Mastics (Glues), Waxes, Colour Enhancers,
Sealants, Wet-look products etc.
Entire range of abrasives,
brushes and edge pol...
GLUING AND FILLING PRODUCTS / MASTICS
Features: Jolly mastics for marble is formulated with combined synthetic resins. It ...
TIXO/LIQUIDO BIANCO (SOLID/LIQUID WHITE):
TIXO/LIQUIDO NERO (SOLID/LIQUID BLACK):
TIXO/LIQUIDO ROSSO VERONO (SOLID/LIQUID ...
Gel time → 4-5 min.
Stackability (25°C) → 10-30 min.
Workability (25°C) → after 24 h.
Packing: Available in KG1 packing.
J...
The Epoxy System, solvent free, has a soft consistency allowing also a vertical application. The
improved formula as for l...
Excellent for all types of filling and gluing works on marble granite:
BLU mastic is now available both Tixo and liquid in...
SHINERS AND COLOUR ENHANCERS:
EXTRA WAX ,SOLVENT BASE (CERAFLUIDA):
Liquid wax solvent based, particularly suitable to imp...
EXTRA LUX (TELUX):
BRILLO, SOLVENTBASED (AGER):
The Extra Lux self- polishing varnish is formulated with resins and very s...
QUICK:
This cream for marble, granite and stones has been formulated to give protection, polish and shine to all
treated s...
CLEANERS AND OTHER PRODUCTS
CLEAN:
Clean is a universal cleanser, that fit both for professional use and home work.
Suitab...
EPOXY / HIGH ADHERENCE SYSTEM
EPOXY SYSTEM FOR MARBLE AND GRANITE:
Ÿ Grind the slabs to grit 120 and leave them to dry for...
8110 (100:25 by Weight or 5:1.5 by Volume) EPOXY FOR BRAZILIAN GRANITE AND
COLOURED MARBLE:
8112 (100:25 by Weight or 5:1....
8000(100:25 by Weight or 5:1.5 by Volume) NO COLOUR CHANGE EPOXY FOR COLOURS
GRANITES:
5091 (100:35 by Weight or 5:2 by Vo...
5032 (100:37 by Weight or 4.5:2 by Volume) EPOXYFOR BLACK GRANITE:
5033(100:20 by Weight or 4:1 by Volume) SPECIAL POLYURE...
COLOURS:
Available in paste form in KG1 packing. They are available in Red,Black,Brown,White,Green,Beige,
Yellow and Blue ...
MOELLER CHEMIE
Chemicals For Engineered Marble:
R85 Composite Quartz Intensive Cleaner:
Is a special concentrated cleaner ...
S35 Stone Sealer – Matte Finish:
S35 is a ready to use colour enhancing surface sealant with a matte finish that
reduces t...
S32W Stain Protection – Water base:
S32W is a solvent free water based impregnator that reduces the penetration of
water, ...
R54/R80 Stripper Stain Remover:
R54 is a ready to use solvent based stripper for removing old impregnators, wax
treatments...
R77 Rust Remover for hard Stone:
R77 is a ready to use acid based cleaner that removes rust spots and stains from all acid...
SINT: (Grain ¾ - Lux 3000)
This is a tool employed in the finishing of marble and marble agglomerates.
Special chemical fo...
Alfa S.r.l., Italy manufactures
complete plants for feeding of the
granite gangsaws with automation of
the complete sawing...
STONERA SYSTEMS PVT. LTD
Tel : +9180 42666222 | Fax : 42666223 | Email : contact@stonera.com | Web : www.stonera.com
#793,...
Upcoming SlideShare
Loading in …5
×

Tenax ager, brushes for marble, granite, stone

1,836 views

Published on

http://www.stonera.com/alfa-pumps-STM.htm Call 080 2572 4700 for best quality Tenax agers, Brushes, Colour Enhancers, Water Based Sealants, stain removers & Rust removers for Marble, Stone & Granite at affordable prices in India. Email: contact@stonera.com.

Published in: Technology, Business
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
1,836
On SlideShare
0
From Embeds
0
Number of Embeds
1
Actions
Shares
0
Downloads
6
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Tenax ager, brushes for marble, granite, stone

  1. 1. Mastics (Glues), Waxes, Colour Enhancers, Sealants, Wet-look products etc. Entire range of abrasives, brushes and edge polishers for stones. Fiber net for Blocks & Slabs. Entire range of diamond tools including calibrating, polishing, cutting, profiling and diamond wires. Cleaners, Stain and Rust Remover for Stones Epoxies for stones and special system for Block reinforcement
  2. 2. GLUING AND FILLING PRODUCTS / MASTICS Features: Jolly mastics for marble is formulated with combined synthetic resins. It is mainly used for gluing and filling all types of marbles and natural stones. It has strong adhesive properties, becomes hard and perfectly polishable after drying time. They are available in Tixo, semisolid and liquid which facilitate application and fast drying properties quicken production lines. The liquid and semisolid versions are perfect for normal applications where as the tixo density is suitable for vertical applications. Instruction for use: Make sure to thoroughly clean whatever surface area you wish to bond together. Take from the tin the necessary amount of glue, using clean tools and add 1-3 gram of catalyst for 100 gm of product. They are available in ten colours – Beige, White, Black, Red, Basaltina, Grigio, Rosa Asiago, Rosso Verona, Jura Scuro, Verde and Dark Straw. Hardner paste is included. Their technical details are as follows: COLOURED MASTICS: Description Tixo Semisolid Liquid Density (g/l) 1800 1750 1750 V.O.C 58 60 65 Viscosity 1500 1100 10 Thickness 1100 800 - Colours: Different colors are available Gel time → 2-6 min. Dry to touch (25°c) → 5-20 min. Polishable (25°C) → after 30 min. Packing: LT1 are packed in box containing 6pcs, KG1L in box having 12pcs and KG0.25 in box having 9pcs. TIXO/SEMISOLID/LIQUID STRAW (SOLID/SEMISOLID/LIQUID PAGLIERINO): It is classic beige colour mastic used to fill holes, to join marble slabs,for bull nosing and to make joints in beige coloured marble. Packing: Tixo and Liquid straw inLT1, KG1L, KG0.25 and Semisolid in LT1.
  3. 3. TIXO/LIQUIDO BIANCO (SOLID/LIQUID WHITE): TIXO/LIQUIDO NERO (SOLID/LIQUID BLACK): TIXO/LIQUIDO ROSSO VERONO (SOLID/LIQUID ROSSO VERONA): TIXO BASALTINA/GRIGIO/ROSSA ASIAGO/ROSSO VERONA/JURA SCURO/VERDE AND DARK STRAW: Used for filling holes and making joints on white marbles. Packing: Available in LT1, KG1L and KG 0.25. Used for filling holes and making joints on black marbles. Packing: Available in LT1. Used for filling holes and making joints on Red marbles. Packing: Available in Lt1. Used for filling holes and making joints on different coloured marbles. Packing: Available in LT1 packing. They are clear mastics based on polyester resins. Hardner paste is included. The Liquid Transparent is suitable for filling horizontal slabs and remains clear even after the catalyst, and with time. The Tixo gold types come as a gel. It is very easy to apply, extremely versatile, and after catalysis, extraordinarily clear. It doesn't turn yellow with time. Gel time → 2-6 min. Dry to touch (25° C) → 5-20 min. Polishable (25°C) → after 30 min. Packing: Available in KG1 packing .Transparent liquids packed in a box containing 12pcs and Tixo gold in a box containing 6pcs. Jolly Glass is based on combined synthetic resins and it is mainly used to weld and fill all types of marbles and natural stones. With its very strong grip, it becomes very hard and perfectly polishable after hardening. In liquid and tixo densities, Jolly Glass is absolutely clear, suitable for particular works including filling travertine, leaving the typical marble's holes visible, and for artistic or precision works. It doesn't turn yellow with time. It supplied with liquid hardener. Their technical details are as follows: TRANSPARENTE LIQUIDO/TIXO GOLD (LIQUID TRANSPARENTE/SOLID TRANSPERENTE): JOLLY/TIXO GLASS(LIQUID/SOLID CRYSTAL): Description Liquid Tixo Specific Weight (g/l) 1100 1100 Viscosity 600 cP 250000 cP Colour Colourless Iced white
  4. 4. Gel time → 4-5 min. Stackability (25°C) → 10-30 min. Workability (25°C) → after 24 h. Packing: Available in KG1 packing. Jolly Glass is packed in box containing 12pcs and Tixo Glass in a box containing 12pcs. LIQUID GLASS/GLASS GEL FOR WET SURFACE (NEW PRODUCT): This mastic based on polyester resin is a revolutionary product. Suitable to weld or fill any humid or even totally wet marble. It can be added to water up to 10% of its volume without showing any failure in ht adhesion process.The catalysis takes place by using a traditional Hardner paste. Their technical details are as follows: Gel time → 4-5 min. Stackability (25°C) → after 10-30 min. Workability (25°C) → after 24 h. Packing: Liquid Glass is available in KG1 packing in a box containing 12pcs and Glass Gel is available in LT1 packing in a box containing 6pcs. Description Liquid Tixo Specific Weight (g/l) 1100 1100 Viscosity 600 cP 30000 cP Colour Red - Violet Red - Violet JOLLY HIGH GLUING POWER (NEW PRODUCT): This mastic with a superior gluing power is based on particularly tenacious polyester resins, for unbeatable adhesions compared with any other polyester products. It is therefore suitable for all works where a particular adhesion is required, but also provides all the other typical mastics features. Specifically ideal for reconstruction works and gluing works on granites. It is catalysed with hardener paste.Available densities: solid and liquid: available colours: clear and black. Packing: Available is KG1 packed in box containing 12pcs. EPOKITT EPOXY SYSTEM (RIVO 50): The Epoxy System Kit includes mastic and hardener in the ratio of 1:1 in weight, suitable for gluing marbles, granites and stones. The system is particularly needful in critical situations like those surfaces exposed to chemicals and atmospheric agents or particularly fragile supports, also suitable for adhesion between heterogeneous materials (brick, marble, granite, wood, aluminium, iron) and thanks to the high reactivity can also be used at low temperatures.
  5. 5. The Epoxy System, solvent free, has a soft consistency allowing also a vertical application. The improved formula as for laying and the easier application makes it the best solution for all most difficult situations. Their technical details are as follows: Description Liquid Tixo Specific Weight (g/l) 1100 1100 V.O.C - - Viscosity 2200 Pas 250 Pas Consistency 1800 Pas 200 Pas Colour Icy white Pale grey Ratio of catalysis 100 g 100 g Gel time (25°C) → 4 min. Setting (25°C) →after 10-15 min. Workability (25°C) → after 4-5 h. Packing: Available in set of KG2:KG1 (part A) and KG1 (part B) packed in a box containing 6sets. COLOURING PASTE: LINEA BLUE: The easy colour system allows any marble worker to obtain the right colour he needs for his own mastic, the shade he prefers, totally by doing it himself. Available in white, yellow, red, brown, green and black colours. Packing: Available in 80 gms packing It is a revolutionary range of professional products, totally styrene free , with a low environmental impact and exactly the same proven effectiveness as the similar solvent based products. Also it complies with European directives on environment and safety: the LINEA BLU range of products do not require any health warnings therefore helps to keep the working area free from any chemical risk. Working with the LINEA BLU range does not produce any dangerous waste and can be therefore disposed of along with ordinary industrial waste. Furthermore, the absence of volatile organic solvents stops the spread of any volatile components into the atmosphere, considerably increasing the performance of the product.
  6. 6. Excellent for all types of filling and gluing works on marble granite: BLU mastic is now available both Tixo and liquid in order to match most of the working needs. Packing:Available in KG1.25 in a box containing 12pcs. RESINS: The wide range of polyester and epoxy resins covers all professional end-user's needs , with many different products ,in order to satisfy all requests from modern building industry and restoration works. Unsaturated polyester resin , containing amino accelerator which allows the hardening of the product even at temperatures around 0°C.Liquid Hardner is included. R25(RESINT8,GOLDEN COLOURED): Specific Weight (20° C) (g/ l) →1.13 Viscosity at (23° C) →1500 Pas Packing: Available in KG1 packing in a box containing 12pcs. Clean carefully the surface to be treated. Mix the resin with the enclosed hardener in paste in the ratio of 3-5%. Impregnate the treated slab thoroughly. Wait for the treated slab to be perfectly dry (after about 1 hour) and then start polishing. BD-24 (Resin T-8,COLOURLESS): Clear polyester- based resin for marble and natural stones. Colourless and stable to light; suitable for filling and invisible gluing of slabs or to reinforce them by applying a fiberglass net on the underside. Liquid Hardner is included. Their technical details are as follows: Specific Weight (20°C) (g/l) → 1105 Solids by weight → 60% Viscosity → 150 cP Colour → Green - Blue Gel Time → 4-6 min. Exothemic peak → 11-18 minutes, 183-195° C Volumetric Shrinkage → 8.6% Packing: Available in KG1 packing in a box containing 12pcs. BLUE MASTIC WITHOUTSTYRENE: It is two components mastic based on acrylic and methacrylate high-boiling solvents and unsaturated polyester resins with a fast drying. The styrene free BLU mastic, with low solvent content, does not show any warnings or danger to human health, still proving the same effectiveness as the other solvent based mastics produced by ILPA. Take back carefully the surface to be treated. Mix the resin BD24M with the enclosed liquid hardener in the ratio of 3-5%. Impregnate the treated slab thoroughly. Wait for the treated slab to be perfectly dry (after about 1 hour) and then start polishing.
  7. 7. SHINERS AND COLOUR ENHANCERS: EXTRA WAX ,SOLVENT BASE (CERAFLUIDA): Liquid wax solvent based, particularly suitable to improve the support's brilliance after polishing. Apply a few drops of product on the perfectly cleaned surface, spreading with a clean cloth, and take off the excess with fine steel wool. Light resistant, doesn't turn yellow. Packing: Available in KG1 packing . Packed in a box containing 12pcs. EXTRA WAX ,WATER BASED (CERASEALUX): Liquid water based wax, suitable for floors. Used to clean and protect polished floors from stains and footmarks. It is easy to apply, gives you very high outcome, and doesn't leave any rings. Clean the floor thoroughly, pour a few drops of wax onto it, spread evenly with a damp cloth dilute with water (1 cup every 5 Lt of water). It can be used also for daily cleaning of the marble. Once dry, polish with a woollen cloth or polishing machine. Packing:Available in KG0.9 packed in a box containing 12pcs. EXTRA WAX, SOLID NEUTRAL (TEWAX): Solid wax, polishing and protective, based on concentrated active substances, Easy to apply, increases the “wet look”. Suitable for industrial use, ideal for manufactured products which require a better finish. Lay a small quantity of product evenly on the surface to be treated, using a clean cloth. Polish by vigorously rubbing with a woolen cloth. Better results can be achieved by using a machine provided with felt. Packing:Available in KG1 packed in a box containing 12pcs. EXTRA DROPS (EASYWET): It is the ideal products for the “wet look” on all antiqued materials and for finishing all external floors, showing up the original shade. It is applied on all natural materials, stone, granite, marble, with an old- looking finish, flamed, sanded. It also provides a good waterproof effect. Extra Drops is ready to use: apply with brush one or two coats , according to the desired final effect , and wait some minutes for complete drying Specific Weight (g/l) → 1440 Physical State → Liquid Colour → Clear Packing: Available in KG1 packed in a box containing 12pcs.
  8. 8. EXTRA LUX (TELUX): BRILLO, SOLVENTBASED (AGER): The Extra Lux self- polishing varnish is formulated with resins and very selected waxes; the mixture ensures flawless polishing on marble and granite. The formula has been developed to provide the treated surface with a lasting polish, even after exposure to atmospheric conditions. Lab tests have shown that marble treated with Extra Lux and then exposed to UV- A light for 40 days doesn't undergo any alteration. Extra Lux has a wide range of application, in all cases where traditional polishing may be difficult: corners, borders, edges, columns, etc, and on elements already installed. It is suitable to obtain “wet look”, even on unpolished display materials: blocks, slabs, tiles, etc. Apply with a buffer, cloth or paint brush, on completely dry and preferable rubbed up material: spread the varnish evenly and without scrubbing. According to desired effect, a second application may be done, approx. 15 min after the first coat.Total drying time depends on temperature, and requires approx 30 minutes. Specific Weight (g/l) →1440 Physical State →Liquid Colour →Clear Packing: Available in KG1 and LT0.2 packed in box containing 12pcs and 20pcs respectively. Liquid silicon based wax, used to renew the polish on marble, granite, natural stones and gres. It can be used to clean and protect kitchen and bathroom ceramic tiles from dirt and smog. The very high quality components of its formula provide a triple action on treated support removing grease and smog; polishing with highlighting of colours and veins; waterproofing and providing superior resistance to stains like water, wine and oil. Apply with a clean cotton cloth. After drying, which requires a few minutes, the surface must be polished with a soft clean cloth, it is advisable to work in a well ventilated area. Specific Weight (g/l ) →1270 Physical State →Liquid Colour →Slightly Opaque Packing: Available in LT0.75 packing in box containing 12pcs. BRILLO ,WATER BASED (AGER, WATER BASED): This product is a silicone emulsion for marble and granite. It increases and makes uniform the polish on marble and granite; it covers any marks left by abrasives, and protects the surface from stains. It has a good water-oil-proof capacity. Brillo water based is a water emulsion which allows transpiring on all treated surfaces. Specific Weight (g/l) → 1270 Physical State → Liquid Colour → Slightly Opaque Packing: Available in LT1 packed in box containing 12pcs.
  9. 9. QUICK: This cream for marble, granite and stones has been formulated to give protection, polish and shine to all treated surfaces. It water based and odourless formula also permits easy application in all “do it yourself” projects. The compound, which is free from abrasive agents, doesn't scratch surfaces. Use methylated alcohol to degrease the surface, apply a thin layer of the product with the supplied sponge or by felt polisher, after drying buff with a clean cloth. Avoid application under direct sunlight or at very high temperatures (over 35°C). Do not dilute and do not wet the surfaces to be treated, consume within one year from production date. Packing:Available to KG0.25 and KG0.75 packed in box containing 12pcs. WATER PROOFING AND ANTI STAINING CHEMICAL: DRAI ,SOLVENT BASED (PROSEAL): Drai is an excellent waterproof sealent, anti-stain, ideal for marble, granite ,brick, concrete and natural stones in general. It can be used successfully on floors, tables, working tops, kitchen and bathroom tops, on which the absorption of liquids like water, oil, coffee, wine will be avoided. It doesn't form any film, and penetrates deeply into any type of natural stones. It doesn't turn yellow or change the colour and the look of the treated material, and it allows perspiration. Antistatic protects from rain, smog and grease. Lay DRAI with a rag or a brush on the desired surface and distribute carefully and uniformly. It will totally dry up in some hours. In order to have the highest protection, it is advisable to repeat this operation several times. Specific Weight (g/l ) →800 Physical State →Liquid Colour →Colourless Packing: Available in LT1 packed in box containing 12pcs. DRAI, WATER BASED (SKUDO MARMO): Our water based waterproof is a fluorurate hydroalcoholic solution, ideal for treating marble, granite and natural stones (tuff, sanded stones, limestone, etc.). Due to the very strong link between carbon and fluorine, the fluorurate resin offers very high resistance to atmospheric agents, pollutants and UV radiations. The very high resistance features make this product particularly suitable for external protective treatments. Drai water based is a protective agent combining very good waterproofing and excellent oil proofing. Shake the product before use. It can be applied: by sprayng, with rollers or with brushes. For the application of several coats, spread the product wet on wet, due to the fact that the surface becomes hydro- repellent once it is polymerized. Specific Weight (g/l) → 800 Physical State → Liquid Colour → Colourless Packing: Available in LT1 packed in box containing12pcs.
  10. 10. CLEANERS AND OTHER PRODUCTS CLEAN: Clean is a universal cleanser, that fit both for professional use and home work. Suitable for cleaning marble, ceramic, gres, and synthetic floorings, without damaging the surfaces. It does not compromise the polishing on marble and it works also in small amounts; it is suitable for any kind of floor's maintenance. Packing: LT1 packed in box containing 12pcs. STRONG: Professional wax remover, suitable for any types of floors like marbles, granites, conglomerates like wood or parquets. It can be used as it is or diluted with water, better if with hot water in a ratio of 1:1 wet the floor with plenty of water and then rubbing with a brush or clothes. Suitable for old floors, before polishing with wax, in order to get a very good final result. Packing: LT1 packed in box containing 12pcs. SH 100: The crystallizer for marble gives a mirror gloss on floors in marble, terrazzo and similar stones. SH100 has a “glass” effect; therefore it removes the stone's unstable and restores them with the compounds of its special formula, its wax produces a durable final polish. Our SH100 is highly appreciated for its excellent reaction time and absence of opacity and yellowing, even a long time after application. SH100 is ready for use as supplied. Clean the surface to be treated carefully and distribute SH100, evenly using a spray tool. Then use a single – brush (approx.40 kg) , from 1.7hp to 170rev.p.min; using fine steel wool discs; it is recommended to treat small surfaces at a time , max 4sqm each time. Packing: LT1 packed in box containing 12pcs. PIETRANTICA: It a compound based on acids and water, suitable to get the antique look on marble, natural stones and chalky materials. It can be used both indoor and outdoor. Pietrantica gives to the marble that special 'oxidided' look, or the 'antique' look, already from the first coat, the products has to be poured on the surface to be treated in the quantity of a very thin veil, wait for about 5 minutes and then rinse with plenty of water. Packing: KG1 packed in box containing 12pcs.
  11. 11. EPOXY / HIGH ADHERENCE SYSTEM EPOXY SYSTEM FOR MARBLE AND GRANITE: Ÿ Grind the slabs to grit 120 and leave them to dry for 16-20hrs, so that absolutely no traces of water are found on the surface, especially on cracks. Ÿ Mix resin and hardener in the ratio specified by weight and apply the mixture uniformly on the full surface of granite. Ÿ Accumulate additional quantity of this mixture over the cracks/holes. Leave the slabs to dry for 20-24hrs. Ÿ Polish these slabs starting from grit120. 237 (100:50 by Weight or 3.5:2 by Volume) EPOXY FOR WHITE & EXPENSIVE MARBLE: 8115 (100:25 by Weight or 3.5:1 by Volume) EPOXY FOR LIGHT COLOUR CHANGE WITH HIGH GLOSS: 5035 (100:37 by Weight or 2.5:1 by Volume) EPOXY FOR LIGHT COLOUR CHANGE FOR MARBLEAND GRANITE): Two component epoxy system hardens slowly at room temperature. The hardened mass has a glass like appearance. It has excellent resistance to light. Used on material like Australian White, Onyx, Carrara etc. Gel time at 25°C → 3h 30 min to 4h 30 min Gel time at 60°C → 45 to 50 min Viscosity (at 25°C) → Medium Colour (of mixture) → Colourless Moving of slab after (at 25°C) → 2hrs45min Polishing of slab after (at 25°C) → 12h Two component, low viscosity, completely reactive epoxy system. Excellent mechanical and adhesive properties, good light stability. It is used for screening, priming and strengthening of marble and stone slabs. Gel time at 40°C → 70 to 80 min Viscosity (at 25°C) → 300 to 400 mPa's Colour (of mixture) → Pale yellow Moving of slab after → 1h 40 min Polishing of slab after(at 25°C) → 6h Uncharged, solvent-free two-component epoxy system with low viscosity. Fast curing at room temperature, even with high humidity levels. It give very high gloss to the stone. Specially designed for multi-coloured granite. Gel time at 25°C → 3 to 4h Gel time at 40°C → 80 to 95 min Gel time at 50°C → 40 to 50 min Pot life at 25°C → 30 to 40 min Moving of slab after → 2 hr Polishing of slab after (at 25°C) → 36h
  12. 12. 8110 (100:25 by Weight or 5:1.5 by Volume) EPOXY FOR BRAZILIAN GRANITE AND COLOURED MARBLE: 8112 (100:25 by Weight or 5:1.5 by Volume) PREMIXED BEIGE COLOUR EPOXY FOR ITALIAN MARBLE: 50100 (100:37 by Weight or 4.5:2 by Volume) EPOXYFORTRAVERTINE MARBLE: 8021(100:25 by Weight or 3.5:1 by Volume) NO COLOUR CHANGE EPOXY FOR WHITE GRANITE: Two component, low viscosity, completely reactive epoxy system. Hardening at room temperature or with heat. Excellent mechanical and adhesive properties. Gel time at 25°C → 2h 30 min to 3h 30min Gel time at 40°C → 70 to 80 min Gel time at 50°C → 30 to 40 min Viscosity (at 25°C) → Low Pot life at 25°C → 25 to 35 min Colour (of mixture) → pale yellow Moving of slab after → 1 h 40 min Polishing of the slab after (at 25°C) → 6 h Hardening time at 25°C → 10-15h Two components, low viscosity, completely reactive epoxy system, coloured Botticino version of 8110. Hardening at room temperature or with heat. Excellent mechanical and adhesive properties. Gel time at 25°C → 2h 30 min to 3h 30min Gel time at 40°C → 70 to 80 min Gel time at 50°C → 30 to 40 min Viscosity (at 25°C) → Low Pot life at 25°C → 25 to 35 min Colour (of mixture) → Botticino Moving of slab after → 1h 40 min Polishing of the slab after (at 25°C)→ 6h Hardening time at 25°C → 10 to 15h Two component epoxy resin fully reactive, high viscosity. Very low reactivity. It is used to fill Travertine holes and the filling is transparent. Gel time at 80°C → 10 to 15min Viscosity (at 25°C) → High Moving of slab after → 10h Polishing of the slab after (at 25°C) → 24h Two component epoxy resin fully reactive and no alteration slab colour. Semi rigid with excellent mechanical properties and adhesion. Used for impregnation and stabilization /strengthening of marble, granite and stone slabs. Particularly suitable for granite like Kashmir White, Imperial White etc. Gel time at 25°C → 12 to 15 min Gel time at 40°C → 7 to 9 min Gel time at 50°C → 4 to 5 min Viscosity (at 25°C) → Medium Pot life at 25°C → 1.5 to 2 min Colour (of mixture) → Pale yellow Moving of slab after (at 25°C) → 45 min Polishing of the slab after (at 25°C) → 4h
  13. 13. 8000(100:25 by Weight or 5:1.5 by Volume) NO COLOUR CHANGE EPOXY FOR COLOURS GRANITES: 5091 (100:35 by Weight or 5:2 by Volume) MEDIUM DARK EPOXY FOR MARBLE AND GRANITE: 50101 (100:35 by Weight or 5:2 by Volume) DARK EPOXYFOR GRANITE: Two component epoxy resin, excellent mechanical properties and adhesion. It is used for impregnation and stabilization/ strengthing of marble, granite and stone slabs particularly for light coloured materials such as Raw Silk, River White, Ivory Chiffon, Ivory Fantasy and Steel Grey. Gel time at 25°C → 40 min to 50 min Gel time at 40°C → 13 to 17 min Gel time at 50°C → 9 to 11min Viscosity (at 25°C) → Medium Pot life at 25°C → 3 to 4 min Colour (of mixture) → Colourless/ pale yellow Moving of slab after (at 25°C) → 1h Polishing of the slab after (at 25°C)→ 6h Two component completely reactive epoxy system. Semi rigid with excellent mechanical and adhesive properties. Hardens slowly. Used for marble and granite. It is specially designed for low porosity materials and those with very fine cracks.This gives dark finish with colour enhancement. Gel time at 25°C → 3h 20min to 3h 15min Gel time at 40°C → 1h 10min to 1h 20 min Gel time at 50°C → 50 to 55 min Viscosity (at 25°C) → Low Pot life at 25°C → 25 to 30min Colour (of mixture) → Colourless / pale yellow Moving of slab after (at 25°C) → 4h Polishing of the slab after (at 25°C)→ 24h Two component completely reactive epoxy system. Semi rigid with excellent mechanical and adhesive properties. Very slow hardening. Used for marble and granite specially designed for low porosity materials and those with very Fine cracks. Enhances with very dark finish. Gel time at 25°C → 8h Gel time at 40°C → 5h 30m to 6h Gel time at 50°C → 3h to 3h 30 min Viscosity (at 25°C) → Very Low Pot life at 25°C → 30 to 40min Colour (of mixture) → Colourless / pale yellow Moving of slab after (at 25°C) → 6h Polishing of the slab after(at 25°C) → 48h
  14. 14. 5032 (100:37 by Weight or 4.5:2 by Volume) EPOXYFOR BLACK GRANITE: 5033(100:20 by Weight or 4:1 by Volume) SPECIAL POLYURETHANE SYSTEM FOR BLOCK REINFORCEMENT 5020 (100:25 by Weight or 5:1.5 by Volume) EPOXY FOR NETTING OF MARBLE AND GRANITE: 50229 (100:86 by Weight or 1:1 by Volume) EPOXYBASED GLUE: Two component, black epoxy resin fully reactive. Very low reactivitywith excellent impregnation properties and light stability. Used for black granite to increase and uniform its colour Suitable for very narrow cracks capillarity. Gel time at 25°C →4h20min to 4h 50min Gel time at 40°C →2h 50 min to 3 h Gel time at 50°C →1h 30min to 1h 45min Viscosity (at 25°C) →Medium Pot life at 25°C →30 to 40 Colour (of mixture) →Black Moving of slab after (at 25°C) →4h Polishing of the slab after (at 25°C) →24h System based on thixotropic solvent andplasticizer – free poly urethane. The thixotropyoccurs when the two liquid components are mixed. It is used for grouting and sealing where high thixotropic values are required. Gel time at 23°C →15 to 25 min Viscosity →Thixotropic Block handling after →4h Block cutting after →24h Water absorption after curing for 1 hour at 100°C →0.5to 0.6% Two component epoxy resin fully reactive. High reactivity and hardening at room temperature. It is used for Marble and stones impregnation. Glass Fibers reinforcement. Gel time at 25°C → 70 to 90 min Gel time at 40°C → 60 to 70 min Viscosity (at 25°C) → 450 to 550 mPa's Colour (of mixture) → colourless/pale yellow Moving of slab after(at 25°C) → 1Hr 40 min Quick hardening, solvent-free, uncharged, thixotropic epoxy-based system. Grouting and sealing for wood, metal, plastics and abrasive objects such flap wheels, rollers, felt pads. Grouting cracks in marble and stone slabs. Gel time at 25°C (thickness: 1mm) → 50 to 60 min Gel time at 25°C (thickness: 3mm) → 13 to 15 min Gel time at 40°C (thickness: 1mm) → 25 to 30 min Gel time at 50°C (thickness: 1mm) → 15 to 20 min Pot life at 25°C (10cc) → 2 to 3 min
  15. 15. COLOURS: Available in paste form in KG1 packing. They are available in Red,Black,Brown,White,Green,Beige, Yellow and Blue colours.These colours are used for mixing with Epoxy Systems as per requirement. FIBER NET The two types of net are available with the following characteristics: Sl. No. Characteristics Fiber Net (from China) Garza 75 (from Italy) 1 GSM 64.4-75.6 65-75 2 Tensile strength: Warp Weft 700N/5cm 700N/5cm 1000N/5cm 700/5cm 3 Average Mesh Thickness - 0.34 + 0.03mm– 4 Normal Mesh size: 4x5 mm 4x6mm 5 Std. Width Available: 1.8 & 2meter 1.8 & 2 meter 6 Standard Roll Length 300meter 300meter 7 Standard Colour White White This can be used for applying at the back of slab to give the strength. This help in easy processing of slab like handling, polishing and transportation. This can also be used for block reinforcement. This help to maintain the integrity of material while and after cutting.
  16. 16. MOELLER CHEMIE Chemicals For Engineered Marble: R85 Composite Quartz Intensive Cleaner: Is a special concentrated cleaner for removing fatty, oily and greasy substances, general construction dirt, cement and grout smears, wax coatings and film built up from regular cleaning products from polished, honed, satin and brushed composite quartz materials. It is available in LT1 packing. S46 Composite Quartz Stain Protection: S46 is a ready to use special impregnator that reduces the penetration of water, dirt, oil and grease into polished, honed, brushed and satin finished composite quartz surfaces. It is available in LT1 packing. P11Composite Quartz care Cleaner: Is a mild cleaning concentrate for daily cleaning and maintenance. Highly active ingredients quickly and thoroughly clean and maintain all composite quartz and porcelain surfaces. With regular use, surfaces become more resistant to stains and easier to clean. It is available in LT1 packing. Chemicals for Porcelain/Ceramic/Vitrified Tiles: R 61 – Porcelain Tile Cleaner (CLEANER): An alkaline base cleaner for polished, honed and textured interior or exterior porcelain tile. R 61 removes construction dirt, wax finishes, soot, grease and oil. Recommended for initial cleaning prior to impregnation with S 43 Porcelain Tile Impregnator and for periodic maintenance. P15- Porcelain Tile Care Cleaner (POLISHER): P15 is a mild concentrated cleaner with highly active ingredients that clean and maintain honed, polished, textured and glazed porcelain tiles. P15 has been specially developed to enhance the appearance of porcelain wall and floor tiles and contains special ingredients that enrich the colour and structure of the surface. If used regularly, a resistance to stains is developed and the tiles will become easier to clean. Its water-soluble ingredients also prevent the buildup of film usually caused by soap residue. It is available in LT1 packing.
  17. 17. S35 Stone Sealer – Matte Finish: S35 is a ready to use colour enhancing surface sealant with a matte finish that reduces the penetration of water and dirt substances into honed, brushed, sandblasted, flamed or riven natural stone (soft and hard stones), agglomerates and terrazzo. Sealants For Finished Surfaces (Leather Finish, Honed Finish Etc) : S 43 – PorcelainTile Impregnator (SEALANT): Asilicone base impregnator specifically designed for polished, honed and textured porcelain tile. For Interior and exterior use. Excellent protection against dirt, water, oil and alkali. Highly suited for bathrooms, kitchens and eating area. S43 is 98% permeable, UV resistant and leaves surfaces looking natural.It is available in LT1 packing. S37 Stone Sealer – Satin finish: S37 is a ready to use colour enhancing surface sealant with a satin finish that reduces the penetration of water and dirt substances into honed, brushed, sandblasted, flamed or riven natural stone (soft and hard stones), agglomerates and terrazzo. The colour and structure of the surface will be enriched, leaving a satin finish. Facilitates regular cleaning and overall maintenance, especially on rough and textured surfaces. It is available in LT1 packing. S39 Stone Sealer – High gloss: Amodified acrylic base sealer which produces a tough, hard, and highly protective finish. S39 protects against water, dirt, oil, and citric acids. For interior and conditional exterior use for rough and textured mineral surfaces. Enhances the colour and texture, while leaving a high gloss finish. S39 is highly vapor permeable, UV resistant, and slip retardant. Not effective on polished, glazed or non-absorbing surfaces. It is available in LT1 packing. S40 – Jobsite Protector/Grout Release: Awater base acrylic coating for jobsite application for interior and exterior use on all mineral; especially for rough, textured and flamed finishes. S 40 prevents the adhesion of cement and latex/resin modified grouts to the surface, and possible staining that might result from grout pigments. It also protects the surface against other construction dirt, and facilities the later clean up.It is available in LT1 packing.
  18. 18. S32W Stain Protection – Water base: S32W is a solvent free water based impregnator that reduces the penetration of water, dirt and oil on soft and hard natural stone surfaces, agglomerates, concretes block, terracotta, brick and block paving, clay surfaces and unglazed tiles. Colour and texture will not be affected. It is available in LT1 packing. The colour and structure of the surface will be enriched, leaving a matte finish. Facilitates regular cleaning and overall maintenance, especlly on rough and textured surfaces. It is available in LT1 packing. Cleaners for Marble & Granite: R52 Oil and Wax Remover - Paste: For use on all new and existing interior and exterior natural and cast stone, agglomerate terrazzo, ceramic/porcelain tile and cement surfaces, regardless of surface finish. Comes in paste for; ready to apply. Very effective in removing wax, oil and silicone stains left behind from grouting/sealants. It is available in LT1 packing. Sealants For Polished Surface : S31 – Silane Impregnator: S 31 is a ready to use silane based impregnator that reduces the penetration of water and dirt into all natural stone surfaces (soft and hard stones), concrete and unglazed bricks. S 31 is vapour permeable, suitable for interior and exterior use, and will leave a little to no aesthetic change on the surface. Important: Clean surface thoroughly before treatment using R 55 Intensive Cleaner (diluted) followed by a flood rinse with water and allow at least 24 hours drying (max residual moisture of 6-8%) before sealing. S34N Stain Protection - Extra: S34N is a ready to use special impregnator which reduces the penetration of water, dirt, oil and grease into all natural stone surfaces (soft and hard stones), agglomerates and terrazzo. S34N is also suitable for polished surfaces. It is available in LT1 packing. Clean the area to be treated thoroughly and allow the area to dry for atleast 1 day (max. residual moisture of 2 to 4%).Apply S34N generously and evenly with a natural bristle brush or a roller with short fibers. Repeat treatment for very absorbent surfaces after 24 hours. Any remaining residue can be loosened and wiped off by using a soft clean cloth moistened with S34N.
  19. 19. R54/R80 Stripper Stain Remover: R54 is a ready to use solvent based stripper for removing old impregnators, wax treatments, vanish film built up from regular cleaning products, asphalt and bitumen, grease and oils from all natural and artificial stone surfaces. Ceramic and porcelain tiles, terracotta and brick and block paving. It is available in LT1 packing. R60 Moss and Mildew Remover: R 60 is a ready to use spray on cleaner for use on smaller surfaces. R 60 works fast to eliminate and prevent re-growth of moss, mould, fungus, lichens and mildew from steps, paths, gravestones, walls, garden ornaments etc. Polished surfaces are not damaged. R 60 is also extremely effective for bleaching organic stains caused by things such as coffee, cola, red wine, flowers, berries, fruits, fruit juices etc. R63 Concrete Film Remover: An extra strength, fast-acting, dilute acid type cleaner for all new and existing rough/textured interior and exterior natural and cast stone (use the milder R69 interior stone cleaner if acid fumes are a concern). R63 thoroughly removes construction dirt, grout residue, lime deposit, efflorescence, and rust from all surfaces. Not for use on polished/glazed surfaces. Avoid contact with metal; acid/fumes will cause etching. It is available in LT1 packing. R63 thoroughly removes construction dirt, grout residue, lime deposit, efflorescence, and rust from all surfaces. R55 Intensive Cleaner: R55 is a special concentrated cleaner for removing general construction dirt, emulsion paint wax coatings and residual film built up from regular cleaning products as well as oil, grease and light cement film from all natural and artificial stone surfaces. It is available in LT1 packing. R70 Outside Stone Cleaner – Acid free : R70 is a special long lasting acid free concentrated cleaner that removes general dirt eliminates and prevents the reformation of moss, mould and other vegetation from paths, patios, walls and steps made from natural and artificial stones and other forms of external paving. Even externally dirty surfaces will become clean and bright again. R70 does not damage polished surfaces. It is available in LT1 packing. R 75 – Exterior Stone Cleaner: R 75 is a special concentrated acid based cleaner that removes cement film, lime scale, mortar residue, rust stains and heavy duty construction dirt from all acid tolerant natural and artificial stone surfaces. The special rust-preventing additives in R75 make it especially suitable for cleaning rust susceptible hard stones, including those with polished finishes.It is available in LT1 packing.
  20. 20. R77 Rust Remover for hard Stone: R77 is a ready to use acid based cleaner that removes rust spots and stains from all acid tolerant hard stone. Special additives reduce the development of rust after treatment. Suitable for polished surfaces.. It is available inLT1 and LT5 packing. R79 Rust Remover for Soft Stone: Is a special ready to use cleaner for use on all natural and artificial stone surfaces that removes rust sports caused by iron fertilizer, metal furniture, heater leaks etc. R79 contains special rust inhibitors that reduce future rust development. R79 is especially suitable for polished marble and limestone. It is available in LT0.475 packing. P24 Liquid Stone Soap: P24 is a mild concentrated natural soap for daily use. The highly active ingredients quickly and thoroughly clean and maintain all natural and artificial stones, brick paving, clay tiles and unglazed ceramic and porcelain tiles. If used regularly treated surfaces increase their resistance to stains as P24 forms an invisible dirt repellent film that helps to support existing impregnation, making regular maintenance easier. It is available in LT1 packing. P 27 Re-Polishing Powder: Is a polishing powder for repairing and renewing the polish of marble and limestone surfaces, using special polishing machines fitted with a white nylon polishing pads.It is available in KG1 packing. P23 Polish Preserver: Amodified water base acrylic conditioner and maintenance sealer/cleaner for all honed and polished natural and cast stone. Exhibits excellent durability. Scuff, scratch, dirt resistant and slip retardant. Creates satin sheen on honed surface and gloss on polished surface with buffing. P23 is UV resistant and highly permeable.It is available in LT1 packing. POLISHERS/SHINERS :
  21. 21. SINT: (Grain ¾ - Lux 3000) This is a tool employed in the finishing of marble and marble agglomerates. Special chemical formulas and production techniques give a range of tools that prepare the surface of worked material for final polishing. By applying the Sint series of abrasives in sequence a better finish can be obtained on all types of marble and marble agglomerates, with a reduction in cost per sqm and an increase in productivity. Available in grains¾, 400,500, 600, 800, Lux2000and Lux 3000. 5- EXTRA POLISHERS: A suitable polisher for every kind of finish. The vast range of ABRA IRIDE polishers can deal with the different requirements of various finishes: from natural marbles, for slabs and tiles, to marble cement and marble resin agglomerates. LUX GRANITE: The granite polisher LUX GRANITE owing to its special composition always guarantees a high quality finish. The introduction of new production technology and the accurate choice of the raw materials allow obtaining a most reliable tool capable of meeting all demands. QUASAR: (Grain 120 – Lux 3000) Quasar is a tool with resin binder with an industrial diamond which uses a high resistant mechanical and thermic resin. This combination favors an excellent working removal and a low consumption of the tool, consequently reducing stopping of the machine and less waste of the used tools.Available in range of grains from 120, 180, 220, 320, 400, 600, 800, 1200, Lux2000, Lux3000. IRINEX FOR MARBLEAND GRANITE: (Grain 36 – 1000) Tools used for preparing the surface, for ageing, polishing etc. of marble, granite and any other natural stone, as well as ceramic and agglomerates. The abrasive filaments undergo a special treatment against heat ageing and they are particularly suitable to humid applications. The filaments can be normal on reinforced (R). They are suitable to both manual and automatic machines with one or more heads. They are produced in the following sectors: Frankfurt, Fickert 140-170 and Edge polishing. They are available as 36, 46, 60, 80, 120, 180, 240, 320, 500, 600, 800, 1000. ABRA IRIDE PRODUCTS EDGE POLISHER: (Grain 24 – 1200 – Lux / 5 Extra) Tools used for straight, bull nosing and chamfering of marble, granite, natural stones and agglomerates processing. Available in synthetic (or magnesite type) for complete polishing of marble. Available in grains 24, 36, 46, 60, 120, 220, 320, 400, 600, 800, 1000, 1200 and 5 Extra.
  22. 22. Alfa S.r.l., Italy manufactures complete plants for feeding of the granite gangsaws with automation of the complete sawing cycle. Alfa is one of the main suppliers of complete feeding plants to major gangsaw manufacturers. Officine Marchetti S.p.A., Italy manufactures Hydraulic tensioners, Automatic Power Units and Tie-rods since 1987. It is the major supplier to all marble and granite gangsaw manufacturers. A.M.I. S.p.A., Italy is working since 1956 and is the No. 1 Italian producer of steel grit for granite sawing. DIAMANTIRIDE FOR POLISHING MARBLE: (Grain 24 – 220) The new conception of production in the diamond sectors allows us to adapt the tool to every kind of polishing machine, there by guaranteeing performance of the highest quality. Available in grains such as 24,36,46,60,80,120,180,220.
  23. 23. STONERA SYSTEMS PVT. LTD Tel : +9180 42666222 | Fax : 42666223 | Email : contact@stonera.com | Web : www.stonera.com #793, 11th Cross, 27th Main Road, Sector - 1, HSR Layout, Bangalore - 560 102. INDIA

×