As there is huge increase in global economic level, the need of additional power supply is required today. Shaftsinking is also called as shaft mining, which is used to excavate a vertical or non vertical tunnel from top drown. It is very important to provide the electricity generation sources, which even operates in peak period.
1. Shaft Sinking Trenchless Technology
As there is huge increase in global economic level, the need of additional power supply is required today.
Shaft sinking is also called as shaft mining, which is used to excavate a vertical or non vertical tunnel
from top drown. It is very important to provide the electricity generation sources, which even operates in
peak period. It becomes very difficult to use shaftsinking method in solid rock, where there is less water
content. Shafts are usually in circular or rectangular and lined with wood, masonry, concrete, steel or cast
iron. Shaft operations are categorized into three parts. Reaching up to the rock head, sinking through the
rock and sinking through the abnormal difficult ground. The sinking cycle include many operations such
as drilling, blasting, mucking, hoisting, shaft lining and some auxiliary operations.
In drilling method three types of cuts are made such as wedge cut, step cut and pyramid cut. Pyramid cut
is used most often. To support shafting method two types of lining is used namely permanent and
temporary. As the new technologies developed it becomes essential to use the new techniques in
shaftsinking. Some of the new techniques used such as piling system, cementation, freezing method,
grouting and shotcrete. Blasting is the best method used for shaftsinking.
The methods of shaftsinking are categorized into three groups, which are as follows:
Benching method, spiral method and full bottom method. In case of benching method, one half of the
shaft is drilled and other half is left as a sump. This type of drilling is done by hand. Countries like
Canada used spiral method, where the shafting is done in spiral way. Use of equipments plays an
important role, where large amount of word is done. The third method, which is full bottom method, is
used in either rectangular or round sections.
Impacts followed in shaftsinking:
The shafts sinking have the capability to block the streets and roads, which cause traffic around it.
Cutting some trees and cleaning the area of construction and bad effects on soil, which make bad
vibrations.
How does shaftsinking processed?
Normally shaftsinking through rock is done by blasting. Electricity is passed through to fire the material,
when the holes are drilled. In ordinary rectangular shaft the lining consists of timbers 20 or 30 cm. Shafts,
which are permanent would be circular. In the places where excessive water is used, cast-iron tubing is
preferred.
2. There shaftsinking is used for many purpose. It is mainly used for both underpinning and wet caisson
construction. These shafts are used in applications such as hydro electric projects, water supply, waste
water shafts and tunnel projects. Vertical shaft sinking machine is used in such process, where it consists
of special type of units that are used in both stable and unstable soils.
It is very essential to select the best shaftsinking service provider. Companies like terra solutions use
modern equipment and offer shaftsinking services in United Kingdom.