagnosis automation professional,
advanced and new technologies are developed in
order to improve productivity;
By enhancing the data quality of the experiments,
decreasing the lab process cycle time, and enabling
experimentation.

6. INTRODUCTION CONT.




Laboratory robotics field for example comprises of many
different types of automated instruments and devices;
Such as autosamplers, software algorithms, and various
methodologies.
These instruments and algorithms are employed to
enhance the effectiveness and efficiency of clinical
diagnosis in medical laboratories.
The most common software and equipment found in the
global clinical diagnosis automation market are
informatics and software, retrieval systems, standalone
robots, microplate readers and automated liquid handling
equipment.

7. MANUFACTURERS DESIGN CONTROL





Manufacturers are intended to understand quality system
requirement concerning design control.
Design controls are an interrelated set of practices and
procedures that are incorporated into the design and
development process, i.e. a system of check and balances.
Errors and discrepancies are corrected between the
proposed designs and requirements, are made evident and
corrected earlier in the development process.
Medical industry encompasses a wide range of technologies
and applications, ranging from simple hand tools to complex
computer-controlled machines;
From blood-glucose test strips to diagnosing imaging
systems and laboratory test equipment.

8. MANUFACTURERS DESIGN CONTROL CONT.




These equipment are manufactured by companies varying
in size and structure, methods of design and development,
and methods of management.
Designers benefit both by enhanced understanding of the
degree of conformance of the design to users and patient
needs, and by improved communications and coordination.
Armed with this basic knowledge, manufacturers can and
should seek out technology-specific guidance on applying
design controls to their particular situation.
There are benefits to an organisation and the quality
improvement of an organisation by having a written design
control system.

9. MANUFACTURERS DESIGN CONTROL CONT.




By defining this system on paper, a corporation allows
all its employees to understand the requirement, the
process and expectations of the design.
And also how the quality of design is assured and
perceived by the system.
It also provides a baseline to review the system
periodically for further improvements based on history ,
problems and failures of the system.
Verification and validation are checks and balances in
the design process that identify deficiencies and
discrepancies in the design before the equipment is
produced.

10. MANUFACTURERS DESIGN CONTROL CONT.




The requirements specification is an elaboration,
expansion, and translation of the need into engineering
terms.
The requirement specifications begin the design
process by defining what is needed.
The first assessment of how a new product can meet
business objectives typically needs to be done before
any significant development or investment takes place.
The second phase of the requirements capture
method, involves use of the functional analysis tool and
is intended to identify functional and performance
requirement.

11. MANUFACTURERS DESIGN CONTROL CONT.




Functional analysis is often done during the concept
generation of the design in order to help designers
generate possible solutions.
The purpose of the matrix checklist is to identify
requirements not captured by functional analysis.
Most of the requirements apply to the product as a
whole, not to a particular function.
Hence, the requirement specification method captures
problem definition, functional analysis, matrix checklist,
regulatory requirements guidelines, and specification
templates.

12. EXAMPLES OF MODULAR PREANALYTICAL
AUTOMATION SYSTEM

13. EXAMPLES OF MODULAR PREANALYTICAL
AUTOMATION SYSTEM CONT.

14. EXAMPLES OF MODULAR PREANALYTICAL
AUTOMATION SYSTEM CONT.

15. EXAMPLES OF MODULAR PREANALYTICAL
AUTOMATION SYSTEM CONT.

16. EXAMPLES OF MODULAR PREANALYTICAL
AUTOMATION SYSTEM CONT.

17. EXAMPLES OF MODULAR PREANALYTICAL
AUTOMATION SYSTEM CONT.

18. EXAMPLES OF TOTAL LAB AUTOMATION SYSTEMS

19. EXAMPLES OF TOTAL LAB AUTOMATION SYSTEMS
CONT.

20. EXAMPLES OF TOTAL LAB AUTOMATION SYSTEMS
CONT.

21. EXAMPLES OF TOTAL LAB AUTOMATION SYSTEMS
CONT.

22. EXAMPLES OF TOTAL LAB AUTOMATION SYSTEMS
CONT.

23. EXAMPLES OF TOTAL LAB AUTOMATION SYSTEMS
CONT.

24. PARTNERING GOVERNMENT AND INTERNATIONAL
ORGANISATION










UNITED STATES MILITARY
UNITED STATES AIR FORCE
UNITED STATES SPACE FORCE
DEFENCE ADVANCED RESEARCH PROJECTS AGENCY
AIR FORCE RESEARCH LABORATORY
NATIONAL ASSOCIATION OF MANUFACTURERS
UNITED STATES MINORITY CONTRACTORS ASSOCIATION
INDUSTRIAL EXHIBITION
UNITED STATES AGENCY FOR INTERNATIONAL
DEVELOPMENT
PRESIDENT’S EMERGENCY PLAN FOR AIDS RELIEF

25. REGULATIONS AND REFERENCE








EUROPEAN UNION REGULATIONS
UNITED KINGDOM MEDICAL DEVICES AGENCY
GUIDANCE
FOOD AND DRUG ADMINISTRATION DEVICE ADVICE
CENTER FOR DEVICES AND RADIOLOGICAL HEALTH
AMERICAN NATIONAL STANDARD INSTITUTE
INTERNATIONAL ELECTROTECHNICAL COMMISSION
INTERNATIONAL ORGANIZATION FOR
STANDARDIZATION
CENTERS FOR DISEASE CONTROL AND PREVENTION