1. TMS Remote Tool Wear Offsets Solution
-Turnkey System-
System requirements: FANUC FOCAS-enabled controls with embedded or High Speed Ethernet installed
and enabled.
Solution includes: 17” industrial touch screen for standard configuration, or 23” wide screen format for
the customization option; sealed PC cabinet; Industrial PC and communications equipment; installation;
cables; system setup; training; and documentation.
104 Simpson Drive
Litchfield, MI 49252
Phone: (517) 542-4855
Fax: (517) 542-4856
www.totalmfgsys.com

2. Turnkey package details:
Industrial Touch Screen
Depicts benchtop yoke mount and enclosure
Superior Picture Quality
Bright 250 NIT display, 1000:1 contrast ratio
17” High 1280 x 1024 Resolution or
23” High 1920 x 1080 Resolution
Rugged Universal Mount Enclosure
NEMA 4/4X rated for wash-down applications
High temperature range, up to 50°C (122°F)
High shock and vibration specs
Tempered Glass or Touch Screen Window
High Reliability
Field MTBFs greater than 250,000 hours
40,000 hour backlight brightness half-life
3-year manufacturer warranty!
Multiple Mounting Options
Benchtop, Pedestal, Wall, and Arm Mounts

3. Electrical Enclosure
Type 4/12 36.00x24.00x10.00in ANSI Gray Enclosure
 Cooling Fan,
 Fused outlets
 Ethernet switch connectivity
 Battery Backup
 Industrial embedded PC.
 AC Disconnect
 External fused outlet with USB and Ethernet ports
Protects computers from harsh environments
Integrated cable management, mounting panels, and AC power distribution
Sealed to NEMA 4 for wash-down standards
Fan cools components without circulating outside air

4. As part of the Turnkey package TMS will install a Windows-based HMI (Human Machine Interface) and
communications solution connecting the associated CNC Machines in a given work cell via Ethernet. The
interface provides screens that allow tool wear offsets to be remotely adjusted. Each machine tool
connected to the HMI will have its own screen.
TMS will provide the following hardware and services:
 PC-based HMI (Human Machine Interface) with touchscreen interface
 Installation and mounting of PC-based HMI
 Ethernet cables and switches as required for connecting the HMI to the (3) CNCs
 Installation of Ethernet cables and switches
 Remote tool wear offset setup, documentation and training
Note: Customer to supply 120VAC power to HMI Panel
Example Screen Shots:
Communications Status Window Operator machine selection window
Password protected setup area Enable and disable offsets and create Labels,
Part numbers and machine name

5. Machine Alarms/Messages/History TMS Remote Offset Part Screen
Work cell usage with or without automation:
Customers are finding that setting up the remote offset touchscreen next to the gage
station in a large work cell not only saves the operator from having to walk to various
machines to make offsets, but it helps eliminate errors. The operator can see a
corresponding label next to each offset describing the associated measurement.
Immediate entry of the offset information while looking at the gage eliminates the need to
write down values that could get transposed incorrectly.
Call us today to schedule a demonstration at your
facility or ours!
Call: 517-542-4855
Ask for C. J.
cecil.lasich@totalmfgsys.com
www.totalmfgsys.com