1. 1. ESTER name font to be increased and give some space under the name.
2. Materials no. , Batch no. and Qty. values to aligned in center
3. Last '0' dicimal to be removed in qty. values
4. Gradation should be appear in 'A' or 'B' or 'C'
We required following seperate handover report's , asper below , same file you have to
be copied and give the said conditions
1. Amorphous Production Record Sheet (Film Grade) ,
Plant 1000,Movement type '101/102' ,storage location GB01 to GB13
2. Amorphous Production Record Sheet (SP Grade),
Plant 1000, Movement type '101/102' ,storage location GBAG and GBLD
3. Amorphous Packed Production Handover Record Sheet (Film Grade)
Plant 1000,Movement type '101/102' and '311/312', storage location 1003
4. Amorphous Packed Production Handover Record Sheet (SP Grade)
Plant 1000, Movement type '101/102' and '311/312' ,storage location 1003
5. SSP Production Handover Record Sheet (Film Grade) ,
Plant 1100, Movement type '101/102' and storage location 1103
6. SSP Production Handover Record Sheet (SP Grade)
Plant 1000, Movement type '101/102' and storage location 1009
7. SSP Packed Production Handover Record Sheet(SP Grade)
Plant 1000, Movement type '101/102' and '311/312' , storage location 1003
8. PET Waste Handover Record Sheet(SP Grade)
Plant 1000, Movement type '311/312' and '531/532 storage location 1003
9. PET Waste Handover Record Sheet(Film Grade)
Plant 1000, Movement type '311/312' and '531/532 storage location 1003
10. Product Gradation Report (SP grade)
Plant 1000 , Movement type '321/322' , storage location GBAG,GBLD ,1003,1007,1009
11. Product gradation Report (Film grade)
Plant 1000 and 1100, Movement type '321/322' , storage location GB01 to GB13 ,1003 & 1103
If possible Pl. put above reports in single folder in SAP .
2. Note : Product grouping condition is necessory to run each report perfectly. Discussed with
Mr.Rajeev kumar singh, due to month end process he is busy now. After 2nd june'17 we will sit
and finalice the grouping changes then inform you for further updation.
