Quick Installation Guide EZ Hotspot Extender Compact English
1. Quick Installation Guide
EnGenius Europe | Veldzigt 28, 3454 PW Utrecht (NL)
0900-WIFIABC | www.wifiabc.com Disclaimer: Information may be subject to changes without prior notification.
Follow us
https://www.linkedin.com/company/engeniuseurope
https://plus.google.com/+EngeniusEuropeBVDeMeern
https://www.youtube.com/user/engeniuseuropebv
https://twitter.com/engeniuseu
Type ezhotspot.eu in your browser.
Select which option applies at your location.
Below ‘Quick Hotspots’ you can find even more options that may
apply at your location.
Go to your network center, view the SSIDs (network names) and
select ez@XXXXXX. You can find this address at the back panel of
your product. Enter your password (this is also on the back panel).
Remove the rear bottom panel.
Connect one end of the Ethernet cable (not supplied) to the LAN
(PoE) port on the EZ Hotspot Extender. The LAN (PoE) port can be
founded on the right-hand side as seen from the back of the device.
Connect the other end of the Ethernet cable to the PoE injector’s
PoE port. Connect the power cable of the PoE Injector and plug the
power cord into an electrical outlet. The device is ready for
configuring when the two LEDs (Power and Wireless) are lit and the
green LED stops blinking. This may take about 30 seconds.
1
2
3
4
6
5