An all in one IOT device prototype used to reduce the amount of Ping/Jitter due to large number of devices in a household.

1. IOTINKERING
The all-in-one IOT solution
Project by Daniel Jude Gonsalves and
Divyanshu Mishra (Minor Project)

2. WHAT IS IOT
• IOT stands for Internet of Things
• Electronic devices are connected to a network and can
be operated from a remote location
• Nowadays we use cloud-based app services which
require a good home network connection to connect the
latest IOT devices
• IOT is easy to deploy and run. However why haven’t
many people adopted this technology yet?

3. QUESTIONS WE ASKED
• Why is IOT on the difficult side to setup?
• Why do networks slow down when there are too many
IOT devices connected to the network?
• How do we deploy IOT in large homes and where wifi is
unreachable?
• How do we install IOT without inconveniencing other
devices connected on the same network?

4. THE SOLUTIONS
WE FOUND
• We built a single device, to replace the
functionality of many IOT devices
together
• Each device can be configured with a
speaker, light bulb or CCTV, which
remains 70% of all household devices
• If you do the math, that means reducing
the number of devices on home or
corporate Wi-Fi by around 50%
• This Increases range of the Wi-Fi, and
helps stabilize ping and jitter

7. LOWER IS
BETTER
• Normal IOT high Load
• Normal IOT low Load
• IOTinkering High
Load
• IOTinkering Low Load

8. HIGHER IS
BETTER
• Normal IOT high Load
• Normal IOT low Load
• IOTinkering High
Load
• IOTinkering Low Load

9. REPEATER BASED MODULE
We just didn’t reduce the number of devices to
increase bandwidth by making an all in one solution,
we also added a repeater into our hardware
A repeater amplifies the Wi-Fi Signal across a large
area, fixing the initial problem of Wi-Fi connectivity
to deploy IOT in large homes and institutions

10. 3D MODEL
PROTOTYPE CCTV
SPEAKER
PSU
WIFI ROUTER

11. THANK YOU