result management system report for college project
A frame tripod easel plan
1. Project: Simple and High Page 1 of 18
SIMPLE AND HIGH
Making of this easel requires not much of your time and you don’t need to have some special
skills. All you have to do is to precisely make the items with the exact measurements as given in this
documentation, then join those parts together with bolts.
You can use various types of wood to make this type of easel, but we recommend birch, beech,
oak, maple, ash, alder, or some other types with similar qualities. Pay attention, to choose some well
dried wood.
Minimal size of the painting:
Width: 450mm (17,7 inches)
Height: no limits
Maximal size of the painting:
Width: max 1800mm (70,7 inches)
Height: 1100mm (43,3 inches)
NOTE: The measurements within this text and 2D documentation are given both in milimeters and
inches (in brackets). This website is based on ISO measurement unit system, which is the international
standard. I apologize to the people who use other measurement units; but I believe that measurements
given in milimeters and inches should be adequate for everyone who would like to build this project.
Besides that, on today’s Internet it is easy to purchase the ruler containing all the measurement
units and overcome the difficulties of any kind.
Make the components as given on drawings.
Project from www.craftsmanspace.com
2. Project: Simple and High Page 2 of 18
Parts List
Project from www.craftsmanspace.com
3. Project: Simple and High Page 3 of 18
2D Documentation
Project from www.craftsmanspace.com
8. Project: Simple and High Page 8 of 18
Assemblage Instructions
1. Use screws to fix the Lower Crossbar (item 3) to Front legs (items 1)
Project from www.craftsmanspace.com
9. Project: Simple and High Page 9 of 18
2. Use screws to fix the Upper Crossbar (item 2) to Front legs (items 1).
Project from www.craftsmanspace.com
11. Project: Simple and High Page 11 of 18
3. Use screws to fix Hinge (item 5) to the Upper Crossbar (item 2) by the middle. You can use various
types of hinges, which have standard assembly and can be found in many shops.
Project from www.craftsmanspace.com
13. Project: Simple and High Page 13 of 18
4. Use bolts to fix the other end of Hinge (item 5) to the upper end of the Back Leg (item 7).
Project from www.craftsmanspace.com
14. Project: Simple and High Page 14 of 18
5. Use Fastener to fix the Movable crossbar (item 8) at the height by your choice. You can drill the bolt
holes in diameter 8,5mm (0,33 inches) at heights by your choice.
Project from www.craftsmanspace.com
16. Project: Simple and High Page 16 of 18
6. Fix one part Screw Hook (item 11) to the Front Leg (item 1) and the other part to the Back Leg
(item 7).
Project from www.craftsmanspace.com
17. Project: Simple and High Page 17 of 18
7. Set the leaning of an easel that suits to your needs and then measure the proper length of chain. Cut
15-20 cm longer chain, so you could regulate the leaning of an easel.
Project from www.craftsmanspace.com
