SELGO COMPANY PROFILE 2015

Efficiencies That Save You Time
& Money
COMPANY PROFILE

2 | P a g e Efficiencies That Save You Time & Money!
Selgo Engineers Limited
AmBank House ,Lower ground University Way ,Nairobi Kenya,
Tel: 0722 953 302 / 0720994697,0712699679 Email: info@ selgoengineering.com www.selgoengineers.com
www.facebook.com/pages/Selgo-Engineers-Ltd

COMPANY PROFILE
FROM
AmBank House
Lower ground University Way
Nairobi Kenya.
Email: info@ selgoengineering.com
Tel: 0722 953 302 / 0720994697. 0712699679
www.selgoengineers.com
P.C.E.A. Kikuyu Hospital.
P.O. Box: 45-00902

Kikuyu.
RE: ENERGY AUDITS
Dear Sir/Madam,
Selgo Engineers Ltd is a strategic alliance serving both the domestic and international clients. With a focus
on professional services Selgo Engineers Ltd provides you with a proven record in various sectors.
Selgo Engineers Ltd places on record its sincere thanks to the management for providing the
opportunity to present energy audit presentation. We appreciate the co-operation and guidance
extended to us.
The Energy Audit is conducted with the objective of identifying energy saving opportunities through
operational changes, heat integration, equipment efficiency improvements and use of less energy
consuming alternatives.
Measurements are conducted by using portable instruments; electrical, mechanical and thermal systems
are covered. Specifications of equipments and operating data are collected to assess efficiency
and performance of various systems. Frequent discussions with plant personnel, during the energy
audit, helps improve understanding operations, various measures already taken and future plans.
This report incorporates measurements, analyses and energy saving potential identified in each area
along with approximate investments and payback periods. Selgo Engineers Ltd is endowed with modern
technological skills required to handle the above.Energy Management Regulation 2012 enacted by the
Ministry of Energy under Section 110 of the Energy Act, 2006 and is implemented by the Energy Regulatory
Commission (ERC). Under section 6 (1)
The proposals are introduction of an Energy Management Policy and carrying out of energy audits. Every
designated facility shall undertake energy audits every three years. Energy audits shall be
undertaken by a licensed energy auditor or audit firm.
Our rates are reasonable and competitive do not hesitate to call on us for a presentation.
Yours sincerely,
Samuel Atego Were [Managing Director]

Profile
Selgo Agencies which started as a sole proprietorship in 5th
January 2009 and was officially registered on 16th
January 2012 in accordance with the provisions of the Registration of business act. The firm also maintains
excellent capabilities and expertise in specialized services and sustainability and serves its clients throughout
Africa. We are a medium sized Company run by three partners. We have a management team & site supervisors
who are deployed from site to site Our skilled labor forces are hired when we have a project. We get our
unskilled laborers from the community in which the project is being carried out. This is because we strive to
promote local community. We select the more competent ones & we train them.
We offer services in: building & construction, refurbishment, aluminum partitioning, painting,
plumbing & electrical works, consultancy, project management among others. We have a team of
competent masons, carpenters, steel fixers, painters, welders, electricians, plumbers among others.
Our main objective is to ensure the emphasis of quality assurance, control & timeliness in project
completion. Our main goal is to promote integrity of the company by upholding the company’s
policies. Our rates are very competitive & satisfactory to our clients.
Our Vision
To be recognized as the preferred professional Engineering consultant and solutions provider of choice,
trusted business advisor who contribute mostly to our people, our clients and stake holders by creating
confidence and added value through quality services that we offer.
Our Mission
To be the leading Engineering Company in East Africa who not only offer solutions to customers but
also exceed their expectations through a superb quality and timely service delivery.
Our Core Values:
We as an organization hold on to principles that we believe in;-
• Honesty
• Reliability
• Accountability
• Fairness
• Self discipline
• Team work
Based on our understanding, we confirm that our organization has the capability and experience to
successfully undertake the above engineering related jobs. The purpose of this is to make you aware of
the services we can offer to your organization.

Our organization consists of qualified and experienced who bring up to date expertise to assist with
multi-skilled and competent in mechanical, electrical and automation technologies.
• Electrical engineers
• Design architects
• Civil engineers
• Energy auditors
• Building and constructions engineers
• Boiler and steam systems experts
• Green energy solutions consultants
• Structural engineers
• Hotel engineers
• Quantity surveyors.
This enable us to tackle any engineering need from design inception to full job completion and to provide
appropriate workable solutions that covers different functional dimensions through the use of leading experts.
Consumer guarantees include:
1. Goods will be of acceptable quality;
2. Goods will be fit for any disclosed purpose;
3. Goods will match their description;
4. Goods will match the sample or demonstration model;
5. Any express warranties will be honoured;
6. Spare parts and repair facilities will be available for a reasonable time; and

7. Services must be provided with care and skill, be fit for any disclosed purpose and achieve any
disclosed result.
Energy Management Audits
Selgo Engineers Ltd conducts detailed energy audits in factories, industries, organizations, hotels, colleges and
in buildings. We offer consultancy services on how best you can be able to save energy and how to invest in
green energy buildings due to the rising energy costs.
Efficiency Centre in conjunction with ERC to offer
investment grade audits to comply with the laws,
regulations, and other requirements within a period
of three (3) weeks.
Selgo Engineers Ltd can also assist your energy team
and help you build a culture of awareness within your
organization.
The general flow of audit activities is to identify all
energy systems, evaluate the condition of the
systems, analyze the impact of improvements to
those systems, and write up an energy audit report.
This report explains the existing conditions of the
building(s) in terms of the envelope, equipment,
lighting, and occupancy, followed by
recommendations to improve efficiency through
improvements in operation and maintenance items, or O&Ms, and through installation of energy conservation
measures, or ECMs.
Energy Auditing Key Points
1. Energy and water audits help form the foundation of an energy program by identifying energy
conservation and cost-savings opportunities for energy efficiency.

2. It is important to set audit priorities among the many opportunities for energy savings.
3. An important function of an energy audit is to inform installation decision makers about the findings and
to convince them to allocate the necessary resources to correct any deficiencies.
4. Audits should be performed only to the level needed for determination and justification of energy
conservation measures. Energy conservation is achieved by the implementation of energy conservation
measures.
5. Purpose of the Energy Audit of Energy audits evaluate current energy usage and assist facilities in
determining the best locations to incorporate energy savings measures. The primary purpose is to
determine how to reduce energy use and cost. “Energy survey,” “energy analysis,” and “energy
conservation study” are similar terms that may refer to the same type study.
An energy audit should answer the following four questions:
a. How much energy of each type is being used?
b. How much does the energy cost?
c. What is the energy being used for?
d. What opportunities exist for reducing energy use or cost?
Identifying Potential Measures
Once the end user profiles have been estimated, Selgo Engineers Ltd will use this information to develop an
initial list of potential energy conservation measures (ECMs) and prioritize on-site audit activities. The most
common ECMs found in existing commercial buildings typically fall into the following categories.

1. Building Operation
2. Lighting Systems
3. HVAC Systems
4. HVAC Distribution Systems
5. Energy Management Control Systems
6. Building Envelope
7. Power Systems
8. Water Heating Systems
9. Heat Recovery Opportunities
Executive Summary
The Executive Summary will be a simple, straight forward and to the point explanation of the current situation,
recommended improvements, and advantages of taking recommended actions. This will include a brief
Introduction to the facility and describe the purpose of the audit and overall conclusions. This section provides a
general background of the facility, its mechanical systems, and operational profile. It should include a
description of the building envelope, age and construction history, operating schedules, number of employees
and occupancy patterns, and a discussion of the operation and maintenance program. It is also useful to include
a floor plan, selected photos of the facility and mechanical systems, a description of energy types used in the
plant, and a description of the primary mechanical systems and controls.
Utility Summary
Energy accounting information for the last two years is included in this section Selgo Engineers Ltd will attach
selected charts and graphs that were developed for analysis that are easy to understand and demonstrate the
overall consumption patterns of the facility. The information for each graph to suit each target audience. For
example, actual monthly consumption by fuel type may be of more interest to the engineering and maintenance
staff while annual costs or dollar-savings information may be more appropriate for administrative personnel. Pie
charts of energy use and cost by fuel type can offer compelling documentation of overall energy uses and
expenses.
Selgo Engineers Ltd will include a summary of overall facility benchmarks, energy use indices, and comparisons
with industry averages. This includes a copy of the utility rate schedules and any discussion or evaluation of rate
alternatives for which the facility may qualify.

Energy Conservation Measures (ECMs)
Selgo Engineers Ltd will present a summary list of Energy Conservation Measures that meet the financial criteria
established by the facility owner or manager. For each measure, include the measure name, estimated cost,
estimated savings, and simple payback in a summary chart. A one or two page description of each energy
conservation measure and support calculations should follow this summary chart. This include the ECM
description, energy use and savings calculations, and the simple payback, net present value or life cycle cost
analysis. It’s also a good idea to discuss any assumptions that were made regarding operation or equipment
efficiency. ECMs that were considered but fell out of current financial criteria should also be listed and identified
as have been evaluated.
Operation and Maintenance Measures (O&Ms)
Selgo Engineers Ltd will address operational and maintenance issues observed during the site visit. Include
descriptions of specific low-cost operational and maintenance items that require attention. Include items that
will reduce energy consumption and costs, address existing problems, or improve practices that will help
prolong equipment life of systems not being retrofit. It is also useful to the owner to include cost and savings
estimates of O&M recommendations.

Appendices
Support material and technical information not included elsewhere in the report can be added to the
appendices. Typical information in this section includes, floor plans and site notes as appropriate, photos, audit
data forms, motor, equipment, and lighting inventories, and equipment cut sheets of existing or recommended
systems.
SUMMARY
When Selgo Engineers Ltd will complete the audit activities, you should have a good understanding of the
primary drivers affecting facility energy use. By identifying the energy consuming components of a building or
plant and documenting the existing conditions, conservation opportunities can be identified and prioritized. A
meeting with the building or plant manager to go over your report will be scheduled to discuss the
recommendations for conservation actions, methods of funding ECMs. Training, recommendations for building
operators and occupants will improve the operating efficiency of the building as well as training required for
maintenance and operation of newly install measures.

Ground Resistance Testing
Selgo Engineers Ltd now offers Ground Resistance Testing; we have engineers certified in ground resistance
testing!
1. Why do you need Ground Resistance Testing?
Good grounding is more important than ever in today's rapidly changing world of technological advances. It can
prevent costly damage and downtime due to service interruptions and inoperative surge protections caused by
poor grounds.
2. What is meant by Ground Resistance?
The term "ground" is defined as a conducting connection by which a circuit or equipment is connected to the
earth. A "ground" consists of a grounding connector, a bonding connector, its grounding electrode(s) and the
soil in contact with the electrode.
Grounding systems offer protections from natural phenomenon such as lightning by channeling the lightning
current to the ground, protecting personnel from injury and protecting system components from damage.
In electric power systems, with ground returns, grounds help ensure rapid operation of the protection relays by
providing low resistance fault paths in the event of unexpected potentials due to faults. Low ground resistance is
required to meet NEC, OSHA and other electrical safety standards.
Systems that need ground testing
To determined Soil Resistivity, Environmental Influence and Bond Resistance.
1. Cellular Tower Testing
2. Service Entrance or Meters
3. Pad Mount Transformers
4. Telephone Cabinets & Enclosures
5. Pedestal Grounds
6. Network Interface Device (NID) with a protector block
7. Overhead Telephone Distribution

Quotation
ENERGY AUDIT AND CONSULTANCY SERVICES FROM KSHS. 250,000 +VAT.
GROUND RESISTANCE TESTING 50 POINTS FROM KSHS. 120,000 +VAT.
POWER QUALITY TESTS 3 DAYS DATA COLLECTION FROM KSHS. 120,000 +VAT.
Payment should be made and effected promptly upon competition of the work. Our invoice will also be
furnished as soon as the scope of work is completed.
Our goal is to offer energy performance benchmarks for commercial, institutional, and industrial facilities
benchmarks allow you to rate your building’s or plant’s energy performance to similar buildings nationwide.
Energy Audits implementations are important for the physical and operational characteristics as well as
weather, to allow for comparisons to be made on a level playing field. All benchmarks provide a score on a score
on a scale of 1-100. Facilities with a score of 75 or over are eligible for the ENERGY STAR Label.
Energy Performance
Clients who we have assisted on average use about 40 percent less energy than average buildings and plants,
without compromising comfort, services, or quality.

Professional Solar Panel Installers
At Selgo Engineers Ltd, we believe in creating a bright and sustainable future
for all people. As a leading solar energy company with locations throughout
the Kenya we're bringing that future closer to reality, one installation at a
time. We specialize in solar panel solutions for business, agricultural and
home applications. We believe there is no better investment than solar
energy, so let us help you determine Green energy solutions if it’s right for
you.
Why Solar Technology?
ü Solar energy is environmentally friendly!
ü Solar energy is renewable!
ü Solar energy is inexhaustible!
ü Solar energy is affordable for everyone!
How Does Solar Technology Work?
The principle is very simple: solar energy heats the water in the solar circuit inside the collector. The
closed solar system extends from the roof into the cellar and delivers the solar heat to the storage
system via a heat exchanger. The more solar collectors installed, the more solar energy is collected and
is then available for heating domestic hot water or supporting the heating system. Of course,
combined systems for heating swimming pools can be realised in any size.
Solar Pv And Solar Water Heating
Due to the rising cost of electricity especially in water heating, the need to use solar heater panels
cannot be wished away. Selgo Engineers Ltd supplies and installs the best solar panels in the current
market and gives a 10 year warranty with a payback period of not more than 2 years. Depending on
your requirements we will be able to identify the best design and capacity for you. If you are living in
the remote areas that are not connected to the national grid relax because we have solar photovoltaic

lights with high flux intensity and low wattage. This ranges from security lights to public area lighting
schemes
Benefits
Just some of the many benefits of installing a renewable energy solution:
o Non reliant on fossil fuels.
o Reducing CO2 emissions.
o Plan your future fuel bills.
o Create a healthier world for this and the next generation.
o Start saving now - the sooner you install a renewable energy system, the sooner you'll gain the
benefits.
o Achieve your company's environmental goals.
o Makes a visible statement to your customers and competitors.
o Much lower servicing costs (based upon gas or oil boilers)
o Huge savings on energy bills.
• Residential solar power for home use
There are many qualifying programs for solar power for home use. We will help you find the incentives in
your state and help you understand them.
• Commercial solar power for business use installs grid-tied commercial solar systems to serve solar
power for business use.
• Agriculture solar power for farm use has saved farmer’s substantial, measurable savings with systems
that provide solar power for farm use.
Solar panel systems are what we know best, and we're committed to using our expertise to make it easy
for you to go solar. We will identify the government grants and tax incentives that you're eligible for.
We'll even do the paperwork for you!
THE ENERGY (SOLAR WATER HEATING) REGULATIONS, 2012 NOTICE
Installation and use of solar water heating systems legal IN EXERCISE of the powers conferred by sections
63 and 110 of the Energy Act, 2006, the Minister for Energy makes the following Regulations:-
(1) All premises within the jurisdiction of a local authority with hot water requirements of a capacity
exceeding one hundred litres per day shall install and use solar heating systems.
(2) Within a period of five years from the date of coming into force of these Regulations,
all existing premises with hot water requirements of a capacity exceeding one hundred
litres per day shall install and use solar heating systems.

(3) A person who contravenes the provisions of this regulation commits an offence and
shall, on conviction, be liable to a fine not exceeding one million shillings, or to Imprisonment for a term
not exceeding one year, or to both.
SUNSET
High-Performance Solar Collectors:
ü Eligible for subsidies across Germany and in Europe!
ü High level of quality assurance thanks to ISO 9001
ü „Blue Angel“ environment label thanks to high energy efficiency
ü CEN Key mark
ü Environmental management in accordance with FSO 14001
The Advantages of a Complete Solar System:
ü Excellent price-performance ratio
ü Greater performance reserves thanks to generously sized, collector area and extra-large storage tank
ü Easy, fast and cost-effective installation thanks to large area collectors
ü Easy installation for do-it-yourselfers and experts alike
ü All necessary solar components included
ü Detailed product and installation descriptions
ü Suitable for roof integration, stand-mounting and on-roof mounting
0
1
2 Resurface Your Tub and Sanitary Ware

3 A simple, quick, & cost-effective bathroom update
Selgo Engineers provides an affordable alternative to replacing your old, discolored bathroom suite. We
do a range of top quality coating products for the restoration and refinishing of unsightly bathtubs,
washbasins, shower bases and tiles to fixing damaged grouting or mildewed and dirty silicone.
4
5
6
7 Selgo Engineers will resurface your bathroom fixtures on site within a matter of hours, leaving them as
good as new, with a tough, durable and stain-resistant finish.
8
9
10 Optional services can also be applied during the resurfacing process to provide a “slip-resistant” pattern
on the base of a bathtub. This is a major safety innovation and is used by leading hotel groups around the world.
Our materials are chip resistant,flexible,chemical/heat/abrasive resistant.
11
12 Selgo Engineers partners with B&B's, contractors, apartments, property managers, co-op housing, and
hotel properties. Refinishing or reglazing is also available for sinks, tile, swimming pools, showers, Jacuzzi and
enclosures.
We offer a comprehensive written
guarantee certificate.There will be
no tub removal, no re-flooring, no
re-plastering, no re-tiling, and no
mess. Simply 4-5 hours of work, a
24 hour cure time.
Bathtub replacement can cost up to
75% more than bathtub reglazing.
The costs of reflooring, re-
plastering, and re-tilling have to be
considered in the cost of tub
replacement.

13
14 Trade off between noise, messy, and disruptions to the home. While the renovation is going you will be
without the use of one of the most important rooms in the home. You will spend most of the time waiting on
trades for flooring, tiling, plastering, and plumbing. For hotels or rental properties, this means a loss of income.
As a final thought, how will the tub come out of the room? It won't, they will have to break it up. What a mess!
And you will have to pay for it all!
15
16
17 To Selgo Engineers this is a simple, quick, and cost-effective way….
18
19
20 Call us for a demonstration or quote.
21 CALIBRATION SERVICES AND TESTING

The Selgo engineers laboratory provides calibration services and testing to all industries whilst
maintaining a reputation for quality, cost effectiveness and reliability. We are vibrant and professional
firm employing cutting edge technology for the benefit of our clients. At the same time we have
unrivalled knowledge and experience in our fields of expertise, covering Calorimetric Test, Air Flow
Calibration, Fluid Flow Calibration, Component Cleanliness and Thermal Fluid systems. With solid
experience between the staff, clients can be assured of a professional service.
Standards And Conformance
A world without standards and conformance would soon descend into chaos. Transport and trade
would become impossible. The Internet would not function. Hundreds of thousands of systems
dependent on information and communication technologies would falter or fail — from government to
banking, healthcare to air traffic control and emergency services to disaster relief.
Without standards and conformance, ordinary everyday tasks would be difficult or even dangerous to
carry out. Equipment safety standards provide protection at work and at play. At home, standards
ensure electrical appliances connected to the grid are safe to operate. Conformance and conformity
assessment are mechanisms to determine if products and services do indeed conform to the relevant
established standards.
Hence, an internationally aligned standards and conformance infrastructure is an essential foundation for an
effectively functioning economy in today’s global marketplace. This is where metrology, standardisation and
accreditation of conformity assessment activities come into play, forming essential components of an
infrastructure that supports sustainable development and a nation’s ability to fully participate in the global
economy
Selgo engineers specialize in the areas of flow measurement and thermal systems, and provide their
expertise to an abundance of industry specific clients. Three departments cover the range of calibration
services on offer, namely the Calibration Laboratory, the Thermal Fluids Test Laboratory and the
Component Testing Laboratory. The Calibration Laboratory houses eight specialist flow rigs, for gas
flow, air flow, water flow, oil flow and fuel flow, and is complimented with calibration and testing
facilities for air velocity, pressure, temperature, humidity, electrical, mass, torque and acceleration. All
our test rig equipment is calibrated to recognized standards in accordance with ISO 17025, meaning all
equipment is traceable to National Standards. The Calibration laboratory also holds Kenas accreditation
for a variety of parameters.
(a) Calibration

(b) Testing
(c) Cleaning
Calibration will allow you to reduce your supplier base from three to one and cover all our R&D test
rigs with their onsite calibration service using out of hours support. Asignificant reduction in test rig
downtime has been observed since moving our calibration to Selgo Engineers.
Excellent service, cost competitive, excellent turnaround times and we will always be there in times of
emergency support.
Description

Ammeter
Flow meters
Flow meters
Manometer
Pressure gauges
Temperature gauges
Temperature sensor
Vacuum Gauge
Voltmeter
Weighing scale
Call us for a demonstration or quote

The PSS window laminate security solution PSS laminates
Our goal is to ensure that the public, both inside and outside of buildings are protected against the
threats of broken and flying glass. Our security laminates can be retrofitted or applied to new
glass installations. When retrofitted to existing glass, PSS laminates are the single most cost effective
solution to reduce threats and injury from forced entry attacks, severe weather, bullets and explosive
blasts. It’s a one-time investment that pays off!
Tested by the British Standards Institute.
We Have You Covered The PSS window laminate security solution PSS laminates
make standard & auto glass bomb & bullet resistant
Buildings with unprotected glass windows and doors become easy targets during serious security
threats. If bullets. Neglecting to take the proper safety precautions could destroy innocent lives and
valuable assets. To help safeguard when tragedy strikes, PSS has developed the only high-tech security
window laminate that Comprehensive research and testing have made PSS the world’s leader in the
glass protection industry. PSS has designed a micro thin multi-layer polyester security laminate that
protects against a wide range of fragments together providing additional protection.
PSS security window lam recommended for banks, embassies, government and military buildings, store
front businesses, houses, apartments, vehicles, schools, hospitals and other institutions.
Applications
• High level of fragmentation retention
• High-end bomb blast and explosive resistance
• Added protection during hurricanes, tornadoes and earthquakes
Ultimate Protection
PSS Excel
Standard security in a 2 ply laminate
Smash and grab and graffiti protection
Bomb blast & explosive resistance
Features
PSS Excel security window laminate compliments security and safety by protecting occupants and
contents of buildings against vandalism, smash and grab attacks and explosions.
Glass windows and doors treated with PSS Excel are almost impenetrable, even under the most violent
attacks. If the glass breaks, the adhesive grip of the laminate holds the fragments together and
prevents forced entry and also minimizes injury caused by flying glass.
In the event of an explosion, PSS Excel helps to reduce or prevent injury from flying debris and glass
shards, which are the primary cause of casualties in these events.

Smash & Grab Window Laminate
Specifications
Break Performance:
221 lbs./inch (width)
Tensile Performance:
28000 PSI
Mounting Performance:
PS high bond acrylic adhesive – 14lbs. per ream
UV Rejection:
99%
Visible Light transmission:
92%
Solar Protection:
82% transmitted, 10% reflected, 8% absorbed
Solar Energy Rejected:
17%
Thickness:
8mil, 203 microns
Installation must be performed by a trained technician
PSS Elite
PSS Elite has achieved the equivalent of NIJ
level IIIA & HG2 (NIJ level IIIA)
AK-47 from a distance of 5 Metres
19mm glass using 5 layers of PSS Elite laminate
9mm Round from a distance of 5 Metres
Features
PSS Elite is a 3 ply, anti-ballistic, security window laminate suitable for general use on flat
glass in buildings. It is designed to protect building occupants against small arms fire and is rated as
having achieved the equivalent of NIJ Level IIIA and the UK's HG2.
Multi-layered, PSS Elite laminate can prevent penetration from rounds such as 9mm, 12 bore shotgun
and 7.62 x 39 FMJ (AK47) on standard
float glass.
PSS Elite laminate has a clear coat protection surface with an acrylic coating to protect against
daily wear and tear.
PSS Elite is also capable of a high level of fragmentation retention, in the case of explosions and should
be installed by a trained operative.
Bullet Resistant Window Laminate
Standards

This film is also suitable to withstand multiple ballistic impact points. Calibre resistance thresholds are
determined by an authorized specialist, ballistics engineer or ballistics expert.
Specifications
Break Performance:
336 lbs./inch per layer
29500 PSI per layer
Peel Performance:
7 lbs./inch (3.18 Kg/2.54 cm)
Aggressor bonding 15 lbs. (6.8 Kg) per ream
UV Rejection:
99.5%
93%
Solar Protection Efficiency:
82% transmitted, 11% reflected, 9% absorbed
18%
Thickness:
12mil, 305 microns
Installation must be performed by a trained technician
PSS Advanced
PSS Advanced has achieved the equivalent of NIJ level IIIA & HG2 (NIJ level IIIA)
AK-47 from a distance of 5 Metres
9mm Round from a distance of 5 Metres
Features
PSS Advanced is a 3 ply, anti-ballistic, security window laminate that is designed to protect building
occupants against small arms fire and is rated as having achieved the equivalent of NIJ Level IIIa and
the UK's HG2.
Multi-layered, PSS Advanced laminate is able to prevent penetration from rounds such as 9mm, 12
bore shotgun and 7.62 x 39 FMJ (AK47) on standard float glass.
PSS Advanced is also capable of a high level of fragmentation retention, in the case of explosions
and should be installed by a trained operative.
Multilayer installation required
Multi-layer configuration:-

Three layers Virgin™ PET substrate
2 layers of speciality PSS-Plus Aggressor™PET-PET adhesive
1 layer of speciality PSS Plus Aggressor™ PETGlass adhesive
Bullet Resistant Window Laminate
Standards
This film is also suitable to withstand multiple
ballistic impact points. Calibre resistance and
glass thickness thresholds can be determined by
an authorised specialist, ballistics engineer or
ballistics expert.
Specifications
(based on multi layer application)
Break Performance:
336 lbs./inch per layer
29500 PSI per layer
Aggressor™ Plus bonding
UV Rejection:
99.5%
87%
38%
Thickness:
12mil, 305 microns
Installation must be performed by a
trained technician
Our Laminate Your Window hen applied to glass, PSS laminates transform windows into a virtually
impenetrable barrier PSS manufactures a micro-thin transparent window laminate which converts
regular glass windows into barriers that can resist the force of handguns, bombs, high impact
projectiles and extreme weather conditions.
Eddie Ngari
Sales Manager
0720994697

OTHER SERVICES:
Electrical Service and Installations
Selgo Engineers Ltd does electrical installations in buildings ranging from domestic house to tall storey building
with up to more than 10 floors. We do both single phase and 3 phase circuits. We do street lighting systems
using LED lights that are low wattage but have very high potential of light intensity.

We service and install a range of electrical equipment and machines like motors,generators,laundry
machines,kitchen ovens,etc
Refrigeration And Air Condition
Selgo engineer’s ltd has a team of qualified and experienced refrigeration engineers that designs cold rooms
using the most modern panel system that is highly energy efficient without compromising on the temperatures
and overall performance. We also supply and install air-conditioning units of international brands like
Daikin,LG,samsung,etc.
Boilers And Steam Systems
A steam boiler system has found applications in many institutions particularly in steam generation and hot water
heating. We supply and install boilers, steam lines and control valves as per the required standards. We have a
team of certified boiler inspectors; we do hydraulic tests, pressure tests on the boiler, water hardness/quality
tests. We also conduct flue gas tests to basically determine the boiler efficiencies. We work hand in hand with
KAM to advise clients on the best practices on the boiler and how to improve efficiencies through low cost of
production. Boiler Fuel IDO usage.
Plumbing
Selgo Engineers ltd has the most convenient plumbing designs that will not only see you reduce the water
consumption but also reduce the cost of installation. We use a wide range of pipes from GI, PPR, to CPVC which
are more elegant both in design and performance. We install both underground and overhead tanks to buildings
and institutions. We supply and install Energy efficient water pumps with variable Fan Drives VFDS that will see
you reduce the cost of pumping by 30%.
We offer solutions on water purifications through the use of Reverse Osmosis Plants.
Civil Works/Building And Construction
Selgo Engineers Ltd does any kind of civil work ranging from bridge construction, drainage systems, tar making
of roads, pavements, cabro works etc We also build houses and apartments with the latest architectural taste of
elegance and beauty, be it a bungalow ,maisonnette or even residential flats you can be sure of quality and
value for your investment. With Selgo Engineers ltd you can be sure to get this entire package under one roof.
We are also endowed with modern technological skills required to handle the above jobs.
We are capable of efficiently offering a variety of engineering services as follows:
• Designing, draughting of both architectural & structural drawings as well as site supervision.
• Building up rates, quantities, preparation of bill of quantities & quality control of workmanship.
• Interpretation of architectural, structural, electrical& mechanical drawings from paper work to practical
work on site.
• Day to day monitoring site progress, monthly works programming, site management & materials
procurement.

• Over seeing re-measurements & take off from drawings,compiring overall report of working schedule,
maintaining records of all measurements, time sheet for day works, site .
• Taking safety control measures of workers
• Inspection of quality of delivered materials
CLIENTS:
o Panafric Hotel Nairobi
o SarovaWhitesands Beach Hotel,
o Chumani mixed High school - Kilifi
o Nyali beach international hotel - Mombasa
o Apcot Sourcing Systems Ltd - Mombasa
o Dormans Coffee Ltd - Nairobi
o Kajiei Secondary School – Kisumu
o Hosanna Apartments - Mtopanga Mombasa
o Jesus Anointing Centre Church - Mombasa
Contact persons
1: Samuel Atego Were [Managing Director]

SELGO COMPANY PROFILE 2015

Recommended

Recommended

More Related Content

What's hot

What's hot (20)

Viewers also liked

Viewers also liked (19)

Similar to SELGO COMPANY PROFILE 2015

Similar to SELGO COMPANY PROFILE 2015 (20)

SELGO COMPANY PROFILE 2015