Here are the two effective methods of how to remove burn marks out of carpet. You can do it yourself or hire professional carpet Repair Company to do the job. For professional carpet repair firm, call us today at (800) 656-9862 or visit http://creativecarpetrepair.com/burns/

1. HOW TO FIX BURN HOLES IN CARPET
THE ULTIMATE GUIDE ON
JUNE 28, 2017

2. One of the problems you must deal with, at some point in your home is a
hole in carpet. It could be due to burn by cigarette, or hookah. It could also
be caused by pets and due to corrosive substance such acid pouring on the
carpet. In all these instances, you must know how to fix burn holes in
carpet. You may do it yourself, or may hire a carpet repair company to do it.

3. Here is a simple guide on how to fix a burn in a carpet.
The First Method:
This method is applies where the hole is minor, that is, where only the
carpet fibres are affected, and the hole does not affect the carpet
padding.

4. The Tools Required
Scissors
Glue

5. The Procedure Of Repairing:
Use scissors to cut out the burnt portion of the carpet.
Snip away carpet fibres from a remnant of that carpet, or from a hidden
part of the carpet, such as inside closet or near wall.
Use glue to stick the fibbers on the carpet, effectively concealing the burned
spot.

6. The most important thing here is
to ensure the fibres to fill the hole
are of same pattern and colour as
the burned carpet. After gluing
the fibres and effectively
concealing the hole, give them
time to stick. Do not walk over the
carpet or clean it.

7. The Second Method:
This is the hookah or cigarette burn repair as it involves fixing serious burns
which affect not just the carpet fibres but also the carpet padding.

8. The Tools Required
Scissors
Mild detergent
Utility knife
Double side tape or glue

9. The Procedure Of Repairing:
By use of the scissors, carefully cut the burned portion of carpet out.
Using mild detergent, clean all the affected area with sponge, then rinse.
From a remnant of the carpet, or scrap, cut out portion of carpet, which
is slightly larger than the spot in which the carpet it is going to be fitted.
Ensure that the colour and patterns match, and the fibres also
run in same direction.
Place the new piece of the carpet over the burned spot.
By use of the utility knife, carefully cut around its edges. Depending on
the extent of the burn and hole, you have to cut up to the carpet just
below the hole or dent created by the burn, but avoid cutting all
the way to the padding.

10. Lift out the burnt piece of carpet. Ensure that the new carpet piece fits in its
new location. If not properly fitting, carefully and gently trim until if
effectively matches and fits the new location.
By use of double sided tape or glue, apply new piece of carpet to the hole or
affected area.
Leave it there for several hours to dry. Do not walk on that area of the carpet
until you are sure that the glue has dried and the potion is permanently
affixed in its new location.
These are the two methods of how to remove burn marks
whether you do it yourself or hire professional carpet Repair
Company to do the job.

11. Carpet Stretching Pet Damage
Carpet Cleaning
Stairs RepairCarpet Patching
Seam Repairs
If you have a carpet problem and want to get
creative solutions. Call us today at
800-656-9862 for.....