2. Objectives:
• List down and give the specific tools and equipment
needed in preparing and maintaining fish/shrimp
nurseries.
• Differentiate tools from equipment.
• State the function of each tools and equipment.
3. Activity: ( Group class activity
• *Group students in 3 and provide each group with materials
needed.
• Instructions: The learners instructed to read again the
objectives/goal for this day. After reading, figure out in
their mind the tools and equipment needed in preparing
and maintaining fish/shrimp nurseries. Do it in 10 minutes.
If you're done post your work on the board but don't show
the content.
4. Analysis:
•What are the tools and equipment needed in
preparing and maintaining fish/shrimp
nurseries?
•Can you differentiate tools from equipment?
•State the function of the tools and equipment
you've listed.
5. Farm/Fishery Tools
• There are varieties of hand tools, designed for specific purposes.
They are available in various types, shapes and sizes with different
degrees of hardness and varying configurations for specific
purposes.
6. • 1. Hand tools are used throughout the world by
industry, railroads, foundries, contractors‘
carpenters, automotive body men and hundreds
of others, including home repair services.
• 2. Each hand tool is designed for a particular job
and should be used for that purposes only.
• 3. Using a tool other than its intended purpose
leads to various damages to the tool and can
cause discomfort, pain or injury.
7. Classification of Hand Tools According to
Requirement
1. Cutting, Pinching, Gripping Tools –
–These tools are used for cutting, pinching, and
gripping purposes.
Examples are pliers and cutters.
8. 2. Striking Tools
• These are the most widely used tools and most
often abused tool. Chiseling, punching and
riveting can be done properly using striking tools.
Examples are hammers and chisels.
9. 3.Driving Tools
• These are tools designed to insert, tighten,
loosen, remove screws, bolt, nails and other
pointed objects or hard turn items by applying
torque
• Examples are screwdrivers, nut drivers, hand
wrenches, and T-handle wrenches.
10. 4. Struck or Hammered Tools
• These tools are used for forcing a bolt, pin, or
rivet in or out of a hole.
• Examples are punches, nail sets, and chisels.
11. 5. Measuring Tools
.- use to measure the length or distance of an
area from one point to another.
Examples : meter stick, rule, push pull rule
-is a measuring tool used to establish whether a surface is a true
vertical or a true horizontal
-consists of a small glass tube containing alcohol or similar liquid
and an air bubble;
*Level (instrument)
Example: Plastic hose with Water, Box-Beam Levels
12. Farm/Fishery Equipment
• Right choice and proper operation of farm
equipment contribute to the success in operating
a farm. Farmers/fishermen should familiarize
themselves with the uses of different farm tools
and equipment including safety measures to be
observed in operating a farm
17. Tools
•devices that facilitate work, specifically denote a
small manually operated device
Equipment
•instruments needed in performing a service; the
set of articles or physical resources serving to
equip a person or things; an instrument used in
an operation or activity.
