1. IKIO ∣ Lexington ∣ Indianapolis ∣ Noida ∣ Haridwar ∣ Rourke ∣
Dongguan sales@ikio.com / +1 (844) 744 IKIO
IKIO Energy Savings Solutions
ikio.com
IKIO Approach to Energy Savings
 Electrical system analysis performed as a whole (all
loads) OR individual loads (such as lighting)
 Customized Energy Savings Solution to address KW, kWh
reduction and improve power quality
 Solution implementation with least disruption to client
operations
 Client internal energy savings initiatives are not
disrupted unless better savings could be achieved using
IKIO solution
 Utility bills analysis for savings opportunities
 Robust Measurement & Verification using IPMVP
IKIO Solution
 LED Lighting
 Power Quality Improvement
 HVAC Performance Improvement
 Refrigeration Performance Improvement
 Compressed Air System Optimization
 Customized Power Factor Correction addressed at the
loads or at the Panels/MCC
Loads addressed
Equipment
Lighting
Air-Conditioning
Refrigeration
Resistive
IKIO BUSINESS PROCESS
Key IKIO Differentiators
 Holistic energy savings approach vs.
individual load approach
 Robust Measurement & Verification: IKIO
uses IPMVP (International Performance
Measurement & Verification Protocol) to
measure and verify the savings.
 IKIO LED manufacturing operations produce
highest quality lighting products at lowest
cost.

2. IKIO ∣ Lexington ∣ Indianapolis ∣ Noida ∣ Haridwar ∣ Rourke ∣
Dongguan sales@ikio.com / +1 (844) 744 IKIO
IKIO LED LIGHTING
IKIO manufactures a wide range of commercial, industrial, and residential LED lighting in its world class ISO 9001
certified facilities. Replacing old lighting such as metal halides, fluorescent, and more with our LEDs can save up to
70% in energy. Visit ikio.com for commercial and industrial lighting fixtures that when implemented can produce great
savings for any business.
IKIO POWER QUALITY SOLUTIONS
Power quality is an important aspect to consider when implementing holistic energy saving solutions. To address
power quality concerns, IKIO uses four key strategies of power conditioning: voltage optimization, current reduction,
harmonics filtration, and power factor correction.
 Voltage is stabilized with a dynamic fast acting capacitor bank.
 Current is reduced by using a real time dynamic reactive power compensation system to reduce copper losses
I2
R.
 Harmonics filtration is performed by installing custom designed reactors tuned to the 5th or to the 5th and 7th
harmonics.
 Power factor is improved by adding KVAR (kilovolt amp reactive) to the electrical system.
Our process to optimize power quality begins by assessing the current data with power quality analyzers that
continuously measure, record, and store data. Next, we will create a simulation report for the client which will
include energy savings and its effects on the network. Our solutions can utilize equalizers and transformers which
optimize current, harmonics, and voltage. Finally, we analyze and compare the energy consumption before and after
the solutions implemented.
IKIO INTELLIGENT COMPRESSOR OPTIMIZATION
Optimizing HVACR (air conditioning, refrigeration, and heat pump) units is a great opportunity for energy savings.
HVACR units’ compressors (specifically the motor) consume about 70% of the total energy used by the units as a
whole. The compressors can use up to 35% of the total energy used by most buildings employing HVACR systems.
IKIO uses intelligent compressor optimization to save an average 15% of the HVACR kWh to combat this waste. The
intelligent compressor device is an electronic control system which collects data for temperature versus time when
the compressor is on or off. This is used to calculate the optimal run time for each compressor. Control modules
connect to switches located between the thermostat and each compressor. The devices are installed in series with
existing controlled solutions (e.g. Thermostats). The goal of the add-on controlling strategy is to produce an
increased amount of cooling while the compressor runs, additional to any existing controlling strategy. This will
achieve the same amount of cooling desired, but in a shorter time, thus saving energy.