EPC software - plant construction project management software

1. EPCPROMAN is a integrated software solution for Activity level
Project Management, Planning and Control, Progress
Monitoring, Material Management and reporting at various
stages of Piping Fabrication, Erection, Material, Warehouse, Pre-
commissioning of systems and Commissioning of units / plants.
EPCPROMAN is widely used by …
Piping Fabricators, EPC Contractors, LSTK Contractors, Owners &
Operators, PMC for all jobs related with OFFSHORE / ONSHORE
Petrochemical, Ship Building, Oil & Gas Refineries, Power Plants,
Breweries, Renewable Energies or any plant which include
Piping, Steel, Concrete.

3. ISOMEC is a software used for making automatic Piping Isometric drawings, Piping Spool
drawings, the Bill of materials and reporting from outline of isometric. This specific
application for Piping Engineering takes care of the complete Isometric drawing and
related documents and deliverables. The Software is automated, rule based and
specification driven. The dimensions and annotations are supported by all piping
components with an objective to maximize automation and thereby improving
productivity.
ISOMEC is customizable to specific needs.
ISOMEC can achieve maximum standardization, resulting in greater productivity and
profitability.
Benefits of using ISOMEC :
Cost saving as one doesn’t require CAD for implementing ISOMEC®
This software is specification driven. Just a rough sketch is require to turn the work that
normally takes hours into minutes
75% of time can be save with respect to manual CAD drafting & calculating the Material
Can be configured for various industrial requirements by customizing the software using
AUTOSYM & AUTOSPEC
Revision management is in-built in the software. The program automatically marks
clouds and reports the relevant details for any addition, deletion or modification

5. DSTEEL is a software for design of connections in the structural steel works. With the involvement of
the engineer, the software helps in getting an economical and practical design. This software covers
all industry requirements.
It is based on codes. Various provisions of codes are available for reference as the context sensitive
help and reference clauses are mentioned in the reports . The project specifications can also be used
to control the design requirements.
This software does the automation of all the manual work involved in the design process. The results
from repeat trials by varying the parameters can be compared. Tailor made solutions can be supplied
for a specific project.
It is user-friendly and the non-fulfillment of the code requirements or mismatches are immediately
reflected in RED and the area which needs revision of input is highlighted.
The change and Revisions are a part of the life of every project. In Steel Construction, this being not
an exception, amounts to revisions in connection details. The design of connections between various
elements of a structure is Complex at times. DSTEEL is developed with the aim of providing an easy
and a generalized method of designing connections as per the standard codes and specifications.
While designing a particular connection, a 3-dimensional view is created which can be rotated and
the actual scenario can be visualized. The input is provided under various categories, which
immediately reflects in the 3D and the corresponding 2D views to reflect the changes.
A good knowledge of structural design helps to use the software effectively. However, a less familiar
user can also use and understand from the various messages and warnings displayed by the
software.
The software is completely parametric. This helps to accommodate the revisions and see the results
instantaneously.

6. AUTOSPOOL is an automatic piping spooling software
used for generating piping Fabrication / Erection
Isometrics and related reports based on the convenience
of Fabrication / Erection work, site requirements,
spool transportability, etc. and to achieve the best
international construction practices and clients
requirement standard.
The program generates the Fabrication / Erection
construction scope in Inch Dia., Inch Meter and tonnage.
It also calculates piping cut length, piping bending length,
spool weight and surface area as required in the project.

7. SPOOLMAN / ERMAN is a project control solution for
planning,management of material & construction activities for
spool fabrication & erection at shop/site.This software is useful for
effective matching front analysis, work allocation, material
allocation, piping material control and tracking of spools & erection
items. The program is valuable for an efficient macro and micro
level construction planning beginning from issuing
materials, fabrication / erection of spools, quality inspection&
testing, painting till the generation of line history sheets,
transportation of finished spools to lay-down for storage, dispatch
to site for erection, mechanical clearance, insulation, final
clearance of loops & systems.