2. I just received a text message that the primary well
is down and the alternate is now running.
What is the level of the water storage tanks?
Is the manure pump running?
Is the manure tank overflowing?
Are all pumps and compressors running efficiently?
What is the milk level of tank 2?
Is it time to turn on the flush system?
Time to send the pivot to position 1 with my cell phone app
Integrate the Entire Farm

3. Motor Control Center

4. Message Display
Alarms, tank levels, tank temperatures, wash cycles, etc.

5. Wireless Communication
PLC to control curtains,
lights and flush system.

6. Wireless Communication

7. Weather Station Interface
Lighting Controls
Flush Valve Controls
Curtain Controls

8. Weather Station

9. Water meter keeps track of PLC controls the water flow through plate cooler.
gpm and total gallons. Other If storage tank is low the valve opens more.
meters measure the water
going into the lagoon

10. PLC monitors storage tank
level, water pressure and controls the
speed of the water pumps. All
systems are redundant. All pumps
alternate automatically. Also, if a
motor fails, the alternate
automatically starts.

11. Filter Plugged Sensor.
Conductivity Meter.
Milk Flowmeter.

12. Touchpad HMI control. Another Tank level and temperature.
HMI on office computer

14. The milk weight in green is the amount
Alarms can be sent via of milk that has been pumped to tanker.
email or text message The milk weight in blue is the milk in the tank.
Press this button to view shipment history.

15. Who makes sure the processor pays for every load?
Press any date to see the daily shipments.

16. The driver is required to enter Ticket number and approved Route code before pump can start.

17. Press language button to view in other languages.

19. Press any numerical display
to view an historical graph
CoolingLogix
Compressor
Control
ParlorLogix
Milk/Wash Vat
Control

20. The blue is the actual vacuum level
and the red is the vacuum set point.
The green is what the vacuum pump
is doing to keep the vacuum constant.

21. Wash Cycle
Milk Fill
Empty Tank
Tank Temperature Monitoring

22. Pipeline washing cycles

23. Pumps alternate daily or if pump plugs.
Both pumps automatically run if system floods.

24. PLC monitors amperage and restarts
motors after power outages on every
motor on the farm. If pump or
compressor fails or is turned off the
PLC automatically turns on alternate
and an email or text message is sent.

25. Press the unlock to enter password.
Everything in this area is password protected.

26. All parameter are password protected. Press
button to go to specified parameter section

27. Operation and instruction manuals for
each part of the system.