A TEC Rocket Mill Mobile
•
1 like•927 views
The document describes a mobile grinding mill called the Rocket Mill RM 2.00 single developed by A TEC Production & Services GmbH. The mill consists of one grinding chamber that is approximately 2 meters in diameter powered by 315 kW. It can grind material from 250 mm to 15 mm in one step, saving a shredding step. Some benefits of A TEC's grinding technology are size reduction in one step, easy operation, maintenance, and drying effect during operation. The Rocket Mill RM 2.00 single is installed in a shipping container for compactness and easy installation.
![A TEC has developed a mobile grinding mill, the
Rocket Mill® RM 2.00 single, to demonstrate the
benefits of A TEC’s grinding technology.
The mill consists of one grinding chamber with
approx. 2m diameter and 315kW installed power at
the main drive. This will give roughly the half
capacity of the double chamber Rocket Mill® RM
2.50 double.
A TEC alternative fuel preparation technology offers
the following primary benefits compared to
conventional technologies:
20ft. High Cube Sea Container
ROCKET MILL MOBILE
MOBILE MILL FOR ALTERNATIVE FUEL PREPARATION
2 2
TECHNICAL DATA
RDF for main burner 90% < 25-30 mm
PROCESS DATA
RDF for main burner 90% < 50 mm
Compact design
Small foot print
Easy erection
CHARACTERISTICS
Basic data of Rocket Mill RM 2.00 single
Dimensions: 6,058 x 2,438 x 2,891 m
[LxWxH]
Weight: approx. 22 t
Drive Unit: 1 x 315 kW
Rotor Speed: 750 rpm
Throughput: 6-7 t/h
Specific Power consumption: 30-35 kWh/t
Output size: 90 % < 25 mm
~ 50 % < 10 mm
Throughput: 10-12 t/h
Specific power consumption: 20-25 kWh/t
Output size: 90 % < 50 mm
~ 50% < 15 mmSize reduction from 250 mm to 15 mm in one
grinding step
Saving of one shredding step
Easy to operate
Easy maintenance
No knifes
Different output fuel particle sizes for main
burner and calciner possible
Drying effect during operation
Significant reduction of fuel costs
Reduction of CO2 emissions
Requires only two fuel preparation steps
Separated FE and non-FE materials can be fed
back to the recycling process
Reduction of coal consumption
Due to the compact equipment the required
installation space is very small. Additionally only
small connecting works to the existing equipment
are necessary.
Rocket Mill® RM 2.00 single is a semi mobile version
installed in a container. This ensures:](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Recommended
More Related Content
Similar to A TEC Rocket Mill Mobile
Similar to A TEC Rocket Mill Mobile (20)
More from A TEC Group
More from A TEC Group (13)
Recently uploaded
Recently uploaded (20)
A TEC Rocket Mill Mobile
- 1. ROCKET MILL MOBILE A TEC Production & Services GmbH Finkensteinerstraße 9 9585 Gödersdorf AUSTRIA phone: +43 4257 3600 office@atec-ltd.com www.atec-ltd.com Production Plant Construction GmbH, Austria, Eberstein Technical Center, Austria, Gödersdorf A TEC Production & Services GmbH Austria, Gödersdorf
- 2. A TEC has developed a mobile grinding mill, the Rocket Mill® RM 2.00 single, to demonstrate the benefits of A TEC’s grinding technology. The mill consists of one grinding chamber with approx. 2m diameter and 315kW installed power at the main drive. This will give roughly the half capacity of the double chamber Rocket Mill® RM 2.50 double. A TEC alternative fuel preparation technology offers the following primary benefits compared to conventional technologies: 20ft. High Cube Sea Container ROCKET MILL MOBILE MOBILE MILL FOR ALTERNATIVE FUEL PREPARATION 2 2 TECHNICAL DATA RDF for main burner 90% < 25-30 mm PROCESS DATA RDF for main burner 90% < 50 mm Compact design Small foot print Easy erection CHARACTERISTICS Basic data of Rocket Mill RM 2.00 single Dimensions: 6,058 x 2,438 x 2,891 m [LxWxH] Weight: approx. 22 t Drive Unit: 1 x 315 kW Rotor Speed: 750 rpm Throughput: 6-7 t/h Specific Power consumption: 30-35 kWh/t Output size: 90 % < 25 mm ~ 50 % < 10 mm Throughput: 10-12 t/h Specific power consumption: 20-25 kWh/t Output size: 90 % < 50 mm ~ 50% < 15 mmSize reduction from 250 mm to 15 mm in one grinding step Saving of one shredding step Easy to operate Easy maintenance No knifes Different output fuel particle sizes for main burner and calciner possible Drying effect during operation Significant reduction of fuel costs Reduction of CO2 emissions Requires only two fuel preparation steps Separated FE and non-FE materials can be fed back to the recycling process Reduction of coal consumption Due to the compact equipment the required installation space is very small. Additionally only small connecting works to the existing equipment are necessary. Rocket Mill® RM 2.00 single is a semi mobile version installed in a container. This ensures: