1. Edsil G. Cabrera II
# 10 J. Panganiban Street Krus Na Ligas Diliman, Quezon city
+639175665633 / edsil_cabrera@yahoo.com
Registered Mechanical Engineer
License Number: 0075918
OBJECTIVE
To help a successful organization or company expand further and to help myself
grow further professionally and to enhance my engineering skills.
SUMMARY
A licensed Mechanical Engineer practicing the profession for more than 5 years, with 2
1/2 years of experience as a design engineer in engineering design concerning on Energy and
Chemicals project particularly routing of Pipes and modeling of equipment by coordinating to
Process and Mechanical team for the P&ID and Data Sheets. Incorporate the design basis and
criteria based on Project standards. Experienced and capable of using SP3D, PDS, Smart Plant
Review, AutoCad and Microstation.
3 years of experience in Waste Treatment Plant and Waste to Energy Plant(Incineration
Plant) which includes 2D Detail Design of Pipe Spool and Support drawings using AutoCad, 3D
modeling of equipment and piping in EYECAD software. Mechanical design principles such as
Pipe routing and Support. Knowledgeable on the basic principle and operation of Incineration
Plant and Wastewater Treatment Plant.
WORK EXPERIENCE
Fluor Daniel Inc. Philippines
7th
Floor Polaris Corporate Center Lot 6 & 7, Block 1, Spectrum Midway Filinvest
Corporate City, Alabang Muntinlupa City, Philippines 1781
Tel. No. (+632)850-4451
June 2014 – December 2016
Piping Designer
Job Description :
- Preparation of deliverables such as isometric drawings for IFC issue.
- Applies project drawing standards to design drawings.
- Consistency of P&ID and check if lines are modeled.
- Prepares 2D Computer Aided Design Drawings of Moderate complexity.
- Conducts reviews of model using 3D Review platform and creates 3D
models of moderately complexity.
Specific Experience:
Position : Piping Designer I Project : Sasol - Ziegler
Company : Fluor Daniel Inc. Philippines Location : Westlake, Louisiana
04/2015 – 12/2016
Roles and Responsibilities:
Responsible for detailing and issuing of fabrication isometrics with tie-ins to existing
lines and taking note of existing structures and lines using SP3D & Smart-sketch.
Generating Quality Isometrics in line with project standards, project specifications.
2. Resolve model review comments as per Client, Home Office and Internal Office.
Layout, design or re-routed simple to moderately complex areas using SP3D.
Develops detailed design project piping model. Check, back check, and correct
assigned piping models, drawings and isometrics.
Prepares and check bill of materials from P&ID’s, piping drawings and isometrics.
Layouts and arranges equipment, piping, design specifications provided in P&ID.
Perform Squad Check for Vendor Data Sheets and Internal drawings.
Provides close interface with, and promotes the understanding of other discipline
functions.
Specific Experience:
Position : Piping Designer I Project : Lemongrass - Citral
Company : Fluor Daniel Inc. Philippines Location : Kuantan, Malaysia
06/2014 – 03/2015
Roles and Responsibilities:
Preparation of deliverables such as isometric drawings for IFC
Perform PDS models specifically routing of pipes based on P&ID and updates
models (Piping & Equipment) based on latest revision of P&ID and vendor drawings.
Model, check and review on 3D design in accordance with project specification and
standards.
Communicates and interfaces with other discipline.
JFE Techno Manila, Inc.
Ortigas Center, Pasig City, Metro Manila, Philippines 1605
Tel. No. (+632)654-2548
June 2011 – May 2014
Mechanical Engineer – Environmental Section, Tsukishima Kikai (TSK) Group
Job Description :
- Design and Calculation of Waste Treatment Plant and Waste to Energy
Plant (Incineration Plant)
- 2D Detail Design of Pipe Spool and Support Drawings
- Basic Piping Plan Layout
- Material Take-off
- EYECAD 3D Modelling
Overseas Dispatch
Japan (August 2012 – September 2012)
Arakawa Project
Spool Drawings
Detail Support Drawings
Okayama Project
Spool Drawings
Detail Support Drawings
Indonesia (September 2013 – April 2014)
Indonesia Chemical Alumina (ICA) Project
Spool Drawings
Detail Support Drawings
3. SKILLS AND QUALIFICATIONS
Computer Literate
1. Smart Plant 3D (SP3D)
2. Plant Design System (PDS)
3. Computer Aided Designs (Auto CAD & Microstation)
4. EYECAD 3D Modelling Software
5. Microsoft Office (Excel, Word, Power Point)
Knowledgeable on the basic principle and operation of Incineration Plant and
Wastewater Treatment Plant.
Can speak English and understand basic Japanese language
TRAININGS
Piping Basic Stress
Fluor Daniel Inc. Philippines
March 12 – April 15, 2016
SP3D CAD Training
Fluor Daniel Inc. Philippines
March 23 – April 01, 2015
PDS Training
Fluor Daniel Inc. Philippines
June 02 – 20, 2014
EDUCATIONAL BACKGROUND
COLLEGE: Mapua Institute of Technology
Intramuros, Manila
Bachelor of Science in Mechanical Engineering
Year Graduated: August 2010
SEMINARS ATTENDED
Overview of Philippine Wholesale Electricity Spot Market
April 29, 2009
Career Opportunities in Lufthansa Technik
August 12, 2009
Aircraft Repairs
August 12, 2009
First Aid for Common School Emergencies
August 19, 2009
Mechanical Engineering Law: Issues and Concerns
September 2, 2009
Eurocopter Philippines
September 23, 2009
Lufthansa Technik Philippines
September 23, 2009
4. PERSONAL BACKGROUND
Date of birth: May 19, 1988
Birthplace: Fabela, Manila
Civil status: Single
Nationality: Filipino
Age: 25
Height: 5’3”
Weight: 176lbs.
CHARACTER REFERENCE
Engr. Maria Concepcion Lamarroza
Civil Engineer
Fluor Daniel Inc. Philippines
+63-9213192454
Engr. Jervz Naval
Mechanical Engineer
Fluor Daniel Inc. Philippines
+63-9177751547
I hereby certify that the above information are true and correct to the extent of my
knowledge and abilities.
Edsil G. Cabrera II
Applicant