1. (3) SP Function
Click the [SP Function] button to display the following dialog box.
Set a function for [Switch Action] in the [Action (SP Function)] dialog box.
For the setting of switch actions and applicable models, refer to the following.
(4) Screen Switching
Make the following settings to switch windows using the switch.
For details of window switching, refer to the following.
2.5 Setting Go To Screen Switch
• Setting of Action (Screen Switching) dialog box
Item Description Model
Screen Type Select the type of the window to be switched.
Select the action of switching screen.
Select this item to switch to the base or window screen specified by the screen number.
After selecting, set the base/window screen number of the switching destination.
Fixed
Click the [Browse] button to display the screen image dialog box.
Make the settings while checking the image of the currently edited screen on the dialog box.
Select this item to switch to the screen of base screen number which was displayed previously.
Back Select this item to switch to the base screen of which screen No. was displayed previously.
Next Screen (Previous/History) As GOT can store the displayed screen number including the current base screen, up to 10 base
screens can be switched based on the history.
Select this item to switch to the base or window screen specified by the screen number,
according to the ON/OFF status or the current value of the specified device.
Device
Before setting the device, select the data type of the monitor device. (Bit/Signed (BIN16)/BCD16)
After setting the device, click the [Detail Setting] button to set the action.
Specify the target screen number when switching screens.
Screen No.
This item is available only when the screen to be switched is a base screen.
2-8 2.2 Setting Switch

2. (5) Station No.
1
When setting the station No. switching function with the touch switch, set the following actions.
2.6 Setting Change Station No. Switch
FIGURES
2
TOUCH SWITCH
3
Item Description Model
LAMP
Select the action of switching station No.
Host Select this item to monitor the station No. connected with GOT.
Select this item to switch the monitor target to other station.
4
Other
Next Station Set the network number and station number to be switched to in decimal.
Select this item to switch to the station, specified by the No., based on the ON/OFF status of
CHARACTERS
current value of the specified device.
Device
GRAPHIC
Select the data type of the device to be monitored. (Bit/Signed BIN16/BCD16)
After selecting the device, click the [Detail Setting] button to set the action.
Set the target to be switched.
Project : Select this item to switch the whole project by station number.
Mode Screen Type : Select this item to switch the specified screen by station number. 5
When selecting [Screen Type], set the following.
NUMERICAL INPUT
Screen Type : Select the screen to be switched.
NUMERICAL
DISPLAY/
6
ASCII DISPLAY/
ASCII INPUT
7
DATA LIST
8
HISTORICAL DATA
LIST DISPLAY
2.2 Setting Switch 2-9

3. (6) Key Code
When setting a key code to the switch, specify the following action.
2.9 Setting Key Code Switch
Item Description Model
Specify the key code.
(Fundamentals) Appendix.5 Key Code List
Numerical/ASCII Input : Select this item to input the key code for numeric value input/ASCII input.
Alarm/Data List : Select this item to input the key code for data list, user alarm list display, system
alarm list display, alarm history display, advanced user alarm display or advanced
Key Code Type system alarm display.
Historical Trend Graph/Historical Data List*1
: Select this item to input a key code to the historical trend graph or the historical
data list display.
Document Display*1 : Select this item to input a key code in the document display.
For a single switch, only one of the key codes above can be set.
Select this item to input a numeric value or character using the key code.
ASCII After selecting this item, input the numeric value or character. Then, click the [Convert to Key
Code] button to automatically convert into the key code.
Code Setting
Select this item to set an action by a key code.
After selecting this item, select and set the action.
Action
(Fundamentals) Appendix.5 Key Code List
*1 Not available for the GT11, GT10.
(1) Specifying multiple key codes
Multiple key codes can be registered to one switch.
By registering multiple key codes, switches for inputting character strings at a time can be created.
  
  

  
  
  
  
  
  
  
  
  

If a switch to which multiple key codes are registered is arranged on a usercreated key window, only the first
key code can be executed.
When inputting key codes in the advanced alarm, only the first key code can be executed.
(2) Character code reading/writing order
The reading/writing order of the character code set to the switch can be selected according to the specification
of the controller to be monitored.
6. ASCII DISPLAY/ASCII INPUT
2 - 10 2.2 Setting Switch

4. (7) Key Window Display
1
When setting the key window display switch to a switch, specify the following action.
2.8 Setting Key Window Display Switch
FIGURES
2
TOUCH SWITCH
Item Description Model

Specify the position (upper left coordinate value) where the key window
Key Window is displayed.
Position X : Specify the coordinate value of the X axis. (0 to 639)

Y : Specify the coordinate value of the Y axis (0 to 479) 3
LAMP
Setting the key window display target object and the key window 4
The object that has the same user ID as the one specified at [User ID for a key input and data change] in the Action
tab is taken as the target object.
CHARACTERS
The key window that is set in the key window setting in project or screen units is displayed.
(Fundamentals) 4.5 Key Window Setting
GRAPHIC
(8) User ID for a key input and data change
5
This user ID specifies the object to be operated when operating advanced alarm, historical trend graph or others
NUMERICAL INPUT
with the key code.
NUMERICAL
Specify the same value for the [User ID for a key input and data change] of the switch and the [User ID] of each
DISPLAY/
object.
• Setting of switch and advanced alarm
6
ASCII DISPLAY/
ASCII INPUT
7
DATA LIST

8
HISTORICAL DATA
LIST DISPLAY
2.2 Setting Switch 2 - 11

5. (9) Change Order
To change the order of action, specify as shown below.
Item Description Model
Executes in the order from the action displayed at the top first.
Since the key code is executed first, the order of action may not be changed.
The third and later actions can be changed by the user.
Click this button to change the order of the selected action to one earlier.
Order of
Click this button to change the order of the selected action to one later.
Action
Click this button to set the order created by the [Up] button/[Down] button.
(The item cannot be used with the operation panel.)
Click this button to clear the order created by the [Up] button/[Down] button.
(The item cannot be used with the operation panel.)
2 - 12 2.2 Setting Switch

6. 1
Style tab

FIGURES
2
TOUCH SWITCH




3

LAMP


 4
Item Description Model
CHARACTERS
This item is available when [Bit-ON/OFF] or [Word Range] is selected for [Lamp (Timing to change shape/text)].
Change a shape Select this item to set four different images using the lamp on/lamp off status in combination with the key touch on/key
GRAPHIC
based on the key touch off status.
touch state For the key touch on status and the key touch off status, the shapes can be switched. However, the texts cannot be
switched.
Preview list
Displays the status when the device turns on or off, and when the touch switch is pressed twice. 5
[Press Twice] is displayed when [Press Twice] is set for [Delay] on the [Extended] tab.
NUMERICAL INPUT
Collectively set
ON/OFF shape This item is available when [Basic Figure] is selected for [Shape].
NUMERICAL
in the case of Select this item to collectively change the shapes of touch switches except [Press Twice].
DISPLAY/
Basic Figure
Shape Set the touch switch shape.
This item is available when [None] is selected for [Shape].
Select this item to reverse the touch switch display.
6
Reverse Switch This item cannot be selected when [Press Twice] is selected in the preview list. To select this item, select other items
Area than [Press Twice] in the preview list.
ASCII DISPLAY/
When [Change a shape based on the key touch state] is selected, the touch switch display is reversed by switching
ASCII INPUT
between the key touch on status and the key touch off status.
Frame Color Select the frame color of the touch switch shape.
Switch Color Select the lamp color of the touch switch shape.
Background Select the background color and the pattern for the touch switch shape. 7
Color The selected pattern in the switch color is displayed on the background color.

Shape Attribute   
Pattern  
DATA LIST
 

Blink Select the blinking pattern of the touch switch. (None/Low/Medium/High)
Blink Scope Select a blink area. (Shape and Text/Shape only) 8
HISTORICAL DATA
LIST DISPLAY
2.2 Setting Switch 2 - 13

7. Changing a shape based on the key touch state
The following shows examples when using a combination of switching images according to the device status and
the status whether the touch switch is touched or not.
  
  
 

  


  
 
 
 
 
 
 
 
 
 
 
2 - 14 2.2 Setting Switch

8. 1
Text tab
For touch switches, the comment set for basic comment or comment group can be used as the texts displayed on the
object by selecting a text type.
The text types are described below.
FIGURES
2
TOUCH SWITCH
3
LAMP
4
CHARACTERS
GRAPHIC
Item Description Model
Text Set a text to be displayed by directly imputting it.
Indirect Text
5
NUMERICAL INPUT
(Basic Set a comment of basic comment.
Comment)
NUMERICAL
Comment
DISPLAY/
Set a comment that has been set for comment group.
Group
For basic comment and comment group, refer to the following. 6
(Fundamentals) 4.11 Comment Setting
The setting items differ depending on text type.
ASCII DISPLAY/
ASCII INPUT
Setting items of each text type are shown on the following pages.
7
DATA LIST
8
HISTORICAL DATA
LIST DISPLAY
2.2 Setting Switch 2 - 15

9. (1) Text

Item Description Model
Displays the status when the device turns on or off, and when the touch switch is pressed twice.
Preview list
[Press Twice] is displayed when [Press Twice] is set for [Delay] on the [Extended] tab.
OFF=ON Select this item to match the ON setting to the OFF setting.
Set the copy range.
Copy Range All Settings : Copies all text settings.
Text Only : Copies texts only.
Copy OFF
Used to copy the set attribute.
ON /
Copy OFF ON : The OFF attribute is copied to the ON attribute.
Copy ON Copy ON OFF : The ON attribute is copied to the OFF attribute.
OFF
Font Select a font for the text to be displayed.
• 6 8dot font • 12-dot high quality Mincho • 16-dot high quality Gothic
• 12-dot standard font • 12-dot high quality Gothic • TrueType Mincho
• 16-dot standard font • 16-dot high quality Mincho • TrueType Gothic
Text Size • Stroke • Windows font
For details of each fonts and size, refer to the following:
(Fundamentals) 2.5 Specifications of Applicable Characters
Select a character set available for the specified font.
Script
(Fundamentals) 2.5 Specifications of Applicable Characters
Common settings Select an effect for the text.
of Display : Displays the text in italic characters.
Position
: Displays the text in underlined characters.
Text Color Select a color for the text to be displayed.
Select a display format to the text.
: Displays the text in bold format.
: Displays the text in solid format.
: Displays the text in raised format.
The display format is not available for multiple settings.
Solid Color Select the color of the shadow when the button or the button is selected.
(Continued to next page)
2 - 16 2.2 Setting Switch

10. 1
Item Description Model

Select the position where the text is to be displayed on the
Display Position object.   
FIGURES
(Center/Top/Bottom/Left/Right) 
Input the text to be displayed.
Up to 32 characters can be entered.
Text
Press the [Enter] key to input a new line of the end of the first line. 2
(A line feed is counted as two characters.)
TOUCH SWITCH
Select the text position.
Text Settings
Alignment : Select the horizontal position.
: Select the vertical position.

Set the number of dots for the distance between the text and
 3
Offset to Frame
object frame. (0 to 100)
LAMP
4
CHARACTERS
GRAPHIC
5
NUMERICAL INPUT
NUMERICAL
DISPLAY/
6
ASCII DISPLAY/
ASCII INPUT
7
DATA LIST
8
HISTORICAL DATA
LIST DISPLAY
2.2 Setting Switch 2 - 17