The reason why fiber optics require so much of care, cleaning and inspection on regular intervals is because, this technology makes uses a beam of light to transfer the data. This beam of light travels in a straight line. But if the ray hits anything it will bounce off resulting into loss of energy and eventually disrupted data transfer.

1. How to use fiber optic cleaning products to clean the fiber optic cables?
Optical fiber cables are used in a variety of electronic devices for the purpose of data transmission, such as
telephone systems, computers and the devices used for networking. However many people do not worry about
taking caring of these delicate products as they are prone to loss of signal if not kept clean and free from dust
and dirt.
That is the reason, fiber optics require extra care to be taken so that it could function properly for a long period
without a hitch. Failing to keep them clean and away from contaminations such as dust, dirt, oil and other such
particles can cause malfunctioning of the entire network system disrupting the signal strength.
The reason why fiber optics require so much of care, cleaning and inspection on regular intervals is because,
this technology makes uses a beam of light to transfer the data. This beam of light travels in a straight line. But
if the ray hits anything it will bounce off resulting into loss of energy and eventually disrupted data transfer.
So in order to avoid that situation from happening, we have several fiber cleaning tools and products which can
be purchased online. One of the best websites to procure fiber optic cleaning products is www.fiberqa.com. In
the further section, we have discussed how to perform cleaning of these delicate cables, if you are doing it on
your own:
First, unplug the cable out of the electronic gadget in which it was plugged as well as from the wall outlet, if
that is possible.
Now hold the cable that you unplugged and the connector end. Now use a canned air spray which is designed
for fiber optic cables and spray it on the cables.
Use lint-free swabs that are available only for the purpose of cleaning fiber cables. Pick up the end of fiber cable
in your hand and then softly start inserting the tip of the swab inside the cable until you start feeling the
resistance. Now start rotating the swab until it has completed one round. Then pull it out from the cable.
In the next step, you are required to pick up a lens paper and fold it in half then apply one tablespoon of
isopropyl alcohol. Now wrap up the real cord of fiber cable with lens paper and start moving it alongside the full
length of cable to eliminate dirt, debris, dust particles and oil particles from the cable.
After having cleaned the connector, plug the cable back into both wall outlet as well the device from which you
took it out. But make sure to avoid contact with the cable end.
This was a brief overview of how you can perform cleaning of fiber optic cables at your own, if you have right
set of cleaning supplies.
If you ever decide to perform this type of cleaning at your home, make sure that you have appropriate set of
fiber optic cleaning products, or else you can ask for professional help.