1. Why there is need for
Cable Jointing (Splicing) & Terminations ?
COMPAQ INTERNATIONAL (P) LIMITED
WWW.COMPAQINTERNATIONAL.COMinfo@compaqinternational.com
2. COMPAQ INTERNATIONAL (P) LIMITED
WWW.COMPAQINTERNATIONAL.COMinfo@compaqinternational.com
When you join two or more cables for further distribution, the joints so created
are very weak and can be damaged easily. There are many threats for a cable
joint such as environmental threats like rain, corrosion, wind and dust.
Additionally, chemical contacts and mechanical impacts can also damage the
joints. In order to protect these joints and terminals, you must use the cable
jointing and termination kits. Compaq offers you a wide range of cable jointing
and termination kits, which can be used under various loads starting from 1.1
KV to 72.5KV. The termination and jointing kits are available in both heat
shrinkable and cold shrink types; hence they are suitable for both indoor and
outdoor installation. They are available for both three core and single core
cables.
Cable Joint (Splicing) and Terminations
3. COMPAQ INTERNATIONAL (P) LIMITED
WWW.COMPAQINTERNATIONAL.COMinfo@compaqinternational.com
What is Joint?
The Connection between two cables is called Joint.
What is Termination?
The Connection to an equipment is called termination.
4. COMPAQ INTERNATIONAL (P) LIMITED
WWW.COMPAQINTERNATIONAL.COMinfo@compaqinternational.com
We require cable jointing for following reasons;
Cables are heavy and difficult to transport.
If there is long feeder line then joint is to be needed.
If there is fault in cable then for partial replacement joint is to be needed.
Why there is need for cable jointing ?
5. COMPAQ INTERNATIONAL (P) LIMITED
WWW.COMPAQINTERNATIONAL.COMinfo@compaqinternational.com
1) Straight through Joints
Such types of joints are used for long routes and for repair sections.
Types of Joints
2) Transition Joints
Such types are of special type joints used in between two different
Cables (Oil filled/XLPE).
6. COMPAQ INTERNATIONAL (P) LIMITED
WWW.COMPAQINTERNATIONAL.COMinfo@compaqinternational.com
3) T- Joints
Such types of joints are used for Branching a feeder.
Types of Joints
4) Branch Y Joints
Such types of joints are used for Branching a feeder.
10. COMPAQ INTERNATIONAL (P) LIMITED
WWW.COMPAQINTERNATIONAL.COMinfo@compaqinternational.com
We require cable Termination for following reasons;
Cables needs to be connected to an equipment or another cable.
End sealing kits are used to cover the cut end of cable against
moisture entry.
For terminating the cable the termination is needed.
Why there is need for cable Termination?
11. COMPAQ INTERNATIONAL (P) LIMITED
WWW.COMPAQINTERNATIONAL.COMinfo@compaqinternational.com
1) Indoor Terminations
The termination kit is used for indoor terminating of medium voltage
cables with belted paper insulation and lead or aluminium sheath. The
kit is suitable for three core cables, both armoured and non-armoured.
Types of Terminations
2) Outdoor Terminations
The termination kit is used for outdoor terminating of XLPE insulated
medium voltage cables with Aluminium/copper wire shield. The kit is
suitable for three core or single core cables.
14. For More information contact Compaq
sales team at
contact@compaqinternational.com
COMPAQ INTERNATIONAL (P) LIMITED
WWW.COMPAQINTERNATIONAL.COMinfo@compaqinternational.com