Kalamazoo Industries has updated their model K12-14MS enclosed wet saw to now include a semi-automatic power downfeed system as standard. The wet saw is designed for slicing metal samples in metallurgical laboratories to inspect internal properties and features controls to produce repeatable, clean cuts. Key features include a full enclosure, adjustable feed rate, dual vises, coolant nozzles, internal lighting, 5HP motor, and interchangeable wheel arbors. Options allow for oscillation cutting, a T slot table, and safety interlocks.

1. PRESS RELEASE
Date: June 2015
Release: Immediate
Contact: Scott Allen
scott@kalamazooindustries.com
Kalamazoo Industries model K12-14MS enclosed wet saw
now comes with power downfeed as standard
Kalamazoo Industries model K12-14MS enclosed wet cutting metallurgical saw
now has a semi-automatic power down feed as standard equipment. The saw is
designed for metallurgical laboratories that need to slice through sections of
metal samples, such as coupons, to inspect their internal properties. The power
downfeed controls the feed rate to produce repeatable, bright, clean cuts.
The model K12-14MS saw features a full enclosure with a semi-automatic
air/oil power down feed and an adjustable 0-12 FPM feed rate, with momentary
override for rapid approach. Other features include dual moveable 4-inch screw
vises, dual coolant nozzles, internal halogen light, a 5HP, 1725 rpm motor, and
a 1-inch wheel arbor that accepts a 12-in or 14-in wheel. To ensure the highest
possible quality cutting, the wheel is not included because it must be specially
ordered for the type of metal being cut. The saw has a capacity up to 2-1/2-inch
solids and 3-inch shapes. Options include oscillation cutting for large sections, a
T slot table, and door interlocks.
All Kalamazoo Industries machines are manufactured in the USA.
# # #